She-bang must be in first line to make sense.

Signed-off-by: Esben Haabendal <esben@geanix.com>

This way, all OpenHarmony services should hopefully be ready when connection to
hdcd is established, allowing more robust ACTS execution.

Signed-off-by: Esben Haabendal <esben@geanix.com>

adding //base/hiviewdfx/hiappevent in OPENHARMONY_PARTS
adding ${PN}-hiappevent package
fixing ActsHiAppEventJsTest ACTS tests

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

add and apply actsfeatureabilitytest-wait-between-testcases.patch

test/xts/acts/ActsFeatureAbilityTest: wait 8 seconds between each testcase

sometimes feature abilities fail to start because the previous testcase
still has't completely started or terminated its feature ability.
Increasing sleep time from 1 seconds to 8 seconds between each testcase.

Upstream-Status: Pending

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

test/xts/acts/ActsGetWantTest: wait 10 seconds between each testcase

sometimes feature abilities fail to start because the previous testcase
still has't completely started or terminated its feature ability.
Adding a 10 seconds wait time between each testcase.

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

- increment testcase timeout and START_ABILITY_TIMEOUT for actsfeatureabilitytest
- adjust testcase timeout from 60 seconds to 20 seconds
- adjust actsbmsmoduleusagerecordtest START_ABILITY_TIMEOUT from 30 to 15 seconds
- rename patch files

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

test/xts/acts: increase testsuite timeouts

sometimes testsuites execution are timing out because
the execution takes longer to finish.
Increasing some testsuite timeouts.

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

foundation/ace/ace_engine: disable graphics

The graphics rendering is slowing the system making some ACTS test suites to timeout.
Since we are aiming for certification for headless system, graphics stack 
should not be required.
Disabling graphics by skipping JSView::CreateComponent() execution.
In the future we will remove this patch when we the graphical part will be needed.

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

Adding and apply ParagraphTxt-ComputeLineBreaks-skip-sigsegv-code.patch

ParagraphTxt::ComputeLineBreaks() is causing a segmentation fault for some 
reasons. This is causing hap applications to crash, including ACTS test suites
and status bar.
As a temporary solution we skip the part of the code that
is raising the segfault. The side effect of this is that texts are 
not properly rendered.

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

The previous implementation of HiCollieCppTest used the 'ps -A' command
to check if a process had restarted, which was not reliable.
This patch adds the creation and removal of a file
'x_collie_watchdog_test_file' in the child process that is monitored,
and the test cases now verify the presence and removal of this file to
confirm that the process was restarted.
Also, this commit updates the build recipe in
openharmony-standard_3.0.bb to include the newly created patch file.

Signed-off-by: Kareem Zarka <kareem.zarka@huawei.com>

This happens at least 60 times a second, totalling at least 120 lines per
second. We are disabling them completely, so we don't even flood the debug
log.

Signed-off-by: Esben Haabendal <esben@geanix.com>

This simplifies and improves the hack added to libdrm to handle drivers (like
virtio drm) that does not support DRM_IOCTL_WAIT_VBLANK, and tries to return at
60 Hz points in time.

Signed-off-by: Esben Haabendal <esben@geanix.com>

Signed-off-by: Esben Haabendal <esben@geanix.com>

Signed-off-by: Esben Haabendal <esben@geanix.com>

Signed-off-by: Esben Haabendal <esben@geanix.com>

Signed-off-by: Esben Haabendal <esben@geanix.com>

regenerate patch from the ${S}/base/hiviewdfx/hilog patch directory, and
apply the patch to the subdirectory.
This allows `devtool modify openharmony standard` to properly apply
the patch in the external workspace. 

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

move OH_GRALLOC_TMP_DIR into the source directory and do not remove directory.
This allows devtool to properly build openharmony-standard from external workspace.

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

instead of using the absolute path using the ${S} variable, use an relative 
subdir path to copy the display_device.c file in the source directory.
This allows the correct build when using an external source directory, 
such as when using a devtool workspace.

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

This recipe builds a simple Yocto SDK style bundle, initially containing hdc and
xdevice tools.

As such, it can be used for running ACTS testcases.

Signed-off-by: Esben Haabendal <esben@geanix.com>

Signed-off-by: Esben Haabendal <esben@geanix.com>

Signed-off-by: Esben Haabendal <esben@geanix.com>

Signed-off-by: Esben Haabendal <esben@geanix.com>

Signed-off-by: Esben Haabendal <esben@geanix.com>

In OpenHarmony system applications HAP packages such as Launcher, SystemUI, Settings 
are located under /system/app directory. These packages are automatically installed and 
started at system initialization. These system apps are treated differently from
third party applications that can be installed using `hdc install`, for example 
they have a different UID range and different permissions (they cannot be uninstalled).

This fixes testcases ActsBundleManagerTest::getBundleInfo_1300 and ActsBundleManagerUninstallTest::uninstall_0600

Relate-to: https://gitlab.eclipse.org/eclipse/oniro-core/meta-openharmony/-/issues/21



Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

Signed-off-by: Esben Haabendal <esben@geanix.com>

Although there obviously is a default behaviour when parameters are not set, an
error message about missing parameters are logged, so let's just set the
parameters explicitly to avoid these "false" error messages.

Signed-off-by: Esben Haabendal <esben@geanix.com>

Yes, this is still not nice, but this is what we are doing for now.
We will fix it as we create systemd units for each service.

Signed-off-by: Esben Haabendal <esben@geanix.com>

The patch was a hacky way to allow starting of demo hap applications from a root user.
The proper way to start the demo apps is by running `aa start ...` from the system user.
For example:
```
$ hdc shell "su system -c 'aa start -a ohos.samples.clock.MainAbility -b ohos.samples.clock'"
```

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

remove test-xts-acts-Start-tests-from-onInit.patch because now the tests are properly
executed even without it. 
Probably after fixing a segfault problem in the graphics stack, the tests execution
have been fixed.

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

Fix DefPermission.hap filename typo which is causing a file not found error 
when running ActsContextTest ACTS tests. 
 
Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

START_ABILITY_TIMEOUT is 3000ms which is too short in our case, causing some 
testcases in ActsBmsModuleUsageRecordTest to exceed timeout. 
Increasing the timeout to 30 seconds.

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

OpenHarmony init system, is responsible for creation of some directories, handling 
permissions and running services with appropriate UIDs/GIDs. Currently in 
meta-openharmony we have everything run as root, which causes some issues.

Adding system user with UID 1000. 
Run system services as system user.

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

The default test timeout is 5000ms which is too short, causing some testcases
to exceed timeout. Increasing the timeout to 60 seconds.

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

OpenHarmony uses couple of UIDs/GIDs for running it's services.
Currently in meta-openharmony we have everything run as root, which 
causes some issues in starting abilities. As a temporary workaround
we are removing the Uid check.

Apply to foundation/aafwk/standard

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

RenderText::PerformLayout() is causing a SIGSEGV for some reasons. 
The error appears to be raised in the Measure method(). This is
causing hap applications to crash, including ACTS test suites.
As a temporary solution we are removing the part of the code that
is raising the segfault. The side effect of this is that texts are 
not properly rendered.

Apply patch to foundation/ace/ace_engine

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

A wrong permission mode causes ActsAppdatamagrJsTest ACTS test suite to 
fail because it fails to open /dev/ashmem due to a "Permission denied" error. 
Changing permission to /dev/ashmem: "chmod 666 /dev/ashmem" because 
it needs to be rw for all users.

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

currently /data directory has to be chmod -R 777 /data in order for services to work

one of possible manifestation of this not being done is create display failed! error in the logs

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

Currently, due to some services/graphics issues onShow callback is not being
called and therefore tests are not executed. For screen-less devices graphics
stack should not be required and therefore moving test execution to onInit

This patch allows ACTS tests output to be shown on the logs

Signed-off-by: Robert Drab <robert.drab@huawei.com>
Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

Robert Drab authored 2 years ago and Francesco Pham committed 2 years ago

Signed-off-by: Robert Drab <robert.drab@huawei.com>