Signed-off-by: Ettore Chimenti <ettore.chimenti@seco.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Gururaj Shetty authored 3 years ago and Andrei Gherzan committed 3 years ago

Convert all headings into title case.

Closes: https://booting.oniroproject.org/distro/oniro/-/issues/204


Signed-off-by: Gururaj Shetty <gururaj.shetty@huawei.com>

The blueprint docs had updated flashing instructions (enter bootloader, pyserial host dependency) which were missing in the machine docs. Sync them back.

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

This is no longer needed as we switched to a setup where we build bossac
with bitbake and use the internal version for flashing.

The result is a streamlined flashing experience where no extra
installation of the Arduino IDE and search for the PATH is needed
anymore.

Signed-off-by: Stefan Schmidt <stefan.schmidt@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

* Project rename
* adr directory removed
* Closes distro/docs#77

Signed-off-by: Gururaj Shetty <gururaj.shetty@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

* All project name replaced with tag
* definitions.rst reference added
* Closes: OSTC/OHOS/docs#77

Signed-off-by: Gururaj Shetty <gururaj.shetty@huawei.com>

Gururaj Shetty authored 3 years ago and Stefan Schmidt committed 3 years ago

Initially, Arudino did not enable USB CDC_ACM interface,
due to which once flashed, the user was forced to connect
an external USB TTL cable to connect the board.

This limitation is now resolved; hence, connecting USB
TTL cable information is removed.

Signed-off-by: Gururaj Shetty <gururaj.shetty@huawei.com>

    Add support for USB flash
    Converted note content to a sub section on install bossac
    This closes: OSTC/planning/hw-enablement#30

Signed-off-by: Gururaj Shetty <gururaj.shetty@huawei.com>

Davide Ricci authored 3 years ago and Stefan Schmidt committed 3 years ago

Signed-off-by: Davide Ricci <davide.ricci@huawei.com>

* Renamed All scenario OS to All scenarios OS.

Signed-off-by: Arul Kumaran <arulkumaran.devarajan@huawei.com>

* Fixed review comments, fixes issue
  https://git.ostc-eu.org/OSTC/OHOS/meta-ohos/-/issues/62

.

Signed-off-by: Arul Kumaran <arulkumaran.devarajan@huawei.com>

* Introduce new nRF52840-DK topic in supported boards, fixes issue
  https://git.ostc-eu.org/OSTC/planning/hw-enablement/-/issues/27

.

Signed-off-by: Arul Kumaran <arulkumaran.devarajan@huawei.com>

This speeds up the flashing process considerably.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

The build system outputs block allocation meta-data that, when used with
bmaptool, speeds up writing the disk considerably.

Also, the serial section is now obsolete as it is enabled with
debug-tweaks distro feature.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

This cleans and speeds up the flashing process considerably.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Details of the arduino-nano-33-ble.rst
How to flash
This closes OSTC/planning/hw-enablement#29

Signed-off-by: shettygururaj <gururaj.shetty@huawei.com>

* List the supported hardware devices which can be used as an
  altrnative for the respetive faulty device.
* New FAQ folder created under docs to accommodate all new FAQs
  related to meta-ohos.
* Reference to the FAQ provided from the relevant topics.
* This closes #59

Signed-off-by: shettygururaj <gururaj.shetty@huawei.com>

Apply many fixes re formatting of the document:
- Remove unnecessary quotation marks,
- Use ``backticks`` for inline code formatting,
- Fix incorrect break of a long TEMPLATECONF=.. line,
- Remove unnecessary break of `wget ...` line,
- Add/remove some spaces,
- Use ``#`` for comments in shell commands,
- Make GPIO capitalization consistent.

Signed-off-by: Wojciech Zmuda <wojciech.zmuda@huawei.com>

Add a document describing how to assemble setup for the
Smart Panel blueprint, how to build images for Avenger96
and Nitorgens, how to flash them and configure Home Assistant.

Add images with HA UI configuration examples and photo of
the assembled setup.

Signed-off-by: Wojciech Zmuda <wojciech.zmuda@huawei.com>

* Hardware supported boards modified to reference Supported Images.
* docs/index.rst modified to include Supported Images topic in toctree.

Signed-off-by: Arul Kumaran <arulkumaran.devarajan@huawei.com>

* All topics revised to reflect All scenarios OS instead of All scenario
  OS to maintain consistency, fixes issue#70

Signed-off-by: Arul Kumaran <arulkumaran.devarajan@huawei.com>

Acronym looks good in some places but in sentences the full name is more
readable.

Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@huawei.com>

External repositories for various distributions are left unchanged.

Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@huawei.com>

Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@huawei.com>

* 'pyOCD-flashtool -l' command syntax rectified as 'pyocd-flashtool -l',
 fixes issue#39

Signed-off-by: Arul Kumaran <arulkumaran.devarajan@huawei.com>

Sebastian Serewa authored 3 years ago and Stefan Schmidt committed 3 years ago

To reference those section labels of the documentation, so they can be referenced
from the other parts of the documentation.

Signed-off-by: Sebastian Serewa <sebastian.serewa@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>