I missed this in the earlier patch-set. I've added a note to the RAUC
recipe to allow people to notice this better than by trial and error.

Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@huawei.com>

Enable smoke, ltp, kselftest and perf tests on seco-c61.

Signed-off-by: Chase Qi <chase.qi@linaro.org>

Signed-off-by: Chase Qi <chase.qi@linaro.org>

Introduce variable CI_ONIRO_JOB_ARTIFACTS to allow build job to
customize what artifacts it needs to deploy.

Signed-off-by: Chase Qi <chase.qi@linaro.org>

Signed-off-by: Chase Qi <chase.qi@linaro.org>

Fail build job if the MACHINE variable not defined, otherwise build job will be
continued with the default qemux86-64 machine which is not desired.

Signed-off-by: Chase Qi <chase.qi@linaro.org>

Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@huawei.com>

As we add support for additional boards, doing it by copying and
modifying a file with relatively few parts changing got tedious.

The change adds half a dozen new variables for selecting the boot loader
type, various strings and directories. The defaults are safe, even if
unused, for all kinds of boards. The machine-specific overrides tune the
bootloader used by each board and provide proper identification strings.

Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@huawei.com>

For the moment this allows booting from USB storage. Ideally we would
have one config that works for eMMC, nvme, USB and SATA but we're not
there yet.

Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@huawei.com>

As we add support for additional boards, doing it by copying and
modifying a file with relatively few parts changing got tedious.

The change adds three new variables - RAUC_{COMPAT,SLOT_A,SLOT_B},
and defines them for the boards supported thus far.

Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@huawei.com>

Upstream released the kirkstone branch so we use the latest revision of
that. This bump includes a set of recipe bumps (including kernel and
firmware) and various other fixes and tweaks.

Fixes eclipse/oniro-core/oniro#520



Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

This enables us to build optional components in meta-rauc like casync.

Signed-off-by: Davide Gardenal <davide.gardenal@huawei.com>

Fixes #442



Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

All our revisions now are based on kirkstone. We have checked all the
revisions to correspond to the upstream kirkstone branches (when
available) and updated the ones that are a bit behind.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

These recipes have been upstreamed to meta-networking and are included
in the latest revision we use of it. No need to keep a copy around here.

https://git.openembedded.org/meta-openembedded/commit/?id=bb6a70a4638688ca971dc281d90627135f59ce0c
https://git.openembedded.org/meta-openembedded/commit/?id=47640c2235ebfca8abfa1524087893e1ece095d5
https://git.openembedded.org/meta-openembedded/commit/?id=b75d3b24618c735571e5d53f2574fefa3e75ce36



Signed-off-by: Stefan Schmidt <stefan.schmidt@huawei.com>

Update manifest to match upstream latest revision
Update bind bbappend version from 9.16.26 to 9.18.1 to match
upstream version

Signed-off-by: Davide Gardenal <davide.gardenal@huawei.com>

This revision adds configuration to support bootloader image building,
based on mainline U-Boot source and the board support patches.

Signed-off-by: Natalia Kovalenko <waykovalenko@gmail.com>

This is useful for the outer squashfs used to deliver a RAUC update
bundle.  The inner squashfs uses stronger compression. The outer is now
using zstd (since a5437196). Having two layers of strong compression
makes no sense, as it cannot offer any improvements, and is much heavier
on CPU and memory.

Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@huawei.com>

Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@huawei.com>

The configuration files are very similar to what is available for
Raspberry Pi 4. In general all the files, except for COMPATIBLE
setting can become identical over time, as we move to GPT partition
identifiers to identify the slots.

Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@huawei.com>

This script implements proper A/B update with automatic rollback.
Refer to sysota.grub(7) manual page for details.

The script should become built-into grub EFI executable but that will be
pursued separately.

Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@huawei.com>

Those are required by the upcoming grub.cfg boot script.

Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@huawei.com>

This allows using sysota with rauc-hawkbit-updater. It works around the
issue where r-h-u fails to talk to hawkbit whenever the post-install
handler reboots the system.

Set the delay to 180 seconds, which should be enough for the updater to
finish talking to hawkbit, and then some more.

Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@huawei.com>

Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@huawei.com>

This brings in initial support for working with GRUB.

The location has changed to Eclipse GitLab instance
with the GO_IMPORT of gitlab.com/zygoon/sysota. See the referenced
pull request for rationale on the latter part of this change.

Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@huawei.com>

Shared linking has caused some problems on x86, where sysotactl would
crash on an apparently-stray pointer. This looks like a compiler bug.

Shared linking mode causes Go's standard library to be built into a
large .so file and all applications link to that with the dynamic
linker.

Given that sysota is the only Go application in our image and that is
has only one binary, this does not bring meaningful savings. In fact,
without shared linking, the overall image size is smaller as unused
parts of Go stdlib are removed.

Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

This reflects the CI reality in the docs.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

This reflects the CI reality in the docs.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

This also includes a set of additional small tweaks:
1. formatting and small rewarding
2. explicitly use the kitkstone branch for repo init (this avoids
confusion and also saves us from repo edge cases where the default one
is ignored)

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

The file was refreshed using the script and generic project-wide text
available in
https://gitlab.eclipse.org/eclipse/oniro-core/docs/-/tree/main/contributing

.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

This change makes the git operations reference the project's name and a
generic project CI email.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

The EF infrastructure (GitLab) doesn't support image registry. This
change switches the container images to use the OSTC registry while
EF catches up[1].

[1] eclipsefdn/helpdesk#1108



Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

The relevant repository was now migrated to EF Gitlab so reflect that in
the comments mentioning the Dockerfiles.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

This change tweaks the CI comments and references to the EF migrated
repositories.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Some projects rely on additional tools, which are not used by the GN itself,
like readelf of strip being present in the GN toolchain definition and
therefore gn.bbclass should expose those as they are provided in the bitbake
build environment.

Signed-off-by: Robert Drab <robert.drab@huawei.com>

Signed-off-by: Pavel Zhukov <pavel.zhukov@huawei.com>

Right now, we do a remove in DISTRO_FEATURES, that, while we don't
neccessarily support them, due to the finality of :remove we force our
end users to not use them either.

By moving DISTRO_FEATURES:remove to DEFAULT_DISTRO_FEATURES:remove, we
allow end users to still use oniro.conf but add in those removed
features.

We also move IMAGE_FEATURES from a distro level var to the image.
IMAGE_FEATURES should generally be put in image recipes. This also gives
end users a way to use Oniro and work around our :remove defaults.

Signed-off-by: Eilís Ní Fhlannagáin <pidge@pidge.org>