Grzegorz Gwóźdź authored 2 years ago and Stefan Schmidt committed 2 years ago

We will not support those two machines in the future so that is why we remove them

Signed-off-by: Grzegorz Gwóźdź <grzegorz.gwozdz@huawei.com>

Luca Seritan authored 2 years ago and Andrei Gherzan committed 2 years ago

Graphic mode is supported for qemuarm-efi and qemuarm64-efi, so use this
by default.

Signed-off-by: Luca Seritan <luca.seritan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>
Signed-off-by: Luca Seritan <luca.seritan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>
Signed-off-by: Luca Seritan <luca.seritan@huawei.com>

    manifests/default.xml:      Add new project meta-seco-rockchip
    local.conf.sample:          Add seco-px30-d23 to MACHINE
    bblayers.conf.sample:       Add meta-seco-rockchip layer to BBLAYERS
    conf-notes.txt              Add seco-px30-d23 to supported machines
    machines-and-flavours.yaml  Add linux-seco-px30-d23 and linux-seco-px30-d23-extra jobs
    linux-flavour.rst:          Add seco-px30-d23 to supported machines
    machines-and-flavours.rst   Add linux-seco-px30-d23 job
    boards/index.rst            Add seco-px30-d23 to supported boards

    Add the seco-px30-d23.rst file representing the new Seco's
    JUNO board (SBC-D23) in the oniro project.

Signed-off-by: Natalia Kovalenko <waykovalenko@gmail.com>

Signed-off-by: Pavel Zhukov <pavel.zhukov@huawei.com>

The default compression has been changed from bzip to gz. Update
leftovers accordingly

Signed-off-by: Pavel Zhukov <pavel.zhukov@huawei.com>

With default network settings of runqemu script Oniro images start without
IP address assigned which may cause inconvenience for some users.
Using user network allows network access from the Oniro VM and
enables port forwarding for ssh access.

Signed-off-by: Pavel Zhukov <pavel.zhukov@huawei.com>

This also includes a set of additional small tweaks:
1. formatting and small rewarding
2. explicitly use the kitkstone branch for repo init (this avoids
confusion and also saves us from repo edge cases where the default one
is ignored)

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Ettore Chimenti <ettore.chimenti@seco.com>

Francesco Pham authored 3 years ago and Stefan Schmidt committed 3 years ago

Adding ovmf to runqemu commands since we switched to GRUB+EFI as boot solution. 

Without this argument it does not boot properly and remains stuck in "Booting from Hard Disk..."

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Gururaj Shetty authored 3 years ago and Andrei Gherzan committed 3 years ago

Convert all headings into title case.

Closes: https://booting.oniroproject.org/distro/oniro/-/issues/204


Signed-off-by: Gururaj Shetty <gururaj.shetty@huawei.com>

The blueprint docs had updated flashing instructions (enter bootloader, pyserial host dependency) which were missing in the machine docs. Sync them back.

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

This is no longer needed as we switched to a setup where we build bossac
with bitbake and use the internal version for flashing.

The result is a streamlined flashing experience where no extra
installation of the Arduino IDE and search for the PATH is needed
anymore.

Signed-off-by: Stefan Schmidt <stefan.schmidt@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

URL updated

Signed-off-by: Gururaj Shetty <gururaj.shetty@huawei.com>

* Project rename
* adr directory removed
* Closes distro/docs#77

Signed-off-by: Gururaj Shetty <gururaj.shetty@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

* All project name replaced with tag
* definitions.rst reference added
* Closes: OSTC/OHOS/docs#77

Signed-off-by: Gururaj Shetty <gururaj.shetty@huawei.com>

These are generic HW modules that can be used across several blueprints
to depict basic input/output interactions with the system.

Signed-off-by: Amit Kucheria <amit.kucheria.ext@huawei.com>

Gururaj Shetty authored 3 years ago and Stefan Schmidt committed 3 years ago

Initially, Arudino did not enable USB CDC_ACM interface,
due to which once flashed, the user was forced to connect
an external USB TTL cable to connect the board.

This limitation is now resolved; hence, connecting USB
TTL cable information is removed.

Signed-off-by: Gururaj Shetty <gururaj.shetty@huawei.com>

    Add support for USB flash
    Converted note content to a sub section on install bossac
    This closes: OSTC/planning/hw-enablement#30

Signed-off-by: Gururaj Shetty <gururaj.shetty@huawei.com>

Davide Ricci authored 3 years ago and Stefan Schmidt committed 3 years ago

Signed-off-by: Davide Ricci <davide.ricci@huawei.com>

* Renamed All scenario OS to All scenarios OS.

Signed-off-by: Arul Kumaran <arulkumaran.devarajan@huawei.com>

* Fixed review comments, fixes issue
  https://git.ostc-eu.org/OSTC/OHOS/meta-ohos/-/issues/62

.

Signed-off-by: Arul Kumaran <arulkumaran.devarajan@huawei.com>

* Introduce new nRF52840-DK topic in supported boards, fixes issue
  https://git.ostc-eu.org/OSTC/planning/hw-enablement/-/issues/27

.

Signed-off-by: Arul Kumaran <arulkumaran.devarajan@huawei.com>

This speeds up the flashing process considerably.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

The build system outputs block allocation meta-data that, when used with
bmaptool, speeds up writing the disk considerably.

Also, the serial section is now obsolete as it is enabled with
debug-tweaks distro feature.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

This cleans and speeds up the flashing process considerably.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

The OS will start to depend on a specific partition table and having to
maintain multiple qemu setups might not prove useful. Also, we have
encountered issues trying to boot wic images (disk images as opposed to
root filesystems) with qemu ARM machines.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Details of the arduino-nano-33-ble.rst
How to flash
This closes OSTC/planning/hw-enablement#29

Signed-off-by: shettygururaj <gururaj.shetty@huawei.com>

Gururaj Shetty authored 3 years ago and Davide Ricci committed 3 years ago

Heading updated for New Hardware Support
Configuration file changed from bulleted list to table format

Signed-off-by: shettygururaj <gururaj.shetty@huawei.com>