Convert hilogd into a systemd service

- Patch hilogd to use sd_notify(3) to send ready notification to systemd, and
  thus use as a Type=notify service.
- Add log and logd users and groups, with similar uid and gid as in OHOS.
- Place Unix sockets in /run/openharmony/hilog instead of /dev/unix/socket,
  enabling secure creaton and managing of these.
- Use systemd.socket units for the two Unix sockets, to allow creating with
  desired uid/gid and permissions, and allowing to use hilogd with systemd
  socket activation

Signed-off-by: Esben Haabendal <esben@geanix.com>

Signed-off-by: Esben Haabendal <esben@geanix.com>

Signed-off-by: Esben Haabendal <esben@geanix.com>

Signed-off-by: Esben Haabendal <esben@geanix.com>

This stops placing temporary files and Unix sockets in /dev, and use /run
instead.  This aligns better with FHS and makes it easier to handle permissions
safely if/when we decide to change uid/gid of the param service.

Signed-off-by: Esben Haabendal <esben@geanix.com>

Signed-off-by: Esben Haabendal <esben@geanix.com>

This ensures that when used in a systemd service, other units that depend on it
will only been started when the param_service is actually ready to respond to
requests.

Signed-off-by: Esben Haabendal <esben@geanix.com>

With ICU data file installed in /system/usr/ohos_icu this crash doesn't happen,
so we can safely drop this workaround.

Signed-off-by: Esben Haabendal <esben@geanix.com>

This includes a file needed by ICU, which when missing causes a segfault in
appspawn.

Signed-off-by: Esben Haabendal <esben@geanix.com>

resources to install missing file for ActsAmsZipfileUnzipfileSTest

The OpenHarmony ACTS test suite requires additional files to
execute the ActsAmsZipfileUnzipfileSTest. This commit adds a runtime
dependency to openharmony-acts-resources to install the missing files.
In order for the ActsAmsZipfileUnzipfileSTest test to execute
successfully.

Signed-off-by: Kareem Zarka <kareem.zarka@huawei.com>

for ActsAmsZipfileUnzipfileSTest

This commit adds a new recipe that installs the missing ACTS test files.
The files are then used by the OpenHarmony Standard recipe to place them
in the correct location for the ActsAmsZipfileUnzipfileSTest to execute.

Signed-off-by: Kareem Zarka <kareem.zarka@huawei.com>

Signed-off-by: Esben Haabendal <esben@geanix.com>

ceshi.txt and ceshitwo.txt are random text files needed to perform the
ActsAmsZipfileUnzipfileSTest,but were missing from the OpenHarmony
source tree.
They have been added to the 'files' directory, so that they can be used
by other recipes.

Signed-off-by: Kareem Zarka <kareem.zarka@huawei.com>

Signed-off-by: Esben Haabendal <esben@geanix.com>

Signed-off-by: Esben Haabendal <esben@geanix.com>

Starting OpenHarmony services is super slow (we are doing lots of sleep between
each service), so it is helpful to be able to follow the progress.

Signed-off-by: Esben Haabendal <esben@geanix.com>

Having noisy kernel messages on console makes the console output slightly less
usable in CI.

Signed-off-by: Esben Haabendal <esben@geanix.com>

She-bang must be in first line to make sense.

Signed-off-by: Esben Haabendal <esben@geanix.com>

This way, all OpenHarmony services should hopefully be ready when connection to
hdcd is established, allowing more robust ACTS execution.

Signed-off-by: Esben Haabendal <esben@geanix.com>

adding //base/hiviewdfx/hiappevent in OPENHARMONY_PARTS
adding ${PN}-hiappevent package
fixing ActsHiAppEventJsTest ACTS tests

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

add and apply actsfeatureabilitytest-wait-between-testcases.patch

test/xts/acts/ActsFeatureAbilityTest: wait 8 seconds between each testcase

sometimes feature abilities fail to start because the previous testcase
still has't completely started or terminated its feature ability.
Increasing sleep time from 1 seconds to 8 seconds between each testcase.

Upstream-Status: Pending

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

test/xts/acts/ActsGetWantTest: wait 10 seconds between each testcase

sometimes feature abilities fail to start because the previous testcase
still has't completely started or terminated its feature ability.
Adding a 10 seconds wait time between each testcase.

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

- increment testcase timeout and START_ABILITY_TIMEOUT for actsfeatureabilitytest
- adjust testcase timeout from 60 seconds to 20 seconds
- adjust actsbmsmoduleusagerecordtest START_ABILITY_TIMEOUT from 30 to 15 seconds
- rename patch files

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

test/xts/acts: increase testsuite timeouts

sometimes testsuites execution are timing out because
the execution takes longer to finish.
Increasing some testsuite timeouts.

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

foundation/ace/ace_engine: disable graphics

The graphics rendering is slowing the system making some ACTS test suites to timeout.
Since we are aiming for certification for headless system, graphics stack 
should not be required.
Disabling graphics by skipping JSView::CreateComponent() execution.
In the future we will remove this patch when we the graphical part will be needed.

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

Adding and apply ParagraphTxt-ComputeLineBreaks-skip-sigsegv-code.patch

ParagraphTxt::ComputeLineBreaks() is causing a segmentation fault for some 
reasons. This is causing hap applications to crash, including ACTS test suites
and status bar.
As a temporary solution we skip the part of the code that
is raising the segfault. The side effect of this is that texts are 
not properly rendered.

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

The previous implementation of HiCollieCppTest used the 'ps -A' command
to check if a process had restarted, which was not reliable.
This patch adds the creation and removal of a file
'x_collie_watchdog_test_file' in the child process that is monitored,
and the test cases now verify the presence and removal of this file to
confirm that the process was restarted.
Also, this commit updates the build recipe in
openharmony-standard_3.0.bb to include the newly created patch file.

Signed-off-by: Kareem Zarka <kareem.zarka@huawei.com>

This happens at least 60 times a second, totalling at least 120 lines per
second. We are disabling them completely, so we don't even flood the debug
log.

Signed-off-by: Esben Haabendal <esben@geanix.com>

This simplifies and improves the hack added to libdrm to handle drivers (like
virtio drm) that does not support DRM_IOCTL_WAIT_VBLANK, and tries to return at
60 Hz points in time.

Signed-off-by: Esben Haabendal <esben@geanix.com>

Signed-off-by: Esben Haabendal <esben@geanix.com>

Signed-off-by: Esben Haabendal <esben@geanix.com>

Signed-off-by: Esben Haabendal <esben@geanix.com>

Signed-off-by: Esben Haabendal <esben@geanix.com>

regenerate patch from the ${S}/base/hiviewdfx/hilog patch directory, and
apply the patch to the subdirectory.
This allows `devtool modify openharmony standard` to properly apply
the patch in the external workspace. 

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

move OH_GRALLOC_TMP_DIR into the source directory and do not remove directory.
This allows devtool to properly build openharmony-standard from external workspace.

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

instead of using the absolute path using the ${S} variable, use an relative 
subdir path to copy the display_device.c file in the source directory.
This allows the correct build when using an external source directory, 
such as when using a devtool workspace.

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

This recipe builds a simple Yocto SDK style bundle, initially containing hdc and
xdevice tools.

As such, it can be used for running ACTS testcases.

Signed-off-by: Esben Haabendal <esben@geanix.com>

Signed-off-by: Esben Haabendal <esben@geanix.com>

Signed-off-by: Esben Haabendal <esben@geanix.com>

Signed-off-by: Esben Haabendal <esben@geanix.com>