Oniro documentation recommends using of slirp option to have
network connection from/to the image in qemu. Adjust conf-notes.txt
to be consistent with the docs.

Signed-off-by: Pavel Zhukov <pavel.zhukov@huawei.com>

Document the change in the default user/password for the production
images.

Signed-off-by: Marta Rybczynska <marta.rybczynska@huawei.com>

This is required by meta-openharmony layer.

Signed-off-by: Esben Haabendal <esben.haabendal@huawei.com>

Signed-off-by: Esben Haabendal <esben.haabendal@huawei.com>

Create bbclass files in meta-oniro-core
that enable the user to activate the debug mode
in local.conf.

Activating it is equivalent to build -dev images
as of this commit.

Signed-off-by: Davide Gardenal <davide.gardenal@huawei.com>

Before updating to kirkstone, we had work in progress support for
qemu-generic-arm64. This requires meta-arm layer. With the kirkstone
update, this layer was dropped.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

This enables us to build optional components in meta-rauc like casync.

Signed-off-by: Davide Gardenal <davide.gardenal@huawei.com>

Update the names used for C61 targets, there are now two instead
of one before.

Signed-off-by: Marta Rybczynska <marta.rybczynska@huawei.com>
Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

C61 build has been split up from the target MACHINE=seco-imx8mm-c61 to
two targets, MACHINE=seco-imx8mm-c61-2gb and MACHINE=seco-imx8mm-c61-4gb,
depending on the memory on the card. Reflect that in the build
instructions.

Signed-off-by: Marta Rybczynska <marta.rybczynska@huawei.com>
Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

oe-core completely dropped the associated class and support:
https://lists.openembedded.org/g/openembedded-core/message/160848



This change drops the associated references in our build sample files.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Francesco Pham authored 3 years ago and Stefan Schmidt committed 3 years ago

Adding ovmf to runqemu commands since we switched to GRUB+EFI as boot solution. 

Without this argument it does not boot properly and remains stuck in "Booting from Hard Disk..."

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

Both layers are currently only targeting the linux flavour so we can
disable the warnings for the flavours where they are not in scope.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Both layers are currently only targeting the linux flavour so we can
disable the warnings for the flavours where they are not in scope.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

On post dunfell versions, the mixin layers are not needed anymore. Also,
the linaro optee layer is deprecated and the zephyr one was restructured
to include meta-zephyr-bsp.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

This will sync the local conf version with the metadata.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

This will sync the local conf version with the metadata.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

This will sync the local conf version with the metadata.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

image-mklibs was removed in oe-core due to python3 incompatibility and
lack of testing. This change drops them from local.conf sample files as
well.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

This commit adds support for the qemu-generic-arm64 machine as a basic
qemu machine for arm SystemReady devices. It requires
meta-arm-dunfell-backports in order to function.

Signed-off-by: Eilís Ní Fhlannagáin <elizabeth.flanagan@huawei.com>

The blueprint layer was the only layer having a dependency on the
homeassistant layer. With the meta-oniro-blueprint now handled
externally, as a separate repository, we can remove this dependency and
deal with it in the respective blueprint layer.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Blueprints will have a new home:
https://booting.oniroproject.org/distro/meta-oniro-blueprints



Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Layers order decides on the override of classes (layer priorities do
not work for this [1]). To override a class from poky we need to
move the overriding class (which is in meta-oniro-staging) before on
the layers list.

[1] https://www.yoctoproject.org/pipermail/yocto/2012-January/004379.html



Signed-off-by: Marta Rybczynska <marta.rybczynska@huawei.com>

Eilís Ní Fhlannagáin authored 3 years ago and Stefan Schmidt committed 3 years ago

This commit adds meta-zephyr-bsp to the manifest and to
bblayers.conf.sample for zephyr builds.

Signed-off-by: Eilís Ní Fhlannagáin <elizabeth.flanagan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

This updates the bblayers configuration sample following:
1. poky replacement by oe-core and bitbake
2. restructure repo workspace

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Pavel Zhukov <pavel.zhukov@huawei.com>

Robert Drab authored 3 years ago and Robert Drab committed 3 years ago

Currently ACTS are planned to be built together with OpenHarmony dependencies
in a single recipe using gn.bbclass. This renders all xts-acts related recipes
and the layer itself obsolete.

Closes: https://git.ostc-eu.org/OSTC/planning/maintenance/-/issues/18



Signed-off-by: robert.drab <robert.drab@huawei.com>

Signed-off-by: Stefan Schmidt <stefan.schmidt@huawei.com>

Change prefix for all DISTRO values as well as moving the distro config
files and includes. This needs to go together with the .ostc-ci change
to change our CI jobs for the new names.

Signed-off-by: Stefan Schmidt <stefan.schmidt@huawei.com>

The repository with the layer was changed in the git-repo manifest
and the GitLab rename happened separately. There is no way to coordinate
this across repositories better AFAIK.

Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@huawei.com>

Our download cache is temporarily out of order. Before it returns,
disabling it should speed up fresh builds, as the cache is gone and is
accessed repeatedly which wastes time.

Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@huawei.com>

FreeRTOS switched to use main branch instead of master while our code
still looks for master. Overriding of bb class is needed for the change
thus it requires change in the order of layers.

Closes: https://git.ostc-eu.org/OSTC/OHOS/meta-ohos/-/issues/132


Signed-off-by: Pavel Zhukov <pavel.zhukov@huawei.com>
Upstream status: Backport
Upstream commit: d4bd9d748a4223856bf92dd35ca088d1f319d189

Eilís Ní Fhlannagáin authored 3 years ago and Eilís Ní Fhlannagáin committed 3 years ago

Looking at allscenarios-image-common.inc I see some devel/dbg packages
in there. These really should be pulled into a development or debug
image as images that endusers would build off of for a production
environment should only contain the minimal packages needed to run the system.

This patch removes gdbserver and packagegroup-net-tools (iperf3) from common
and puts them along with other useful EXTRA_IMAGE_FEATURES into two new images:

allscenarios-image-base-dev
allscenarios-image-extra-dev

Due to the size of the dbg-pkgs and dev-pkgs,
allscenarios-image-extra-dev needs a bump of it's ROOT_PARTITION_SIZE
else wic creation explodes.

Closes <issues 123>

Signed-off-by: Eilís Ní Fhlannagáin <elizabeth.flanagan@huawei.com>

The cache is relatively network-heavy, as it attempts to check if one of
myriad of cache files is available and is somewhat misleading, since the
cache only works for the small subset of configurations that have been
cleared for legal re-distribution and have a public cache available.

Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@huawei.com>

SystemOTA depends on RAUC. The meta-rauc repository was added to the
manifest earlier [1], and now needs to participate in the default build
configuration process.

[1] https://git.ostc-eu.org/OSTC/OHOS/manifest/-/merge_requests/127



Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@huawei.com>

Add meta-riscv to bblayers.conf.sample to enable RISC-V support
in all ASOS builds

Signed-off-by: Bernhard Rosenkränzer <bernhard.rosenkraenzer.ext@huawei.com>