Explicitly setting `DEPLOY_DIR_IMAGE` is not needed, since we have
`TEMPLATECONF`.
Setting `TEMPLATECONF` on the `source` step makes both `bitbake` and
`runqemu` steps share the same `DISTRO` setting, which sets
`DEPLOY_DIR_IMAGE` properly. Remove it from readme and conf-notes shown
after sourcing the env.

Signed-off-by: Wojciech Zmuda <wojciech.zmuda@huawei.com>

Since the default images have changed, switch to
the new ones recommended for OpenHarmony.

Signed-off-by: Zbigniew Bodek <zbigniew.bodek@huawei.com>

Remove redundant IMAGE_INSTALL_append from local.conf.sample.
openharmony-image-base and openharmony-image-extra images
will include those packages.

Signed-off-by: Zbigniew Bodek <zbigniew.bodek@huawei.com>

Add meta-ohos-core to the sample list of layers being
used in the project.
The layer contains:
* Core elements of the OpenHarmony distribution
* Reference images recipes

Signed-off-by: Zbigniew Bodek <zbigniew.bodek@huawei.com>

Add recipes for for base and extra (adding i.a. GUI) images.
Both are derived from their core-class counterparts (base and weston).
Each will append necessary package groups.

Signed-off-by: Zbigniew Bodek <zbigniew.bodek@huawei.com>

Introduce package group to gather connectivity related
(networking, bluetooth, etc.) applications and tools.

Signed-off-by: Zbigniew Bodek <zbigniew.bodek@huawei.com>

Add openharmony-linux base distribution configuration
as a superset of poky.
For now this distro only enables systemd as a default
init manager instead of sysvinit.

Signed-off-by: Zbigniew Bodek <zbigniew.bodek@huawei.com>

Add meta-ohos-core layer skeleton.
It is intended to be used to provide OpenHarmony
distributions and images.

Signed-off-by: Zbigniew Bodek <zbigniew.bodek@huawei.com>

Signed-off-by: Wojciech Zmuda <wojciech.zmuda@huawei.com>

Linux daemon to interact with a network co-processor compatible OT
firmware for Thread network access.

The project itself is in maintenance mode and only accepts fixes and no
new fatures. Consider OpenThread Daemon as replacement.

Closes: https://git.ostc-eu.org/OSTC/planning/core-os/-/issues/3



Signed-off-by: Stefan Schmidt <stefan.schmidt@huawei.com>

The OpenThread repo offers a huge amount of build targets (most of them
for MCUs directly), but for this recipe we only build the Linux native
service and ctl commandline.

This runs as a service on a Linux host and connects to a radio
co-processor for Thread network access.

Closes: https://git.ostc-eu.org/OSTC/planning/core-os/-/issues/35



Signed-off-by: Stefan Schmidt <stefan.schmidt@huawei.com>

While some changes could go upstream righ away, some others might need
more work until ready. This layer gives us a space to keep these recipes
and changes while we get them ready.

Signed-off-by: Stefan Schmidt <stefan.schmidt@huawei.com>

ohos-xtc-acts is the starting point the porting of OHOS Application
Compatibility Test Suite to Linux. Build a single initial test with make
instead of OHOS specific and unusable BUILD.gn file.

Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@huawei.com>

ohos-libsec is a fork of part of the OpenArk compiler implementing Annex K
extensions to C adapted for OHOS and LiteOS. Build with make instead of OHOS
specific and unusable BUILD.gn file.

Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@huawei.com>

MulanPSL-2.0 is an OSI Approved license:
https://opensource.org/licenses/MulanPSL-2.0



Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@huawei.com>

ohos-googoletest is a fork of googletest with OHOS-specific extensions. Build
with make instead of OHOS specific and unusable BUILD.gn file. Unlike the
BUILD.gn file, build shared libraries for gtest and gtest_main. The remaining
gmock library is not yet needed by any test so it is not built.

Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@huawei.com>

This bbclass inherits autotools, injects dependency on zmk-native
and creates the configure script in do_configure_prepend.

Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@huawei.com>

ZMK is an arch-independent library for make so it depends on make-native and
gawk-native. The recipe inherits autotools and works fine without any
overrides.

Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@huawei.com>

This layer will contain application test suite for Open Harmony.

Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@huawei.com>

Fix typo appned -> append to include networking packages as intended.
Add leading space to not break things being appended.

Signed-off-by: Zbigniew Bodek <zbigniew.bodek@huawei.com>

We want README pointing to the stable manifest to avoid any issues
with the build process especially for the first time users.

Closes: https://git.ostc-eu.org/OSTC/OHOS/meta-ohos/-/issues/8


Signed-off-by: Robert Drab <robert.drab@huawei.com>

Having core-image-minimal as a default first-on-the-list image
can be misleading when adding new boards to the build system
as this image allows only to boot-up minimal system without
any features that the board may support in terms of connectivity, etc.

core-image-full-cmdline, likewise, does not include "kernel-modules"
and can cause similar confusion.

Closes: https://git.ostc-eu.org/OSTC/OHOS/meta-ohos/-/issues/7


Signed-off-by: Robert Drab <robert.drab@huawei.com>

Signed-off-by: Robert Drab <robert.drab@huawei.com>

Add required meta-layers to bblayers.conf.sample.
Add dependencies to local.conf.sample that provide necessary
packages to enable Ethernet, WiFi and Bluetooth connectivity.
Mention the board in README.

Signed-off-by: Wojciech Zmuda <wojciech.zmuda@huawei.com>

Alberto Merciai authored 4 years ago and Ettore Chimenti committed 4 years ago

Co-authored-by: Ettore Chimenti <ettore.chimenti@seco.com>
Co-authored-by: Tommaso Merciai <tommaso.merciai@seco.com>
Co-authored-by: Alberto Merciai <alberto.merciai@seco.com>
Signed-off-by: Ettore Chimenti <ettore.chimenti@seco.com>

Move manifest repo to OHOS

See merge request OSTC/OHOS/meta-ohos!6

meta-ohos and manifest moved from OSTC to OSTC/OHOS subgroup

Signed-off-by: Robert Drab <robert.drab@huawei.com>

Add ohos build flavours

See merge request OSTC/OHOS/meta-ohos!5

OHOS build environment can be quickly set up using
TEMPLATECONF pointing to selected flavour, e.g.
linux, zephyr.

New build directory structure:
all meta layers are stored in the sources directory
alongside poky instead of inside poky

Signed-off-by: Robert Drab <robert.drab@huawei.com>

Copy of Poky sample files with default distro set
to freertos

meta-freertos and meta-ohos-foundation layers added
to bblayers.conf.sample

Signed-off-by: Robert Drab <robert.drab@huawei.com>

Copy of Poky sample files with default distro set
to zephyr and following meta-layer in bblayers.conf.sample:
- poky/meta
- meta-openembedded/meta-oe
- meta-openembedded/meta-python
- meta-zephyr
- meta-ohos/meta-ohos-foundation

Signed-off-by: Robert Drab <robert.drab@huawei.com>

Copy of Poky sample files with default distro set
to poky and meta-ohos-foundation layer added

Signed-off-by: Robert Drab <robert.drab@huawei.com>

Update URL to reflect new repository location

See merge request OSTC/meta-ohos!4

Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@huawei.com>

Rdrab meta ohos merge

See merge request OSTC/meta-ohos!3

Proposal of approaching environment setup for building
OHOS on various kernels.

Signed-off-by: Robert Drab <robert.drab@huawei.com>

Adding foundation exec to RPROVIDES

See merge request incubate/meta-ohos/meta-ohos!1

In order to include foundation executable by name
into final image it needs to be present in RPROVIDES

Signed-off-by: Robert Drab <robert.drab@huawei.com>

After switching to Dunfell (latest stable Poky version)
it needs to be included in compatible layers

Signed-off-by: Robert Drab <robert.drab@huawei.com>

Some Linux builds may have different TARGET_OS, such as
linux-musl or linux-gnueabi.
Fix matching all of those variants into one - "linux".

Signed-off-by: Zbigniew Bodek <zbigniew.bodek@huawei.com>