Documentation/admin-guide/devices.txt

@@ -2993,10 +2993,10 @@
 		65 = /dev/infiniband/issm1     Second InfiniBand IsSM device
 		  ...
 		127 = /dev/infiniband/issm63    63rd InfiniBand IsSM device
-		128 = /dev/infiniband/uverbs0   First InfiniBand verbs device
-		129 = /dev/infiniband/uverbs1   Second InfiniBand verbs device
+		192 = /dev/infiniband/uverbs0   First InfiniBand verbs device
+		193 = /dev/infiniband/uverbs1   Second InfiniBand verbs device
 		  ...
-		159 = /dev/infiniband/uverbs31  31st InfiniBand verbs device
+		223 = /dev/infiniband/uverbs31  31st InfiniBand verbs device
 
  232 char	Biometric Devices
 		0 = /dev/biometric/sensor0/fingerprint	first fingerprint sensor on first device

Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml

@@ -33,8 +33,11 @@ properties:
 
   backlight: true
 
+  spi-cpha: true
+
+  spi-cpol: true
+
   spi-max-frequency:
-    $ref: /schemas/types.yaml#/definitions/uint32
     description: inherited as a SPI client node, the datasheet specifies
       maximum 300 ns minimum cycle which gives around 3 MHz max frequency
     maximum: 3000000
@@ -44,6 +47,9 @@ properties:
 required:
   - compatible
   - reg
+  - spi-cpha
+  - spi-cpol
+  - port
 
 additionalProperties: false
 
@@ -52,15 +58,23 @@ examples:
     #include <dt-bindings/gpio/gpio.h>
 
     spi {
+      compatible = "spi-gpio";
+      sck-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+      miso-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+      mosi-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+      cs-gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
+      num-chipselects = <1>;
       #address-cells = <1>;
       #size-cells = <0>;
       panel@0 {
         compatible = "samsung,lms397kf04";
         spi-max-frequency = <3000000>;
+        spi-cpha;
+        spi-cpol;
         reg = <0>;
         vci-supply = <&lcd_3v0_reg>;
         vccio-supply = <&lcd_1v8_reg>;
-        reset-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+        reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
         backlight = <&ktd259>;
 
         port {

Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt

@@ -43,19 +43,19 @@ group emmc_nb
 
 group pwm0
  - pin 11 (GPIO1-11)
- - functions pwm, gpio
+ - functions pwm, led, gpio
 
 group pwm1
  - pin 12
- - functions pwm, gpio
+ - functions pwm, led, gpio
 
 group pwm2
  - pin 13
- - functions pwm, gpio
+ - functions pwm, led, gpio
 
 group pwm3
  - pin 14
- - functions pwm, gpio
+ - functions pwm, led, gpio
 
 group pmic1
  - pin 7

Documentation/fault-injection/provoke-crashes.rst

@@ -29,7 +29,7 @@ recur_count
 cpoint_name
 	Where in the kernel to trigger the action. It can be
 	one of INT_HARDWARE_ENTRY, INT_HW_IRQ_EN, INT_TASKLET_ENTRY,
-	FS_DEVRW, MEM_SWAPOUT, TIMERADD, SCSI_DISPATCH_CMD,
+	FS_DEVRW, MEM_SWAPOUT, TIMERADD, SCSI_QUEUE_RQ,
 	IDE_CORE_CP, or DIRECT
 
 cpoint_type

Documentation/filesystems/f2fs.rst

@@ -185,6 +185,7 @@ fault_type=%d		 Support configuring fault injection type, should be
 			 FAULT_KVMALLOC		  0x000000002
 			 FAULT_PAGE_ALLOC	  0x000000004
 			 FAULT_PAGE_GET		  0x000000008
+			 FAULT_ALLOC_BIO	  0x000000010 (obsolete)
 			 FAULT_ALLOC_NID	  0x000000020
 			 FAULT_ORPHAN		  0x000000040
 			 FAULT_BLOCK		  0x000000080

Makefile

 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 14
-SUBLEVEL = 0
+SUBLEVEL = 6
 EXTRAVERSION =
 NAME = Opossums on Parade
 
@@ -404,6 +404,11 @@ ifeq ($(ARCH),sparc64)
        SRCARCH := sparc
 endif
 
+# Additional ARCH settings for parisc
+ifeq ($(ARCH),parisc64)
+       SRCARCH := parisc
+endif
+
 export cross_compiling :=
 ifneq ($(SRCARCH),$(SUBARCH))
 cross_compiling := 1
@@ -803,6 +808,8 @@ else
 # Disabled for clang while comment to attribute conversion happens and
 # https://github.com/ClangBuiltLinux/linux/issues/636 is discussed.
 KBUILD_CFLAGS += $(call cc-option,-Wimplicit-fallthrough=5,)
+# gcc inanely warns about local variables called 'main'
+KBUILD_CFLAGS += -Wno-main
 endif
 
 # These warnings generated too much noise in a regular build.

arch/arm/boot/compressed/Makefile

@@ -85,6 +85,8 @@ compress-$(CONFIG_KERNEL_LZ4)  = lz4
 libfdt_objs := fdt_rw.o fdt_ro.o fdt_wip.o fdt.o
 
 ifeq ($(CONFIG_ARM_ATAG_DTB_COMPAT),y)
+CFLAGS_REMOVE_atags_to_fdt.o += -Wframe-larger-than=${CONFIG_FRAME_WARN}
+CFLAGS_atags_to_fdt.o += -Wframe-larger-than=1280
 OBJS	+= $(libfdt_objs) atags_to_fdt.o
 endif
 ifeq ($(CONFIG_USE_OF),y)

arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts

@@ -2832,7 +2832,7 @@ &pinctrl_emmc_default {
 
 &emmc {
 	status = "okay";
-	clk-phase-mmc-hs200 = <180>, <180>;
+	clk-phase-mmc-hs200 = <210>, <228>;
 };
 
 &fsim0 {

arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi

@@ -208,12 +208,12 @@ pinctrl_gpiu7_default: gpiu7_default {
 	};
 
 	pinctrl_hvi3c3_default: hvi3c3_default {
-		function = "HVI3C3";
+		function = "I3C3";
 		groups = "HVI3C3";
 	};
 
 	pinctrl_hvi3c4_default: hvi3c4_default {
-		function = "HVI3C4";
+		function = "I3C4";
 		groups = "HVI3C4";
 	};
 

arch/arm/boot/dts/at91-kizbox3_common.dtsi

@@ -336,7 +336,7 @@ &pwm0 {
 };
 
 &shutdown_controller {
-	atmel,shdwc-debouncer = <976>;
+	debounce-delay-us = <976>;
 	atmel,wakeup-rtc-timer;
 
 	input@0 {

arch/arm/boot/dts/at91-sam9x60ek.dts

@@ -92,6 +92,8 @@ sw1 {
 
 	leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
 		status = "okay"; /* Conflict with pwm0. */
 
 		red {
@@ -537,6 +539,10 @@ AT91_PIOA 18 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_H
 				 AT91_PIOA 19 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA19 DAT2 periph A with pullup */
 				 AT91_PIOA 20 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>;	/* PA20 DAT3 periph A with pullup */
 		};
+		pinctrl_sdmmc0_cd: sdmmc0_cd {
+			atmel,pins =
+				<AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
 	};
 
 	sdmmc1 {
@@ -569,6 +575,14 @@ pinctrl_usb_default: usb_default {
 				      AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
 		};
 	};
+
+	leds {
+		pinctrl_gpio_leds: gpio_leds {
+			atmel,pins = <AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOB 12 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOB 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
 }; /* pinctrl */
 
 &pwm0 {
@@ -580,7 +594,7 @@ &pwm0 {
 &sdmmc0 {
 	bus-width = <4>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sdmmc0_default>;
+	pinctrl-0 = <&pinctrl_sdmmc0_default &pinctrl_sdmmc0_cd>;
 	status = "okay";
 	cd-gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
 	disable-wp;
@@ -648,7 +662,7 @@ &rtt {
 };
 
 &shutdown_controller {
-	atmel,shdwc-debouncer = <976>;
+	debounce-delay-us = <976>;
 	status = "okay";
 
 	input@0 {

arch/arm/boot/dts/at91-sama5d27_som1_ek.dts

@@ -138,7 +138,7 @@ i2c3: i2c@600 {
 			};
 
 			shdwc@f8048010 {
-				atmel,shdwc-debouncer = <976>;
+				debounce-delay-us = <976>;
 				atmel,wakeup-rtc-timer;
 
 				input@0 {

arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts

@@ -205,7 +205,7 @@ &sdmmc0 {
 };
 
 &shutdown_controller {
-	atmel,shdwc-debouncer = <976>;
+	debounce-delay-us = <976>;
 	atmel,wakeup-rtc-timer;
 
 	input@0 {

arch/arm/boot/dts/at91-sama5d2_icp.dts

@@ -693,7 +693,7 @@ &sdmmc0 {
 };
 
 &shutdown_controller {
-	atmel,shdwc-debouncer = <976>;
+	debounce-delay-us = <976>;
 	atmel,wakeup-rtc-timer;
 
 	input@0 {

arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts

@@ -203,7 +203,7 @@ i2c2: i2c@600 {
 			};
 
 			shdwc@f8048010 {
-				atmel,shdwc-debouncer = <976>;
+				debounce-delay-us = <976>;
 
 				input@0 {
 					reg = <0>;

arch/arm/boot/dts/at91-sama5d2_xplained.dts

@@ -347,7 +347,7 @@ i2c2: i2c@600 {
 			};
 
 			shdwc@f8048010 {
-				atmel,shdwc-debouncer = <976>;
+				debounce-delay-us = <976>;
 				atmel,wakeup-rtc-timer;
 
 				input@0 {

arch/arm/boot/dts/at91-sama5d3_xplained.dts

@@ -57,6 +57,8 @@ slot@0 {
 			};
 
 			spi0: spi@f0004000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0_cs>;
 				cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
 				status = "okay";
 			};
@@ -169,6 +171,8 @@ slot@0 {
 			};
 
 			spi1: spi@f8008000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1_cs>;
 				cs-gpios = <&pioC 25 0>;
 				status = "okay";
 			};
@@ -248,6 +252,26 @@ pinctrl_usb_default: usb_default {
 							<AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
 							 AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
 					};
+
+					pinctrl_gpio_leds: gpio_leds_default {
+						atmel,pins =
+							<AT91_PIOE 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_spi0_cs: spi0_cs_default {
+						atmel,pins =
+							<AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_spi1_cs: spi1_cs_default {
+						atmel,pins = <AT91_PIOC 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_vcc_mmc0_reg_gpio: vcc_mmc0_reg_gpio_default {
+						atmel,pins = <AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
 				};
 			};
 		};
@@ -339,6 +363,8 @@ rootfs@800000 {
 
 	vcc_mmc0_reg: fixedregulator_mmc0 {
 		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vcc_mmc0_reg_gpio>;
 		gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
 		regulator-name = "mmc0-card-supply";
 		regulator-min-microvolt = <3300000>;
@@ -362,6 +388,9 @@ bp3 {
 
 	leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+		status = "okay";
 
 		d2 {
 			label = "d2";

arch/arm/boot/dts/at91-sama5d4_xplained.dts

@@ -90,6 +90,8 @@ usart4: serial@fc010000 {
 			};
 
 			spi1: spi@fc018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0_cs>;
 				cs-gpios = <&pioB 21 0>;
 				status = "okay";
 			};
@@ -147,6 +149,19 @@ pinctrl_macb0_phy_irq: macb0_phy_irq_0 {
 						atmel,pins =
 							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
 					};
+					pinctrl_spi0_cs: spi0_cs_default {
+						atmel,pins =
+							<AT91_PIOB 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_gpio_leds: gpio_leds_default {
+						atmel,pins =
+							<AT91_PIOD 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOE 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_vcc_mmc1_reg: vcc_mmc1_reg {
+						atmel,pins =
+							<AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
 				};
 			};
 		};
@@ -252,6 +267,8 @@ pb_user1 {
 
 	leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
 		status = "okay";
 
 		d8 {
@@ -278,6 +295,8 @@ vcc_3v3_reg: fixedregulator_3v3 {
 
 	vcc_mmc1_reg: fixedregulator_mmc1 {
 		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vcc_mmc1_reg>;
 		gpio = <&pioE 4 GPIO_ACTIVE_LOW>;
 		regulator-name = "VDD MCI1";
 		regulator-min-microvolt = <3300000>;

arch/arm/boot/dts/imx53-ppd.dts

@@ -70,6 +70,12 @@ cko2_11M: sgtl-clock-cko2 {
 		clock-frequency = <11289600>;
 	};
 
+	achc_24M: achc-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
 	sgtlsound: sound {
 		compatible = "fsl,imx53-cpuvo-sgtl5000",
 			     "fsl,imx-audio-sgtl5000";
@@ -314,16 +320,13 @@ &gpio4 11 GPIO_ACTIVE_LOW
 		    &gpio4 12 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
-	spidev0: spi@0 {
-		compatible = "ge,achc";
-		reg = <0>;
-		spi-max-frequency = <1000000>;
-	};
-
-	spidev1: spi@1 {
-		compatible = "ge,achc";
-		reg = <1>;
-		spi-max-frequency = <1000000>;
+	spidev0: spi@1 {
+		compatible = "ge,achc", "nxp,kinetis-k20";
+		reg = <1>, <0>;
+		vdd-supply = <&reg_3v3>;
+		vdda-supply = <&reg_3v3>;
+		clocks = <&achc_24M>;
+		reset-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
 	};
 
 	gpioxra0: gpio@2 {

arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts

@@ -124,20 +124,20 @@ pci@c0000000 {
 			 */
 			interrupt-map =
 			/* IDSEL 1 */
-			<0x0800 0 0 1 &gpio0 11 3>, /* INT A on slot 1 is irq 11 */
-			<0x0800 0 0 2 &gpio0 10 3>, /* INT B on slot 1 is irq 10 */
-			<0x0800 0 0 3 &gpio0 9  3>, /* INT C on slot 1 is irq 9 */
-			<0x0800 0 0 4 &gpio0 8  3>, /* INT D on slot 1 is irq 8 */
+			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
+			<0x0800 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 10 */
+			<0x0800 0 0 3 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 9 */
+			<0x0800 0 0 4 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 8 */
 			/* IDSEL 2 */
-			<0x1000 0 0 1 &gpio0 10 3>, /* INT A on slot 2 is irq 10 */
-			<0x1000 0 0 2 &gpio0 9  3>, /* INT B on slot 2 is irq 9 */
-			<0x1000 0 0 3 &gpio0 11 3>, /* INT C on slot 2 is irq 11 */
-			<0x1000 0 0 4 &gpio0 8  3>, /* INT D on slot 2 is irq 8 */
+			<0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
+			<0x1000 0 0 2 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 9 */
+			<0x1000 0 0 3 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 11 */
+			<0x1000 0 0 4 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 2 is irq 8 */
 			/* IDSEL 3 */
-			<0x1800 0 0 1 &gpio0 9  3>, /* INT A on slot 3 is irq 9 */
-			<0x1800 0 0 2 &gpio0 11 3>, /* INT B on slot 3 is irq 11 */
-			<0x1800 0 0 3 &gpio0 10 3>, /* INT C on slot 3 is irq 10 */
-			<0x1800 0 0 4 &gpio0 8  3>; /* INT D on slot 3 is irq 8 */
+			<0x1800 0 0 1 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 9 */
+			<0x1800 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 11 */
+			<0x1800 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 10 */
+			<0x1800 0 0 4 &gpio0 8  IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 3 is irq 8 */
 		};
 
 		ethernet@c8009000 {