V4L/DVB (7019): V4L: add support for Syntek DC1125 webcams

This driver supports cameras with USB ID 174f:a311 or 05e1:0501,
and the ov965x sensors. These devices are found in some Asus laptops
and probably somewhere else.

It is based on the stk11xx driver written by Nicolas Vivien

Signed-off-by: Jaime Velasco Juan <jsagarribay@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

drivers/media/video/Kconfig

@@ -821,6 +821,19 @@ config USB_ZR364XX
 	  To compile this driver as a module, choose M here: the
 	  module will be called zr364xx.
 
+config USB_STKWEBCAM
+	tristate "USB Syntek DC1125 Camera support"
+	depends on VIDEO_V4L2 && EXPERIMENTAL
+	---help---
+	  Say Y here if you want to use this type of camera.
+	  Supported devices are typically found in some Asus laptops,
+	  with USB id 174f:a311 and 05e1:0501. Other Syntek cameras
+	  may be supported by the stk11xx driver, from which this is
+	  derived, see http://stk11xx.sourceforge.net
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called stkwebcam.
+
 endif # V4L_USB_DRIVERS
 
 endif # VIDEO_CAPTURE_DRIVERS

drivers/media/video/Makefile

@@ -8,6 +8,8 @@ tuner-objs	:=	tuner-core.o tuner-types.o
 
 msp3400-objs	:=	msp3400-driver.o msp3400-kthreads.o
 
+stkwebcam-objs	:=	stk-webcam.o stk-sensor.o
+
 obj-$(CONFIG_VIDEO_DEV) += videodev.o v4l2-common.o compat_ioctl32.o \
 			   v4l2-int-device.o
 
@@ -116,6 +118,7 @@ obj-$(CONFIG_USB_SE401)         += se401.o
 obj-$(CONFIG_USB_STV680)        += stv680.o
 obj-$(CONFIG_USB_W9968CF)       += w9968cf.o
 obj-$(CONFIG_USB_ZR364XX)       += zr364xx.o
+obj-$(CONFIG_USB_STKWEBCAM)     += stkwebcam.o
 
 obj-$(CONFIG_USB_SN9C102)       += sn9c102/
 obj-$(CONFIG_USB_ET61X251)      += et61x251/

drivers/media/video/stk-sensor.c

+/* stk-sensor.c: Driver for ov96xx sensor (used in some Syntek webcams)
+ *
+ * Copyright 2007-2008 Jaime Velasco Juan <jsagarribay@gmail.com>
+ *
+ * Some parts derived from ov7670.c:
+ * Copyright 2006 One Laptop Per Child Association, Inc.  Written
+ * by Jonathan Corbet with substantial inspiration from Mark
+ * McClelland's ovcamchip code.
+ *
+ * Copyright 2006-7 Jonathan Corbet <corbet@lwn.net>
+ *
+ * This file may be distributed under the terms of the GNU General
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Controlling the sensor via the STK1125 vendor specific control interface:
+ * The camera uses an OmniVision sensor and the stk1125 provides an
+ * SCCB(i2c)-USB bridge which let us program the sensor.
+ * In my case the sensor id is 0x9652, it can be read from sensor's register
+ * 0x0A and 0x0B as follows:
+ * - read register #R:
+ *   output #R to index 0x0208
+ *   output 0x0070 to index 0x0200
+ *   input 1 byte from index 0x0201 (some kind of status register)
+ *     until its value is 0x01
+ *   input 1 byte from index 0x0209. This is the value of #R
+ * - write value V to register #R
+ *   output #R to index 0x0204
+ *   output V to index 0x0205
+ *   output 0x0005 to index 0x0200
+ *   input 1 byte from index 0x0201 until its value becomes 0x04
+ */
+
+/* It seems the i2c bus is controlled with these registers */
+
+#include "stk-webcam.h"
+
+#define STK_IIC_BASE		(0x0200)
+#  define STK_IIC_OP		(STK_IIC_BASE)
+#    define STK_IIC_OP_TX	(0x05)
+#    define STK_IIC_OP_RX	(0x70)
+#  define STK_IIC_STAT		(STK_IIC_BASE+1)
+#    define STK_IIC_STAT_TX_OK	(0x04)
+#    define STK_IIC_STAT_RX_OK	(0x01)
+/* I don't know what does this register.
+ * when it is 0x00 or 0x01, we cannot talk to the sensor,
+ * other values work */
+#  define STK_IIC_ENABLE	(STK_IIC_BASE+2)
+#    define STK_IIC_ENABLE_NO	(0x00)
+/* This is what the driver writes in windows */
+#    define STK_IIC_ENABLE_YES	(0x1e)
+/*
+ * Address of the slave. Seems like the binary driver look for the
+ * sensor in multiple places, attempting a reset sequence.
+ * We only know about the ov9650
+ */
+#  define STK_IIC_ADDR		(STK_IIC_BASE+3)
+#  define STK_IIC_TX_INDEX	(STK_IIC_BASE+4)
+#  define STK_IIC_TX_VALUE	(STK_IIC_BASE+5)
+#  define STK_IIC_RX_INDEX	(STK_IIC_BASE+8)
+#  define STK_IIC_RX_VALUE	(STK_IIC_BASE+9)
+
+#define MAX_RETRIES		(50)
+
+#define SENSOR_ADDRESS		(0x60)
+
+/* From ov7670.c (These registers aren't fully accurate) */
+
+/* Registers */
+#define REG_GAIN	0x00	/* Gain lower 8 bits (rest in vref) */
+#define REG_BLUE	0x01	/* blue gain */
+#define REG_RED		0x02	/* red gain */
+#define REG_VREF	0x03	/* Pieces of GAIN, VSTART, VSTOP */
+#define REG_COM1	0x04	/* Control 1 */
+#define  COM1_CCIR656	  0x40  /* CCIR656 enable */
+#define  COM1_QFMT	  0x20  /* QVGA/QCIF format */
+#define  COM1_SKIP_0	  0x00  /* Do not skip any row */
+#define  COM1_SKIP_2	  0x04  /* Skip 2 rows of 4 */
+#define  COM1_SKIP_3	  0x08  /* Skip 3 rows of 4 */
+#define REG_BAVE	0x05	/* U/B Average level */
+#define REG_GbAVE	0x06	/* Y/Gb Average level */
+#define REG_AECHH	0x07	/* AEC MS 5 bits */
+#define REG_RAVE	0x08	/* V/R Average level */
+#define REG_COM2	0x09	/* Control 2 */
+#define  COM2_SSLEEP	  0x10	/* Soft sleep mode */
+#define REG_PID		0x0a	/* Product ID MSB */
+#define REG_VER		0x0b	/* Product ID LSB */
+#define REG_COM3	0x0c	/* Control 3 */
+#define  COM3_SWAP	  0x40	  /* Byte swap */
+#define  COM3_SCALEEN	  0x08	  /* Enable scaling */
+#define  COM3_DCWEN	  0x04	  /* Enable downsamp/crop/window */
+#define REG_COM4	0x0d	/* Control 4 */
+#define REG_COM5	0x0e	/* All "reserved" */
+#define REG_COM6	0x0f	/* Control 6 */
+#define REG_AECH	0x10	/* More bits of AEC value */
+#define REG_CLKRC	0x11	/* Clock control */
+#define   CLK_PLL	  0x80	  /* Enable internal PLL */
+#define   CLK_EXT	  0x40	  /* Use external clock directly */
+#define   CLK_SCALE	  0x3f	  /* Mask for internal clock scale */
+#define REG_COM7	0x12	/* Control 7 */
+#define   COM7_RESET	  0x80	  /* Register reset */
+#define   COM7_FMT_MASK	  0x38
+#define   COM7_FMT_SXGA	  0x00
+#define   COM7_FMT_VGA	  0x40
+#define	  COM7_FMT_CIF	  0x20	  /* CIF format */
+#define   COM7_FMT_QVGA	  0x10	  /* QVGA format */
+#define   COM7_FMT_QCIF	  0x08	  /* QCIF format */
+#define	  COM7_RGB	  0x04	  /* bits 0 and 2 - RGB format */
+#define	  COM7_YUV	  0x00	  /* YUV */
+#define	  COM7_BAYER	  0x01	  /* Bayer format */
+#define	  COM7_PBAYER	  0x05	  /* "Processed bayer" */
+#define REG_COM8	0x13	/* Control 8 */
+#define   COM8_FASTAEC	  0x80	  /* Enable fast AGC/AEC */
+#define   COM8_AECSTEP	  0x40	  /* Unlimited AEC step size */
+#define   COM8_BFILT	  0x20	  /* Band filter enable */
+#define   COM8_AGC	  0x04	  /* Auto gain enable */
+#define   COM8_AWB	  0x02	  /* White balance enable */
+#define   COM8_AEC	  0x01	  /* Auto exposure enable */
+#define REG_COM9	0x14	/* Control 9  - gain ceiling */
+#define REG_COM10	0x15	/* Control 10 */
+#define   COM10_HSYNC	  0x40	  /* HSYNC instead of HREF */
+#define   COM10_PCLK_HB	  0x20	  /* Suppress PCLK on horiz blank */
+#define   COM10_HREF_REV  0x08	  /* Reverse HREF */
+#define   COM10_VS_LEAD	  0x04	  /* VSYNC on clock leading edge */
+#define   COM10_VS_NEG	  0x02	  /* VSYNC negative */
+#define   COM10_HS_NEG	  0x01	  /* HSYNC negative */
+#define REG_HSTART	0x17	/* Horiz start high bits */
+#define REG_HSTOP	0x18	/* Horiz stop high bits */
+#define REG_VSTART	0x19	/* Vert start high bits */
+#define REG_VSTOP	0x1a	/* Vert stop high bits */
+#define REG_PSHFT	0x1b	/* Pixel delay after HREF */
+#define REG_MIDH	0x1c	/* Manuf. ID high */
+#define REG_MIDL	0x1d	/* Manuf. ID low */
+#define REG_MVFP	0x1e	/* Mirror / vflip */
+#define   MVFP_MIRROR	  0x20	  /* Mirror image */
+#define   MVFP_FLIP	  0x10	  /* Vertical flip */
+
+#define REG_AEW		0x24	/* AGC upper limit */
+#define REG_AEB		0x25	/* AGC lower limit */
+#define REG_VPT		0x26	/* AGC/AEC fast mode op region */
+#define REG_ADVFL	0x2d	/* Insert dummy lines (LSB) */
+#define REG_ADVFH	0x2e	/* Insert dummy lines (MSB) */
+#define REG_HSYST	0x30	/* HSYNC rising edge delay */
+#define REG_HSYEN	0x31	/* HSYNC falling edge delay */
+#define REG_HREF	0x32	/* HREF pieces */
+#define REG_TSLB	0x3a	/* lots of stuff */
+#define   TSLB_YLAST	  0x04	  /* UYVY or VYUY - see com13 */
+#define   TSLB_BYTEORD	  0x08	  /* swap bytes in 16bit mode? */
+#define REG_COM11	0x3b	/* Control 11 */
+#define   COM11_NIGHT	  0x80	  /* NIght mode enable */
+#define   COM11_NMFR	  0x60	  /* Two bit NM frame rate */
+#define   COM11_HZAUTO	  0x10	  /* Auto detect 50/60 Hz */
+#define	  COM11_50HZ	  0x08	  /* Manual 50Hz select */
+#define   COM11_EXP	  0x02
+#define REG_COM12	0x3c	/* Control 12 */
+#define   COM12_HREF	  0x80	  /* HREF always */
+#define REG_COM13	0x3d	/* Control 13 */
+#define   COM13_GAMMA	  0x80	  /* Gamma enable */
+#define	  COM13_UVSAT	  0x40	  /* UV saturation auto adjustment */
+#define	  COM13_CMATRIX	  0x10	  /* Enable color matrix for RGB or YUV */
+#define   COM13_UVSWAP	  0x01	  /* V before U - w/TSLB */
+#define REG_COM14	0x3e	/* Control 14 */
+#define   COM14_DCWEN	  0x10	  /* DCW/PCLK-scale enable */
+#define REG_EDGE	0x3f	/* Edge enhancement factor */
+#define REG_COM15	0x40	/* Control 15 */
+#define   COM15_R10F0	  0x00	  /* Data range 10 to F0 */
+#define	  COM15_R01FE	  0x80	  /*            01 to FE */
+#define   COM15_R00FF	  0xc0	  /*            00 to FF */
+#define   COM15_RGB565	  0x10	  /* RGB565 output */
+#define   COM15_RGBFIXME	  0x20	  /* FIXME  */
+#define   COM15_RGB555	  0x30	  /* RGB555 output */
+#define REG_COM16	0x41	/* Control 16 */
+#define   COM16_AWBGAIN   0x08	  /* AWB gain enable */
+#define REG_COM17	0x42	/* Control 17 */
+#define   COM17_AECWIN	  0xc0	  /* AEC window - must match COM4 */
+#define   COM17_CBAR	  0x08	  /* DSP Color bar */
+
+/*
+ * This matrix defines how the colors are generated, must be
+ * tweaked to adjust hue and saturation.
+ *
+ * Order: v-red, v-green, v-blue, u-red, u-green, u-blue
+ *
+ * They are nine-bit signed quantities, with the sign bit
+ * stored in 0x58.  Sign for v-red is bit 0, and up from there.
+ */
+#define	REG_CMATRIX_BASE 0x4f
+#define   CMATRIX_LEN 6
+#define REG_CMATRIX_SIGN 0x58
+
+
+#define REG_BRIGHT	0x55	/* Brightness */
+#define REG_CONTRAS	0x56	/* Contrast control */
+
+#define REG_GFIX	0x69	/* Fix gain control */
+
+#define REG_RGB444	0x8c	/* RGB 444 control */
+#define   R444_ENABLE	  0x02	  /* Turn on RGB444, overrides 5x5 */
+#define   R444_RGBX	  0x01	  /* Empty nibble at end */
+
+#define REG_HAECC1	0x9f	/* Hist AEC/AGC control 1 */
+#define REG_HAECC2	0xa0	/* Hist AEC/AGC control 2 */
+
+#define REG_BD50MAX	0xa5	/* 50hz banding step limit */
+#define REG_HAECC3	0xa6	/* Hist AEC/AGC control 3 */
+#define REG_HAECC4	0xa7	/* Hist AEC/AGC control 4 */
+#define REG_HAECC5	0xa8	/* Hist AEC/AGC control 5 */
+#define REG_HAECC6	0xa9	/* Hist AEC/AGC control 6 */
+#define REG_HAECC7	0xaa	/* Hist AEC/AGC control 7 */
+#define REG_BD60MAX	0xab	/* 60hz banding step limit */
+
+
+
+
+/* Returns 0 if OK */
+int stk_sensor_outb(struct stk_camera *dev, u8 reg, u8 val)
+{
+	int i = 0;
+	int tmpval = 0;
+
+	if (stk_camera_write_reg(dev, STK_IIC_TX_INDEX, reg))
+		return 1;
+	if (stk_camera_write_reg(dev, STK_IIC_TX_VALUE, val))
+		return 1;
+	if (stk_camera_write_reg(dev, STK_IIC_OP, STK_IIC_OP_TX))
+		return 1;
+	do {
+		if (stk_camera_read_reg(dev, STK_IIC_STAT, &tmpval))
+			return 1;
+		i++;
+	} while (tmpval == 0 && i < MAX_RETRIES);
+	if (tmpval != STK_IIC_STAT_TX_OK) {
+		if (tmpval)
+			STK_ERROR("stk_sensor_outb failed, status=0x%02x\n",
+				tmpval);
+		return 1;
+	} else
+		return 0;
+}
+
+int stk_sensor_inb(struct stk_camera *dev, u8 reg, u8 *val)
+{
+	int i = 0;
+	int tmpval = 0;
+
+	if (stk_camera_write_reg(dev, STK_IIC_RX_INDEX, reg))
+		return 1;
+	if (stk_camera_write_reg(dev, STK_IIC_OP, STK_IIC_OP_RX))
+		return 1;
+	do {
+		if (stk_camera_read_reg(dev, STK_IIC_STAT, &tmpval))
+			return 1;
+		i++;
+	} while (tmpval == 0 && i < MAX_RETRIES);
+	if (tmpval != STK_IIC_STAT_RX_OK) {
+		if (tmpval)
+			STK_ERROR("stk_sensor_inb failed, status=0x%02x\n",
+				tmpval);
+		return 1;
+	}
+
+	if (stk_camera_read_reg(dev, STK_IIC_RX_VALUE, &tmpval))
+		return 1;
+
+	*val = (u8) tmpval;
+	return 0;
+}
+
+static int stk_sensor_write_regvals(struct stk_camera *dev,
+		struct regval *rv)
+{
+	int ret;
+	if (rv == NULL)
+		return 0;
+	while (rv->reg != 0xff || rv->val != 0xff) {
+		ret = stk_sensor_outb(dev, rv->reg, rv->val);
+		if (ret != 0)
+			return ret;
+		rv++;
+	}
+	return 0;
+}
+
+int stk_sensor_sleep(struct stk_camera *dev)
+{
+	u8 tmp;
+	return stk_sensor_inb(dev, REG_COM2, &tmp)
+		|| stk_sensor_outb(dev, REG_COM2, tmp|COM2_SSLEEP);
+}
+
+int stk_sensor_wakeup(struct stk_camera *dev)
+{
+	u8 tmp;
+	return stk_sensor_inb(dev, REG_COM2, &tmp)
+		|| stk_sensor_outb(dev, REG_COM2, tmp&~COM2_SSLEEP);
+}
+
+static struct regval ov_initvals[] = {
+	{REG_CLKRC, CLK_PLL},
+	{REG_COM11, 0x01},
+	{0x6a, 0x7d},
+	{REG_AECH, 0x40},
+	{REG_GAIN, 0x00},
+	{REG_BLUE, 0x80},
+	{REG_RED, 0x80},
+	/* Do not enable fast AEC for now */
+	/*{REG_COM8, COM8_FASTAEC|COM8_AECSTEP|COM8_BFILT|COM8_AGC|COM8_AEC},*/
+	{REG_COM8, COM8_AECSTEP|COM8_BFILT|COM8_AGC|COM8_AEC},
+	{0x39, 0x50}, {0x38, 0x93},
+	{0x37, 0x00}, {0x35, 0x81},
+	{REG_COM5, 0x20},
+	{REG_COM1, 0x00},
+	{REG_COM3, 0x00},
+	{REG_COM4, 0x00},
+	{REG_PSHFT, 0x00},
+	{0x16, 0x07},
+	{0x33, 0xe2}, {0x34, 0xbf},
+	{REG_COM16, 0x00},
+	{0x96, 0x04},
+	/* Gamma curve values */
+/*	{ 0x7a, 0x20 },		{ 0x7b, 0x10 },
+	{ 0x7c, 0x1e },		{ 0x7d, 0x35 },
+	{ 0x7e, 0x5a },		{ 0x7f, 0x69 },
+	{ 0x80, 0x76 },		{ 0x81, 0x80 },
+	{ 0x82, 0x88 },		{ 0x83, 0x8f },
+	{ 0x84, 0x96 },		{ 0x85, 0xa3 },
+	{ 0x86, 0xaf },		{ 0x87, 0xc4 },
+	{ 0x88, 0xd7 },		{ 0x89, 0xe8 },
+*/
+	{REG_GFIX, 0x40},
+	{0x8e, 0x00},
+	{REG_COM12, 0x73},
+	{0x8f, 0xdf}, {0x8b, 0x06},
+	{0x8c, 0x20},
+	{0x94, 0x88}, {0x95, 0x88},
+/*	{REG_COM15, 0xc1}, TODO */
+	{0x29, 0x3f},
+	{REG_COM6, 0x42},
+	{REG_BD50MAX, 0x80},
+	{REG_HAECC6, 0xb8}, {REG_HAECC7, 0x92},
+	{REG_BD60MAX, 0x0a},
+	{0x90, 0x00}, {0x91, 0x00},
+	{REG_HAECC1, 0x00}, {REG_HAECC2, 0x00},
+	{REG_AEW, 0x68}, {REG_AEB, 0x5c},
+	{REG_VPT, 0xc3},
+	{REG_COM9, 0x2e},
+	{0x2a, 0x00}, {0x2b, 0x00},
+
+	{0xff, 0xff}, /* END MARKER */
+};
+
+/* Probe the I2C bus and initialise the sensor chip */
+int stk_sensor_init(struct stk_camera *dev)
+{
+	u8 idl = 0;
+	u8 idh = 0;
+
+	if (stk_camera_write_reg(dev, STK_IIC_ENABLE, STK_IIC_ENABLE_YES)
+		|| stk_camera_write_reg(dev, STK_IIC_ADDR, SENSOR_ADDRESS)
+		|| stk_sensor_outb(dev, REG_COM7, COM7_RESET)) {
+		STK_ERROR("Sensor resetting failed\n");
+		return -ENODEV;
+	}
+	msleep(10);
+	/* Read the manufacturer ID: ov = 0x7FA2 */
+	if (stk_sensor_inb(dev, REG_MIDH, &idh)
+	    || stk_sensor_inb(dev, REG_MIDL, &idl)) {
+		STK_ERROR("Strange error reading sensor ID\n");
+		return -ENODEV;
+	}
+	if (idh != 0x7F || idl != 0xA2) {
+		STK_ERROR("Huh? you don't have a sensor from ovt\n");
+		return -ENODEV;
+	}
+	if (stk_sensor_inb(dev, REG_PID, &idh)
+	    || stk_sensor_inb(dev, REG_VER, &idl)) {
+		STK_ERROR("Could not read sensor model\n");
+		return -ENODEV;
+	}
+	stk_sensor_write_regvals(dev, ov_initvals);
+	msleep(10);
+	STK_INFO("OmniVision sensor detected, id %02X%02X"
+		" at address %x\n", idh, idl, SENSOR_ADDRESS);
+	return 0;
+}
+
+/* V4L2_PIX_FMT_UYVY */
+static struct regval ov_fmt_uyvy[] = {
+	{REG_TSLB, TSLB_YLAST|0x08 },
+	{ 0x4f, 0x80 }, 	/* "matrix coefficient 1" */
+	{ 0x50, 0x80 }, 	/* "matrix coefficient 2" */
+	{ 0x51, 0    },		/* vb */
+	{ 0x52, 0x22 }, 	/* "matrix coefficient 4" */
+	{ 0x53, 0x5e }, 	/* "matrix coefficient 5" */
+	{ 0x54, 0x80 }, 	/* "matrix coefficient 6" */
+	{REG_COM13, COM13_UVSAT|COM13_CMATRIX},
+	{REG_COM15, COM15_R00FF },
+	{0xff, 0xff}, /* END MARKER */
+};
+
+/* V4L2_PIX_FMT_RGB565X rrrrrggg gggbbbbb */
+static struct regval ov_fmt_rgbr[] = {
+	{ REG_RGB444, 0 },	/* No RGB444 please */
+	{REG_TSLB, 0x00},
+	{ REG_COM1, 0x0 },
+	{ REG_COM9, 0x38 }, 	/* 16x gain ceiling; 0x8 is reserved bit */
+	{ 0x4f, 0xb3 }, 	/* "matrix coefficient 1" */
+	{ 0x50, 0xb3 }, 	/* "matrix coefficient 2" */
+	{ 0x51, 0    },		/* vb */
+	{ 0x52, 0x3d }, 	/* "matrix coefficient 4" */
+	{ 0x53, 0xa7 }, 	/* "matrix coefficient 5" */
+	{ 0x54, 0xe4 }, 	/* "matrix coefficient 6" */
+	{ REG_COM13, COM13_GAMMA },
+	{ REG_COM15, COM15_RGB565|COM15_R00FF },
+	{ 0xff, 0xff },
+};
+
+/* V4L2_PIX_FMT_RGB565 gggbbbbb rrrrrggg */
+static struct regval ov_fmt_rgbp[] = {
+	{ REG_RGB444, 0 },	/* No RGB444 please */
+	{REG_TSLB, TSLB_BYTEORD },
+	{ REG_COM1, 0x0 },
+	{ REG_COM9, 0x38 }, 	/* 16x gain ceiling; 0x8 is reserved bit */
+	{ 0x4f, 0xb3 }, 	/* "matrix coefficient 1" */
+	{ 0x50, 0xb3 }, 	/* "matrix coefficient 2" */
+	{ 0x51, 0    },		/* vb */
+	{ 0x52, 0x3d }, 	/* "matrix coefficient 4" */
+	{ 0x53, 0xa7 }, 	/* "matrix coefficient 5" */
+	{ 0x54, 0xe4 }, 	/* "matrix coefficient 6" */
+	{ REG_COM13, COM13_GAMMA },
+	{ REG_COM15, COM15_RGB565|COM15_R00FF },
+	{ 0xff, 0xff },
+};
+
+/* V4L2_PIX_FMT_SRGGB8 */
+static struct regval ov_fmt_bayer[] = {
+	/* This changes color order */
+	{REG_TSLB, 0x40}, /* BGGR */
+	/* {REG_TSLB, 0x08}, */ /* BGGR with vertical image flipping */
+	{REG_COM15, COM15_R00FF },
+	{0xff, 0xff}, /* END MARKER */
+};
+/*
+ * Store a set of start/stop values into the camera.
+ */
+static int stk_sensor_set_hw(struct stk_camera *dev,
+		int hstart, int hstop, int vstart, int vstop)
+{
+	int ret;
+	unsigned char v;
+/*
+ * Horizontal: 11 bits, top 8 live in hstart and hstop.  Bottom 3 of
+ * hstart are in href[2:0], bottom 3 of hstop in href[5:3].  There is
+ * a mystery "edge offset" value in the top two bits of href.
+ */
+	ret =  stk_sensor_outb(dev, REG_HSTART, (hstart >> 3) & 0xff);
+	ret += stk_sensor_outb(dev, REG_HSTOP, (hstop >> 3) & 0xff);
+	ret += stk_sensor_inb(dev, REG_HREF, &v);
+	v = (v & 0xc0) | ((hstop & 0x7) << 3) | (hstart & 0x7);
+	msleep(10);
+	ret += stk_sensor_outb(dev, REG_HREF, v);
+/*
+ * Vertical: similar arrangement (note: this is different from ov7670.c)
+ */
+	ret += stk_sensor_outb(dev, REG_VSTART, (vstart >> 3) & 0xff);
+	ret += stk_sensor_outb(dev, REG_VSTOP, (vstop >> 3) & 0xff);
+	ret += stk_sensor_inb(dev, REG_VREF, &v);
+	v = (v & 0xc0) | ((vstop & 0x7) << 3) | (vstart & 0x7);
+	msleep(10);
+	ret += stk_sensor_outb(dev, REG_VREF, v);
+	return ret;
+}
+
+
+int stk_sensor_configure(struct stk_camera *dev)
+{
+	int com7;
+	/*
+	 * We setup the sensor to output dummy lines in low-res modes,
+	 * so we don't get absurdly hight framerates.
+	 */
+	unsigned dummylines;
+	int flip;
+	struct regval *rv;
+
+	switch (dev->vsettings.mode) {
+	case MODE_QCIF: com7 = COM7_FMT_QCIF;
+		dummylines = 604;
+		break;
+	case MODE_QVGA: com7 = COM7_FMT_QVGA;
+		dummylines = 267;
+		break;
+	case MODE_CIF: com7 = COM7_FMT_CIF;
+		dummylines = 412;
+		break;
+	case MODE_VGA: com7 = COM7_FMT_VGA;
+		dummylines = 11;
+		break;
+	case MODE_SXGA: com7 = COM7_FMT_SXGA;
+		dummylines = 0;
+		break;
+	default: STK_ERROR("Unsupported mode %d\n", dev->vsettings.mode);
+		return -EFAULT;
+	}
+	switch (dev->vsettings.palette) {
+	case V4L2_PIX_FMT_UYVY:
+		com7 |= COM7_YUV;
+		rv = ov_fmt_uyvy;
+		break;
+	case V4L2_PIX_FMT_RGB565:
+		com7 |= COM7_RGB;
+		rv = ov_fmt_rgbp;
+		break;
+	case V4L2_PIX_FMT_RGB565X:
+		com7 |= COM7_RGB;
+		rv = ov_fmt_rgbr;
+		break;
+	case V4L2_PIX_FMT_SBGGR8:
+		com7 |= COM7_PBAYER;
+		rv = ov_fmt_bayer;
+		break;
+	default: STK_ERROR("Unsupported colorspace\n");
+		return -EFAULT;
+	}
+	/*FIXME sometimes the sensor go to a bad state
+	stk_sensor_write_regvals(dev, ov_initvals); */
+	stk_sensor_outb(dev, REG_COM7, com7);
+	msleep(50);
+	stk_sensor_write_regvals(dev, rv);
+	flip = (dev->vsettings.vflip?MVFP_FLIP:0)
+		| (dev->vsettings.hflip?MVFP_MIRROR:0);
+	stk_sensor_outb(dev, REG_MVFP, flip);
+	if (dev->vsettings.palette == V4L2_PIX_FMT_SBGGR8
+			&& !dev->vsettings.vflip)
+		stk_sensor_outb(dev, REG_TSLB, 0x08);
+	stk_sensor_outb(dev, REG_ADVFH, dummylines >> 8);
+	stk_sensor_outb(dev, REG_ADVFL, dummylines & 0xff);
+	msleep(50);
+	switch (dev->vsettings.mode) {
+	case MODE_VGA:
+		if (stk_sensor_set_hw(dev, 302, 1582, 6, 486))
+			STK_ERROR("stk_sensor_set_hw failed (VGA)\n");
+		break;
+	case MODE_SXGA:
+	case MODE_CIF:
+	case MODE_QVGA:
+	case MODE_QCIF:
+		/*FIXME These settings seem ignored by the sensor
+		if (stk_sensor_set_hw(dev, 220, 1500, 10, 1034))
+			STK_ERROR("stk_sensor_set_hw failed (SXGA)\n");
+		*/
+		break;
+	}
+	msleep(10);
+	return 0;
+}
+
+int stk_sensor_set_brightness(struct stk_camera *dev, int br)
+{
+	if (br < 0 || br > 0xff)
+		return -EINVAL;
+	stk_sensor_outb(dev, REG_AEB, max(0x00, br - 6));
+	stk_sensor_outb(dev, REG_AEW, min(0xff, br + 6));
+	return 0;
+}
+

drivers/media/video/stk-webcam.h

+/*
+ * stk-webcam.h : Driver for Syntek 1125 USB webcam controller
+ *
+ * Copyright (C) 2006 Nicolas VIVIEN
+ * Copyright 2007-2008 Jaime Velasco Juan <jsagarribay@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef STKWEBCAM_H
+#define STKWEBCAM_H
+
+#include <linux/usb.h>
+#include <media/v4l2-common.h>
+
+#define DRIVER_VERSION		"v0.0.1"
+#define DRIVER_VERSION_NUM	0x000001
+
+#define MAX_ISO_BUFS		3
+#define ISO_FRAMES_PER_DESC	16
+#define ISO_MAX_FRAME_SIZE	3 * 1024
+#define ISO_BUFFER_SIZE		(ISO_FRAMES_PER_DESC * ISO_MAX_FRAME_SIZE)
+
+
+#define PREFIX				"stkwebcam: "
+#define STK_INFO(str, args...)		printk(KERN_INFO PREFIX str, ##args)
+#define STK_ERROR(str, args...)		printk(KERN_ERR PREFIX str, ##args)
+#define STK_WARNING(str, args...)	printk(KERN_WARNING PREFIX str, ##args)
+
+struct stk_iso_buf {
+	void *data;
+	int length;
+	int read;
+	struct urb *urb;
+};
+
+/* Streaming IO buffers */
+struct stk_sio_buffer {
+	struct v4l2_buffer v4lbuf;
+	char *buffer;
+	int mapcount;
+	struct stk_camera *dev;
+	struct list_head list;
+};
+
+enum stk_mode {MODE_VGA, MODE_SXGA, MODE_CIF, MODE_QVGA, MODE_QCIF};
+
+struct stk_video {
+	enum stk_mode mode;
+	int brightness;
+	__u32 palette;
+	int hflip;
+	int vflip;
+};
+
+enum stk_status {
+	S_PRESENT = 1,
+	S_INITIALISED = 2,
+	S_MEMALLOCD = 4,
+	S_STREAMING = 8,
+};
+#define is_present(dev)		((dev)->status & S_PRESENT)
+#define is_initialised(dev)	((dev)->status & S_INITIALISED)
+#define is_streaming(dev)	((dev)->status & S_STREAMING)
+#define is_memallocd(dev)	((dev)->status & S_MEMALLOCD)
+#define set_present(dev)	((dev)->status = S_PRESENT)
+#define unset_present(dev)	((dev)->status &= \
+					~(S_PRESENT|S_INITIALISED|S_STREAMING))
+#define set_initialised(dev)	((dev)->status |= S_INITIALISED)
+#define set_memallocd(dev)	((dev)->status |= S_MEMALLOCD)
+#define unset_memallocd(dev)	((dev)->status &= ~S_MEMALLOCD)
+#define set_streaming(dev)	((dev)->status |= S_STREAMING)
+#define unset_streaming(dev)	((dev)->status &= ~S_STREAMING)
+
+struct regval {
+	unsigned reg;
+	unsigned val;
+};
+
+struct stk_camera {
+	struct video_device vdev;
+	struct usb_device *udev;
+	struct usb_interface *interface;
+	int webcam_model;
+	struct file *owner;
+
+	u8 isoc_ep;
+
+	struct kref kref;
+	/* Not sure if this is right */
+	atomic_t urbs_used;
+
+	struct stk_video vsettings;
+
+	enum stk_status status;
+
+	spinlock_t spinlock;
+	wait_queue_head_t wait_frame;
+
+	struct stk_iso_buf *isobufs;
+
+	int frame_size;
+	/* Streaming buffers */
+	unsigned int n_sbufs;
+	struct stk_sio_buffer *sio_bufs;
+	struct list_head sio_avail;
+	struct list_head sio_full;
+	unsigned sequence;
+};
+
+#define to_stk_camera(d) container_of(d, struct stk_camera, kref)
+#define vdev_to_camera(d) container_of(d, struct stk_camera, vdev)
+
+void stk_camera_delete(struct kref *);
+int stk_camera_write_reg(struct stk_camera *, u16, u8);
+int stk_camera_read_reg(struct stk_camera *, u16, int *);
+
+int stk_sensor_outb(struct stk_camera *dev, u8 reg, u8 val);
+int stk_sensor_inb(struct stk_camera *dev, u8 reg, u8 *val);
+int stk_sensor_init(struct stk_camera *);
+int stk_sensor_configure(struct stk_camera *);
+int stk_sensor_sleep(struct stk_camera *dev);
+int stk_sensor_wakeup(struct stk_camera *dev);
+int stk_sensor_set_brightness(struct stk_camera *dev, int br);
+
+#endif