Update test-xts-acts-start-ability-timeout-increment.patch 
to increase start ability timeout in actsbundlemanagertest
and actsbundlemanageruninstall.

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

This is the strings returned with GetHardwareModel(), GetHardwareProfile() and
so on.  There are more values in there to configure if we want to.

While the hispark boards seems to have some other, more complicated, mechanism
for providing these values, I have chosen to simply configure them directly in
the //base/startup/syspara_lite for now.  KISS.

Project 'eclipse/oniro-core/meta-openharmony' was moved 
to 'eclipse/oniro-oh/meta-openharmony'. Therefore updating
links and references accordingly.

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

The API version has been missed to be updated from work on earlier OH
versions. Also switching to Release as releasetype as see in the release
tarballs.

Signed-off-by: Stefan Schmidt <stefan.schmidt@huawei.com>

add patch test-xts-acts-wifi-test-fix.patch

```
test/xts/acts: fix wifi acts to wait for async callback execution 
 
in multiple wifi testcases the async callback/promise are not actually executed, 
therefore the testcases terminate before the asserts inside the callbacks are 
checked causing the testcases to pass even when things are not actually properly 
working. Fixing by moving the done() functions inside the callback or in the `.then(...`; 
Remove sleeps where not necessary; 
 
Apply to test/xts/acts 
```

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

add and apply wifi-services-networkmanager-integration.patch
```
foundation/communication/wifi: implement wifi services with network manager

With the aim of oniro/linux upstream hardware support we replace the wifi hal service
with libnm calls to network manager. This way we can support wifi without having
to write new wifi drivers with hdf.
Currently, the following operations are reimplemented with libnm:
EnableWifi, DisableWifi, AddDeviceConfig, ConnectToNetwork, ConnectToDevice,
Disconnect, IsWifiActive, Scan, GetScanInfoList.

Apply to foundation/communication/wifi

Upstream-Status: Inappropriate
```
Signed-off-by: Francesco Pham <francesco.pham@huawei.com>
Signed-off-by: Kareem Zarka <kareem.zarka@huawei.com>

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

remove wlan_device_driver, third-party-wpa-supplicant, wifi_hal 
to arrange for network manager integration.

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

The default test timeout is 5000ms which is too short, causing some testcases
to exceed timeout. Increasing the timeout to 20 seconds.

START_ABILITY_TIMEOUT is too short, causing some 
testcases in ActsBmsModuleUsageRecordTest to exceed timeout. 
Increasing the timeout to 15 seconds.

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

This should be the final piece in enabling wifi components in OH.
The wifi service as well as the JS wifi API is being enabled and
packaged.

Signed-off-by: Stefan Schmidt <stefan.schmidt@huawei.com>

With the hdf wlan libraries in place we can now enable the
wpa_supplicant build.

Signed-off-by: Stefan Schmidt <stefan.schmidt@huawei.com>

The HDF peripherals drivers for wlan had been patched out
before. Enable them again in the build and package the
needed files.

They do not end up being installed in the normal libdir so
we pick them from the build dir instead.

Signed-off-by: Stefan Schmidt <stefan.schmidt@huawei.com>

weston needs to be running before system abilities are able to start.

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

dsoftbus service depends on network-online.target because
it needs eth0 network adapter ready. Dsoftbus is crashing for a
segfault when starting before networking is ready.

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

add InnerBundleInfo-initialize-installationFree.patch
apply to foundation/appexecfwk/standard

```
InnerModuleInfo: initialize installationFree to false

uninitialized installationFree property of InnerModuleInfo causes 
ActsBmsModuleUsageRecordTest to sometimes fail on 
`expect(data.installationFreeSupported).assertEqual(false);`
Initializing installationFree property to false.
```

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

add appdatamgr-IsColumnNull-initialize-result.patch and apply to
foundation/distributeddatamgr/appdatamgr

```
testIsColumnNull0003 ACTS testcase sometimes fail because the
result value of IsColumnNull is unpredictable when an error is returned.
This is because AbsSharedResultSet::IsColumnNull does not set any
value to &isNull when there is an error. The result value is
not initialized, producing an unpredictable output of IsColumnNull.
```

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

adding test-xts-acts-testRdbStoreUpdate0001-await-updatePromise.patch and apply to test/xts/acts .

```
The testRdbStoreUpdate0001 testcase which is part of ActsAppdatamagrJsTest
sometimes fails (in our case on raspberrypi4-64). The reason is that
the values in rdbStore are inspected before the update is completed.
The `await updatePromise` command that is clearly needed was commented out
for some unknown reason. Reintroducing the await command to avoid race
conditions.
```

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

On raspberry pi with VC4 drm graphics driver DRM_IOCTL_WAIT_VBLANK
is failing returning EINVAL for some reason, applying  drmWaitVBlank hack
also on EINVAL until a proper solution is provided.

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

Adding `Restart=on-failure` to all openharmony services

weston service is hanging at startup (SIGHUP) on raspberrypi4-64
adding `Restart=always` to systemd unit to restart
weston service when hanging. `Restart=on-failure` is not enough here.

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

This reverts commit 312c51f4.

We are seeing multiple different race conditions causing random failures in
ACTS, many of them (maybe all) goes away when we stub out the mostly stub out
JSView::CreateComponent()

As before, this should be dropped again later on when the problems have been
solved.  And is required in order to get graphics support to work.

Signed-off-by: Esben Haabendal <esben@geanix.com>

Previously, the libinput quirks files were not being installed by the
package. This commit installs them to the
appropriate location.

Signed-off-by: Kareem Zarka <kareem.zarka@huawei.com>

Most .service files had the license file to go with it, but a few where
missing. Adding the remaining ones here.

Signed-off-by: Stefan Schmidt <stefan.schmidt@huawei.com>

We removed the samgr_standard.cfg after conversion to systemd, but
forgot thios extra file.

Signed-off-by: Stefan Schmidt <stefan.schmidt@huawei.com>

Alle these should hopefully not be needed anymore, with the workaround for the
race condition in ace engine.

Signed-off-by: Esben Haabendal <esben@geanix.com>

When starting up abilities, there is a race condition between OnSurfaceChanged
and RunPage, which both are executed as PostTask on the same task executor.
This executor works in FIFO mode, and if (when) the OnSurfaceChanged comes
first, it will fail with a nullptr check on runningPage_.  This is because the
runningPage_ variable is set by the RunPage PostTask.

This patch is obviously just a workaround, and not a proper fix.  Hopefully, 500
ms will be enough in all relevant situations, but at least in theory, the
problem can still appear.

Signed-off-by: Esben Haabendal <esben@geanix.com>

Graphics seems to be basically working now, both on QEMU and rpi4 (plus/minus a
few quirks).  This patch is now causing more problems than it is solving, so
let's revert it for now.

We need to take care that slow rendering is handled properly.  We might have
more test cases failing due to this after dropping this patch.

Signed-off-by: Esben Haabendal <esben@geanix.com>

Signed-off-by: Esben Haabendal <esben@geanix.com>

This simplifies initialization, by having param_service starting up with all the
default parameter values instead of setting them manually in different places.

Signed-off-by: Esben Haabendal <esben@geanix.com>

This service doesn't seem to be needed for ACTS compliance, and consumes a lot
of CPU time when activated during some ACTS tests.

Signed-off-by: Esben Haabendal <esben@geanix.com>

Signed-off-by: Esben Haabendal <esben@geanix.com>

Signed-off-by: Esben Haabendal <esben@geanix.com>

Signed-off-by: Esben Haabendal <esben@geanix.com>

Signed-off-by: Esben Haabendal <esben@geanix.com>

These are used by ACTS test cases, seemingly as a workaround for problems with
hilogd stalling/hanging.

Signed-off-by: Esben Haabendal <esben@geanix.com>

The services relying on the /dev/dri/card0 should not be started before the
device have been created.

Signed-off-by: Esben Haabendal <esben@geanix.com>

Signed-off-by: Esben Haabendal <esben@geanix.com>

With the removal of all services from the openharmony-preinit script, this is
now a proper oneshot service, and can/must be run before starting the actual
services.

The goal is still to get rid if this script completely.

Anything it does that is actually needed should be moved to the appropriate OH
service unit files.

Signed-off-by: Esben Haabendal <esben@geanix.com>

This avoids param service log information to end up spamming the console.

Signed-off-by: Esben Haabendal <esben@geanix.com>

Signed-off-by: Esben Haabendal <esben@geanix.com>