Yes, this is still not nice, but this is what we are doing for now.
We will fix it as we create systemd units for each service.

Signed-off-by: Esben Haabendal <esben@geanix.com>

The patch was a hacky way to allow starting of demo hap applications from a root user.
The proper way to start the demo apps is by running `aa start ...` from the system user.
For example:
```
$ hdc shell "su system -c 'aa start -a ohos.samples.clock.MainAbility -b ohos.samples.clock'"
```

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

remove test-xts-acts-Start-tests-from-onInit.patch because now the tests are properly
executed even without it. 
Probably after fixing a segfault problem in the graphics stack, the tests execution
have been fixed.

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

Fix DefPermission.hap filename typo which is causing a file not found error 
when running ActsContextTest ACTS tests. 
 
Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

START_ABILITY_TIMEOUT is 3000ms which is too short in our case, causing some 
testcases in ActsBmsModuleUsageRecordTest to exceed timeout. 
Increasing the timeout to 30 seconds.

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

OpenHarmony init system, is responsible for creation of some directories, handling 
permissions and running services with appropriate UIDs/GIDs. Currently in 
meta-openharmony we have everything run as root, which causes some issues.

Adding system user with UID 1000. 
Run system services as system user.

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

The default test timeout is 5000ms which is too short, causing some testcases
to exceed timeout. Increasing the timeout to 60 seconds.

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

OpenHarmony uses couple of UIDs/GIDs for running it's services.
Currently in meta-openharmony we have everything run as root, which 
causes some issues in starting abilities. As a temporary workaround
we are removing the Uid check.

Apply to foundation/aafwk/standard

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

RenderText::PerformLayout() is causing a SIGSEGV for some reasons. 
The error appears to be raised in the Measure method(). This is
causing hap applications to crash, including ACTS test suites.
As a temporary solution we are removing the part of the code that
is raising the segfault. The side effect of this is that texts are 
not properly rendered.

Apply patch to foundation/ace/ace_engine

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

A wrong permission mode causes ActsAppdatamagrJsTest ACTS test suite to 
fail because it fails to open /dev/ashmem due to a "Permission denied" error. 
Changing permission to /dev/ashmem: "chmod 666 /dev/ashmem" because 
it needs to be rw for all users.

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

currently /data directory has to be chmod -R 777 /data in order for services to work

one of possible manifestation of this not being done is create display failed! error in the logs

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

Currently, due to some services/graphics issues onShow callback is not being
called and therefore tests are not executed. For screen-less devices graphics
stack should not be required and therefore moving test execution to onInit

This patch allows ACTS tests output to be shown on the logs

Signed-off-by: Robert Drab <robert.drab@huawei.com>
Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

Robert Drab authored 2 years ago and Francesco Pham committed 2 years ago

Signed-off-by: Robert Drab <robert.drab@huawei.com>

Signed-off-by: Robert Drab <robert.drab@huawei.com>
Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

enable RemainAfterExit to openharmony-preinit.service to prevent 
the service from getting deactivated after initialization.

Signed-off-by: Francesco Pham <francesco.pham@huawei.com>

Signed-off-by: Thierry Escande <thierry.escande@huawei.com>

Robert Drab authored 2 years ago and Thierry Escande committed 2 years ago

Signed-off-by: Robert Drab <robert.drab@huawei.com>
Signed-off-by: Thierry Escande <thierry.escande@huawei.com>

Robert Drab authored 2 years ago and Thierry Escande committed 2 years ago

Closes https://gitlab.eclipse.org/eclipse/oniro-core/meta-openharmony/-/issues/73



Signed-off-by: Robert Drab <robert.drab@huawei.com>
Signed-off-by: Thierry Escande <thierry.escande@huawei.com>

Robert Drab authored 2 years ago and Thierry Escande committed 2 years ago

Closes https://gitlab.eclipse.org/eclipse/oniro-core/meta-openharmony/-/issues/75



Signed-off-by: Robert Drab <robert.drab@huawei.com>
Signed-off-by: Thierry Escande <thierry.escande@huawei.com>

The OpenHarmony services are now started from the pre-init script. The
script checks if the corresponding systemd services are enabled before
running them. That way, the services startup can be controlled using
systemctl.

Signed-off-by: Robert Drab <robert.drab@huawei.com>
Signed-off-by: Thierry Escande <thierry.escande@huawei.com>

This change turns the OpenHarmony systemd services into dummy services
that doesn't start them. Instead, the preinit script will check for
these services state and start the corresponding services if their
systemd unit are enabled.

Signed-off-by: Thierry Escande <thierry.escande@huawei.com>

This sets NODE_OPTIONS to pass '--openssl-legacy-provider' to node 17
and fixes the error 'digital envelope routines::unsupported'.
This was resulting in ACTS hap package not contaning the manifest and js
assets files.

Even if NODE_OPTIONS is set in the openharmony-standard recipe, it also
has to be set in the nodejs invocation environment because the recipe
environment is ignored in build_js_assets.py.

Signed-off-by: Thierry Escande <thierry.escande@huawei.com>

This fixes the following nodejs 17 error:
 error:0308010C:digital envelope routines::unsupported

The option '--openssl-legacy-provider' is passed to nodejs and a few
OPENSSL variables are also set to point to the native sysroot ssl conf.

Signed-off-by: Thierry Escande <thierry.escande@huawei.com>

This test doesn't compile and is not mandatory, so remove it.

Signed-off-by: Thierry Escande <thierry.escande@huawei.com>

This adds needed REDPENDS for openharmony-standard-ptest package.

Signed-off-by: Thierry Escande <thierry.escande@huawei.com>

Signed-off-by: Esben Haabendal <esben.haabendal@huawei.com>

It is only used in two unittest testcases, and something is causing it to not be
included in the generated image, although we add the necessary parts
information.
So making it static is a simple workaround for that.

Signed-off-by: Esben Haabendal <esben.haabendal@huawei.com>

We are renaming the ${PN}-faultloggerd package to ${PN}-faultlogger, as it will
include both client and server parts.

Signed-off-by: Esben Haabendal <esben.haabendal@huawei.com>

Kristijonas Čiulčinskas authored 2 years ago and Esben Haabendal committed 2 years ago

Signed-off-by: Kristijonas Ciulcinskas <kristijonas.ciulcinskas@huawei.com>

Add support for qemuarm-efi, qemuarm64-efi, qemuarm64 and raspberrypi4-64
target machines

Signed-off-by: Bernhard Rosenkränzer <bernhard.rosenkraenzer.ext@huawei.com>

This fixes the problem that have caused us to always rebuilding
openharmony-standard recipe in CI, even if no changes would seem to
require it.

The fix is to rewrite the SRC_URI variable to not include git revisions
but use SRCREV_* variables for that instead, and then setting up
SRCREV_FORMAT appropriately to allow expansion of SRCPV with a meaningful
and correct value.

Signed-off-by: Esben Haabendal <esben.haabendal@huawei.com>

These are services using the System Ability framework through the
executable sa_main. These services depend on and are started after the
System Ability Manager service (samgr).

Most of them are noop for now. No process is created after sa_main exits
for all of these services.

Signed-off-by: Thierry Escande <thierry.escande@huawei.com>

Signed-off-by: Thierry Escande <thierry.escande@huawei.com>

Signed-off-by: Thierry Escande <thierry.escande@huawei.com>

Signed-off-by: Thierry Escande <thierry.escande@huawei.com>

This enables the samgr service and sets it to start after the param
service.

Signed-off-by: Thierry Escande <thierry.escande@huawei.com>

Merge me with 600b3ba

This mofifies the appspawn service to start after the samgr one with a 2
seconds delay.

Signed-off-by: Thierry Escande <thierry.escande@huawei.com>

With this change, the hilogd service depends on and starts after the
OpenHarmony param service.

Signed-off-by: Thierry Escande <thierry.escande@huawei.com>

This service starts the param_service server, used to access the
OpenHarmony param, a kind of registry accessible through the network.

The service requires and starts after the openharmony-preinit systemd
service.

Signed-off-by: Thierry Escande <thierry.escande@huawei.com>

This oneshot service creates the folder architecture needed by the
OpenHarmony services and components.

All other OpenHarmony services will be started after this one.

These folders are intended to be created by their own systemd service
units, but since they are not all in place yet, this service acts as a
generic placeholder in the meantime.

The service also change /dev/binder file mode to 0666.

Signed-off-by: Thierry Escande <thierry.escande@huawei.com>