This bundles a rather large rename of all the recipes, descriptions and
comments, with the exception of repositories referenced from gitee or
other third party system (e.g. launchpad PPAs or COPR repositories).

Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

We use this layer to store temporary fixes while upstream catches up.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Allow using the clang 12 based toolchain

Signed-off-by: Bernhard Rosenkränzer <bernhard.rosenkraenzer.ext@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

OSTC now publishes a complete sstate-cache and download cache for
a set of builds and configurations. Using those caches can dramatically
speed up setting up the development environment by avoiding huge source
downloads (about 12GB at the time of this writing) and virtually all of
the compilation (close to an hour on a 6 core 8th gen Intel mobile CPU)
at the cost of miniscule sstate cache download (on the order of one
gigabyte).

The setting is added at the bottom of local.conf, where it is easier to
spot and disable, if desired.

Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@huawei.com>

These machines are not as of now in the scope of the project. We remove
them from the local.conf samples to not leave room for confusion. This
aligns the qemu set of supported targets with `conf-notes.txt` and
general documentation too.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Wojciech Zmuda authored 4 years ago and Andrei Gherzan committed 4 years ago

Strong (=) assignment makes it impossible to override DISTRO
in command line when calling bitbake e.g.:

  $ DISTRO=myCoolOS bitbake myCoolImage

With strong assignment, the local.conf DISTRO setting has
precendence over command line setting. Using weak assignment
allows user to build other DISTRO without editing local.conf.

Signed-off-by: Wojciech Zmuda <wojciech.zmuda@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Our bblayers file diverged between the different flavours and e.g. the
meta-ohos-foundation was still present for zephyr and freertos.

We enable all layers on all flavours. The only overhead should be in
parsing the recipes. If something else breaks we consider this a bug
worth fixing.

The usage of symlinks should be safe here. Yocto buildhost will almost
always be Linux based, but it this should even work on Windows by now.
If we run into trouble with this we can always got back to three files.

Signed-off-by: Stefan Schmidt <stefan.schmidt@huawei.com>

Since https://git.ostc-eu.org/OSTC/OHOS/meta-av96/-/merge_requests/4


it is no longer needed.

Signed-off-by: Zbigniew Bodek <zbigniew.bodek@huawei.com>

The BSP layer is now a subdirectory - meta-av96-core.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

The layer was restructured and all the BSP support is now provided
through the machine configuration.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Add meta-qt5, new dependency layer of meta-av96.

Signed-off-by: Zbigniew Bodek <zbigniew.bodek@huawei.com>

This will include definitions and info for useful variables like DL_DIR,
SSTATE_DIR etc.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Add general description of MACHINE and add bblayers to template.

Signed-off-by: Ettore Chimenti <ettore.chimenti@seco.com>

Signed-off-by: Robert Drab <robert.drab@huawei.com>

meta-ohos-foundation is currently unused, therefore it should not
be included in the bblayers.conf.sample file.

meta-ohos-acts layer contains recipes for building OHOS tests.

Signed-off-by: Robert Drab <robert.drab@huawei.com>

Make a default machine first on the list and in bold (in README.md)
to avoid ambiguity.

Signed-off-by: Robert Drab <robert.drab@huawei.com>

zephyr is no longer preferred, default DISTRO. Change it
to openharmony-zephyr.

Signed-off-by: Zbigniew Bodek <zbigniew.bodek@huawei.com>

meta-ohos-core contains DISTRO configurations that
may be used by Zephyr build. In the future some images
also may be added.

Signed-off-by: Zbigniew Bodek <zbigniew.bodek@huawei.com>

Poky is no longer correct default DISTRO. Change it
to openharmony-linux.

Signed-off-by: Zbigniew Bodek <zbigniew.bodek@huawei.com>

Add missing boards to the supported boards list.

Add missing hyphen in `runqemu` command.

Signed-off-by: Wojciech Zmuda <wojciech.zmuda@huawei.com>

Explicitly setting `DEPLOY_DIR_IMAGE` is not needed, since we have
`TEMPLATECONF`.
Setting `TEMPLATECONF` on the `source` step makes both `bitbake` and
`runqemu` steps share the same `DISTRO` setting, which sets
`DEPLOY_DIR_IMAGE` properly. Remove it from readme and conf-notes shown
after sourcing the env.

Signed-off-by: Wojciech Zmuda <wojciech.zmuda@huawei.com>

Since the default images have changed, switch to
the new ones recommended for OpenHarmony.

Signed-off-by: Zbigniew Bodek <zbigniew.bodek@huawei.com>

Remove redundant IMAGE_INSTALL_append from local.conf.sample.
openharmony-image-base and openharmony-image-extra images
will include those packages.

Signed-off-by: Zbigniew Bodek <zbigniew.bodek@huawei.com>

Add meta-ohos-core to the sample list of layers being
used in the project.
The layer contains:
* Core elements of the OpenHarmony distribution
* Reference images recipes

Signed-off-by: Zbigniew Bodek <zbigniew.bodek@huawei.com>

Fix typo appned -> append to include networking packages as intended.
Add leading space to not break things being appended.

Signed-off-by: Zbigniew Bodek <zbigniew.bodek@huawei.com>

Having core-image-minimal as a default first-on-the-list image
can be misleading when adding new boards to the build system
as this image allows only to boot-up minimal system without
any features that the board may support in terms of connectivity, etc.

core-image-full-cmdline, likewise, does not include "kernel-modules"
and can cause similar confusion.

Closes: https://git.ostc-eu.org/OSTC/OHOS/meta-ohos/-/issues/7


Signed-off-by: Robert Drab <robert.drab@huawei.com>

Signed-off-by: Robert Drab <robert.drab@huawei.com>

Add required meta-layers to bblayers.conf.sample.
Add dependencies to local.conf.sample that provide necessary
packages to enable Ethernet, WiFi and Bluetooth connectivity.
Mention the board in README.

Signed-off-by: Wojciech Zmuda <wojciech.zmuda@huawei.com>

Alberto Merciai authored 4 years ago and Ettore Chimenti committed 4 years ago

Co-authored-by: Ettore Chimenti <ettore.chimenti@seco.com>
Co-authored-by: Tommaso Merciai <tommaso.merciai@seco.com>
Co-authored-by: Alberto Merciai <alberto.merciai@seco.com>
Signed-off-by: Ettore Chimenti <ettore.chimenti@seco.com>

Copy of Poky sample files with default distro set
to freertos

meta-freertos and meta-ohos-foundation layers added
to bblayers.conf.sample

Signed-off-by: Robert Drab <robert.drab@huawei.com>

Copy of Poky sample files with default distro set
to zephyr and following meta-layer in bblayers.conf.sample:
- poky/meta
- meta-openembedded/meta-oe
- meta-openembedded/meta-python
- meta-zephyr
- meta-ohos/meta-ohos-foundation

Signed-off-by: Robert Drab <robert.drab@huawei.com>

Copy of Poky sample files with default distro set
to poky and meta-ohos-foundation layer added

Signed-off-by: Robert Drab <robert.drab@huawei.com>