Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Demo consists of two IOT endpoints: sensors board
and bulb/LED board.
Add image to specialize base settings to the LED board's
configuration. In this case settings related to LCD display
and sensors are disabled.

Signed-off-by: Zbigniew Bodek <zbigniew.bodek@huawei.com>

Demo consists of two IOT endpoints: sensors board
and bulb/LED board.
Add image to specialize base settings to the sensors board's
configuration. In this case LED control is disabled.

Signed-off-by: Zbigniew Bodek <zbigniew.bodek@huawei.com>

Add meta-zephyr from our local fork to the required layers.
This should be changed to upstream version when it's
aligned with our local state.

Signed-off-by: Zbigniew Bodek <zbigniew.bodek@huawei.com>

- Allows for building SmartHome Demo Zephyr application
- Requires meta-zephyr layer
- Application is going to be built with all options enabled (default)

Signed-off-by: Zbigniew Bodek <zbigniew.bodek@huawei.com>

- Remove demo description and HOWTO from meta-ohos-demo README.md
- Improve building guidelines in the smart-panel.rst
  Reference to building an image for Avenger96 + explicit command
  for building dashboard demo.

Signed-off-by: Zbigniew Bodek <zbigniew.bodek@huawei.com>

This was a temporary switch while we investigate and fix a crash on
webkitgtk with musl. This was done so we can revert it.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

The soft assigment needs to go before including openharmony-linux.conf
as that also defines a default (soft) for TCLIBC.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

This would make the boot process into the browser a bit clearer as
having Home Assistant up and running takes a couple of good seconds.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

The browser is meant to be the only UI for the running device. So
stopping it would make little sense. epiphany, even in app mode, doesn't
hide the window controls - including the window closing button. If that
is triggered by mistake, systemd would restart it unconditionally.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

The app is directly in WORKDIR without a prefix.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Zbigniew Bodek <zbigniew.bodek@huawei.com>

Add bbappend to install main.conf file and set
AutoEnable flag to bring up BLE during boot.
Other options are commented out by default, they
may be useful for further BLE behavior tuning.

Signed-off-by: Zbigniew Bodek <zbigniew.bodek@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

* disable getty on tty1
* disable weston toolbar (as we are running only one app at boot)
* define the epiphany app to use (HomeAssistant)
* run the HomeAssistant epiphany app at boot

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

This image doesn't need epiphany broweser per se, it actually needs the
epiphany browser for a specific app. Include epiphany-app and let the
epiphany dependency be pulled automatically.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

This support is done configurable using the following variables:

EPIPHANY_APP             - Defines the app name (which needs to be the
			   directory name in FILESPATH/FILEEXTRAPATHS).
			   Currently defines it for HomeAssistant. If
			   this directory provides a
			   `service-override.conf`, the build system
			   will set it up as a systemd service
			   configuration for the main boot systemd
                           service.
EPIPHANY_URL             - The URL that the browser will load at
                           startup.
EPIPHANY_RDEPENDS        - Extra dependencies. If the specific
			   application needs extra dependencies at
                           runtime, they can be specifed here.
EPIPHANY_SERVICE_ENABLED - By default disabled (0). When enabled (1), it
			   will enable loading the epiphany app at boot.

The configuration defaults to setting up Epiphany browser in application
mode for a local instance of Home Assistant.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

This is not ideal but will unblock using the browser while we
investigate the matter.

See: https://bugzilla.yoctoproject.org/show_bug.cgi?id=14281



Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

This image is part of the dashboard gateway demo and is meant to run on
the linux based target running HomeAssistant.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

This configuration inherits the ohos distro configuration but makes
configurations specific to the dashboard demo use-cases. For now we only
handle the HomeAssistant version requirements and set a custom hostname.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>