Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

The soft assigment needs to go before including openharmony-linux.conf
as that also defines a default (soft) for TCLIBC.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

OSTC now publishes a complete sstate-cache and download cache for
a set of builds and configurations. Using those caches can dramatically
speed up setting up the development environment by avoiding huge source
downloads (about 12GB at the time of this writing) and virtually all of
the compilation (close to an hour on a 6 core 8th gen Intel mobile CPU)
at the cost of miniscule sstate cache download (on the order of one
gigabyte).

The setting is added at the bottom of local.conf, where it is easier to
spot and disable, if desired.

Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@huawei.com>

This drops the local definitions of all the build flavours and all the
targets based on "develop.xml". This significantly simplifies this
pipeline and reduces duplication of the set of supported targets.

Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@huawei.com>

This would make the boot process into the browser a bit clearer as
having Home Assistant up and running takes a couple of good seconds.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

ACTS uses -fprofile-instr-generate, creating a need to pull in
compiler-rt's static profiling library when using clang

Signed-off-by: Bernhard Rosenkränzer <bernhard.rosenkraenzer.ext@huawei.com>

These machines are not as of now in the scope of the project. We remove
them from the local.conf samples to not leave room for confusion. This
aligns the qemu set of supported targets with `conf-notes.txt` and
general documentation too.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Due to a configuration bug in upstream, the build system outputs a
configuration warning similar to:

---------- CONFIG_SERIAL_OF_PLATFORM -----------------
Config: CONFIG_SERIAL_OF_PLATFORM
From:
[...]/tmp/work-shared/qemux86-64/kernel-source/.kernel-meta/configs/v5.10/standard/cfg/8250.cfg
Requested value:  CONFIG_SERIAL_OF_PLATFORM=y
Actual value:

Avoid this by disabling the specific config.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Due to a configuration bug in upstream, the build system outputs a
configuration warning similar to:

---------- CONFIG_SERIAL_OF_PLATFORM -----------------
Config: CONFIG_SERIAL_OF_PLATFORM
From:
[...]/tmp/work-shared/qemux86-64/kernel-source/.kernel-meta/configs/v5.10/standard/cfg/8250.cfg
Requested value:  CONFIG_SERIAL_OF_PLATFORM=y
Actual value:

Avoid this by disabling the specific config.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Due to a configuration bug in upstream, the build system outputs a
configuration warning similar to:

---------- CONFIG_SERIAL_OF_PLATFORM -----------------
Config: CONFIG_SERIAL_OF_PLATFORM
From:
[...]/tmp/work-shared/qemux86-64/kernel-source/.kernel-meta/configs/v5.10/standard/cfg/8250.cfg
Requested value:  CONFIG_SERIAL_OF_PLATFORM=y
Actual value:

Avoid this by disabling the specific config.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Imported from poky[1].

[1] 7e9ea9d807ba7682c9bd81a0a8711a5af08aec21

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Imported from poky[1].

[1] 7e9ea9d807ba7682c9bd81a0a8711a5af08aec21

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Imported from poky[1].

[1] 7e9ea9d807ba7682c9bd81a0a8711a5af08aec21

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

By just installing this into all of our images we open the door for
in-field debugging. It needs to be invoked manually and we do not drag
in any dbg packages so the image size stays sane.

Combined with a remote debugging setup and copy of the images files and
symbols this can allow full debugging capabilities with GDB or an IDE
later on.

Signed-off-by: Stefan Schmidt <stefan.schmidt@huawei.com>

- Use re-usable .workspace job from pipelines repository
- Less repetition with more targets supported
- Higher uniformity with the pipeline at the manifest repository.

Closes: https://git.ostc-eu.org/OSTC/OHOS/meta-ohos/-/issues/22


Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@huawei.com>

Wojciech Zmuda authored 4 years ago and Andrei Gherzan committed 4 years ago

Strong (=) assignment makes it impossible to override DISTRO
in command line when calling bitbake e.g.:

  $ DISTRO=myCoolOS bitbake myCoolImage

With strong assignment, the local.conf DISTRO setting has
precendence over command line setting. Using weak assignment
allows user to build other DISTRO without editing local.conf.

Signed-off-by: Wojciech Zmuda <wojciech.zmuda@huawei.com>

The browser is meant to be the only UI for the running device. So
stopping it would make little sense. epiphany, even in app mode, doesn't
hide the window controls - including the window closing button. If that
is triggered by mistake, systemd would restart it unconditionally.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

ACTS tests a subset of ltp open_posix_testsuite.
Spread will be used to selectively execute required tests.

Related-to: https://git.ostc-eu.org/OSTC/OHOS/components/staging/xts_acts/-/issues/15


Signed-off-by: Robert Drab <robert.drab@huawei.com>

The app is directly in WORKDIR without a prefix.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Zbigniew Bodek <zbigniew.bodek@huawei.com>

Add bbappend to install main.conf file and set
AutoEnable flag to bring up BLE during boot.
Other options are commented out by default, they
may be useful for further BLE behavior tuning.

Signed-off-by: Zbigniew Bodek <zbigniew.bodek@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Available knobs:

WESTON_INI_BACKGROUND_IMAGE - Full runtime path of the background image.
			      The base name of this path needs to be
                              available in FILEPATH (EXTRAFILESPATH).
WESTON_INI_BACKGROUND_COLOR - Background color - default to white.
WESTON_INI_BACKGROUND_TYPE  - Background type - defaults to centered.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

In this way, multiple recipes can take advantage of various assets (eg.
images, logos).

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>