FreeRTOS switched to use main branch instead of master while our code
still looks for master. Overriding of bb class is needed for the change
thus it requires change in the order of layers.

Closes: https://git.ostc-eu.org/OSTC/OHOS/meta-ohos/-/issues/132


Signed-off-by: Pavel Zhukov <pavel.zhukov@huawei.com>
Upstream status: Backport
Upstream commit: d4bd9d748a4223856bf92dd35ca088d1f319d189

Eilís Ní Fhlannagáin authored 3 years ago and Eilís Ní Fhlannagáin committed 3 years ago

Looking at allscenarios-image-common.inc I see some devel/dbg packages
in there. These really should be pulled into a development or debug
image as images that endusers would build off of for a production
environment should only contain the minimal packages needed to run the system.

This patch removes gdbserver and packagegroup-net-tools (iperf3) from common
and puts them along with other useful EXTRA_IMAGE_FEATURES into two new images:

allscenarios-image-base-dev
allscenarios-image-extra-dev

Due to the size of the dbg-pkgs and dev-pkgs,
allscenarios-image-extra-dev needs a bump of it's ROOT_PARTITION_SIZE
else wic creation explodes.

Closes <issues 123>

Signed-off-by: Eilís Ní Fhlannagáin <elizabeth.flanagan@huawei.com>

The cache is relatively network-heavy, as it attempts to check if one of
myriad of cache files is available and is somewhat misleading, since the
cache only works for the small subset of configurations that have been
cleared for legal re-distribution and have a public cache available.

Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@huawei.com>

SystemOTA depends on RAUC. The meta-rauc repository was added to the
manifest earlier [1], and now needs to participate in the default build
configuration process.

[1] https://git.ostc-eu.org/OSTC/OHOS/manifest/-/merge_requests/127



Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@huawei.com>

Add meta-riscv to bblayers.conf.sample to enable RISC-V support
in all ASOS builds

Signed-off-by: Bernhard Rosenkränzer <bernhard.rosenkraenzer.ext@huawei.com>

Santeri Salko authored 3 years ago and Stefan Schmidt committed 3 years ago

OP-TEE recipes are taken from Linaro repo.

Signed-off-by: Santeri Salko <santeri.salko@huawei.com>

Add the meta-security layer with its dependencies. Meta security offers
configuration and tools for distribution hardening and tests.

Signed-off-by: Marta Rybczynska <marta.rybczynska@huawei.com>

Ever since we've landed
https://git.ostc-eu.org/OSTC/OHOS/meta-ohos/-/merge_requests/147 the way
to invoke `runqemu` has changed slightly. Update stale documentation
sections that were left out.

Closes: https://git.ostc-eu.org/OSTC/OHOS/meta-ohos/-/issues/67


Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@huawei.com>

changes are needed in the following files:
flavours/zephyr/conf-notes.txt
flavours/zephyr/local.conf.sample

Signed-off-by: Nagesh Shamnur <nagesh.shamnur@huawei.com>

The OS will start to depend on a specific partition table and having to
maintain multiple qemu setups might not prove useful. Also, we have
encountered issues trying to boot wic images (disk images as opposed to
root filesystems) with qemu ARM machines.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

This distro configuration only really applies on Linux builds. We have
set it for other kernels in the past to workaround some bugs - fixes
were upstreamed in the meanwhile. So we can remove all these from our
local.conf samples.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Add relevant MACHINE entry in local.conf.sample of the Zephyr
flavour and metion it in configuration notes displayed
after sourcing the env with TEMPLATECONF.

Closes: OSTC/planning/core-os#168

Signed-off-by: Wojciech Zmuda <wojciech.zmuda@huawei.com>

This bundles a rather large rename of all the recipes, descriptions and
comments, with the exception of repositories referenced from gitee or
other third party system (e.g. launchpad PPAs or COPR repositories).

Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

We use this layer to store temporary fixes while upstream catches up.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Allow using the clang 12 based toolchain

Signed-off-by: Bernhard Rosenkränzer <bernhard.rosenkraenzer.ext@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

OSTC now publishes a complete sstate-cache and download cache for
a set of builds and configurations. Using those caches can dramatically
speed up setting up the development environment by avoiding huge source
downloads (about 12GB at the time of this writing) and virtually all of
the compilation (close to an hour on a 6 core 8th gen Intel mobile CPU)
at the cost of miniscule sstate cache download (on the order of one
gigabyte).

The setting is added at the bottom of local.conf, where it is easier to
spot and disable, if desired.

Signed-off-by: Zygmunt Krynicki <zygmunt.krynicki@huawei.com>

These machines are not as of now in the scope of the project. We remove
them from the local.conf samples to not leave room for confusion. This
aligns the qemu set of supported targets with `conf-notes.txt` and
general documentation too.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Wojciech Zmuda authored 4 years ago and Andrei Gherzan committed 4 years ago

Strong (=) assignment makes it impossible to override DISTRO
in command line when calling bitbake e.g.:

  $ DISTRO=myCoolOS bitbake myCoolImage

With strong assignment, the local.conf DISTRO setting has
precendence over command line setting. Using weak assignment
allows user to build other DISTRO without editing local.conf.

Signed-off-by: Wojciech Zmuda <wojciech.zmuda@huawei.com>

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Our bblayers file diverged between the different flavours and e.g. the
meta-ohos-foundation was still present for zephyr and freertos.

We enable all layers on all flavours. The only overhead should be in
parsing the recipes. If something else breaks we consider this a bug
worth fixing.

The usage of symlinks should be safe here. Yocto buildhost will almost
always be Linux based, but it this should even work on Windows by now.
If we run into trouble with this we can always got back to three files.

Signed-off-by: Stefan Schmidt <stefan.schmidt@huawei.com>

Since https://git.ostc-eu.org/OSTC/OHOS/meta-av96/-/merge_requests/4


it is no longer needed.

Signed-off-by: Zbigniew Bodek <zbigniew.bodek@huawei.com>

The BSP layer is now a subdirectory - meta-av96-core.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

The layer was restructured and all the BSP support is now provided
through the machine configuration.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Add meta-qt5, new dependency layer of meta-av96.

Signed-off-by: Zbigniew Bodek <zbigniew.bodek@huawei.com>

This will include definitions and info for useful variables like DL_DIR,
SSTATE_DIR etc.

Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>

Add general description of MACHINE and add bblayers to template.

Signed-off-by: Ettore Chimenti <ettore.chimenti@seco.com>

Signed-off-by: Robert Drab <robert.drab@huawei.com>

meta-ohos-foundation is currently unused, therefore it should not
be included in the bblayers.conf.sample file.

meta-ohos-acts layer contains recipes for building OHOS tests.

Signed-off-by: Robert Drab <robert.drab@huawei.com>

Make a default machine first on the list and in bold (in README.md)
to avoid ambiguity.

Signed-off-by: Robert Drab <robert.drab@huawei.com>

zephyr is no longer preferred, default DISTRO. Change it
to openharmony-zephyr.

Signed-off-by: Zbigniew Bodek <zbigniew.bodek@huawei.com>

meta-ohos-core contains DISTRO configurations that
may be used by Zephyr build. In the future some images
also may be added.

Signed-off-by: Zbigniew Bodek <zbigniew.bodek@huawei.com>

Poky is no longer correct default DISTRO. Change it
to openharmony-linux.

Signed-off-by: Zbigniew Bodek <zbigniew.bodek@huawei.com>

Add missing boards to the supported boards list.

Add missing hyphen in `runqemu` command.

Signed-off-by: Wojciech Zmuda <wojciech.zmuda@huawei.com>

Explicitly setting `DEPLOY_DIR_IMAGE` is not needed, since we have
`TEMPLATECONF`.
Setting `TEMPLATECONF` on the `source` step makes both `bitbake` and
`runqemu` steps share the same `DISTRO` setting, which sets
`DEPLOY_DIR_IMAGE` properly. Remove it from readme and conf-notes shown
after sourcing the env.

Signed-off-by: Wojciech Zmuda <wojciech.zmuda@huawei.com>

Since the default images have changed, switch to
the new ones recommended for OpenHarmony.

Signed-off-by: Zbigniew Bodek <zbigniew.bodek@huawei.com>