Select Git revision
Search by author
- Any Author
- authors
-
Adam Szpilko aszpilko
-
Alberto Pianon alpianon
-
Amit Kucheria
idlethread
-
Andrei Gherzan
agherzan
-
Antonio Miele miele
-
Artem Kondratiuk artemkondratiuk
-
Bernhard Rosenkränzer bero
-
Carlo Piana
cpiana
-
Chase Qi chaseqi
-
Davide Gardenal tony3oo3
-
Davide Ricci
dricci783
-
Eclipse Webmaster webmaster
-
Esben Haabendal esben
-
Ettore Chimenti
ektor5
-
Francesco Pham
mrfrank
-
Grzegorz Gwóźdź gwozdzcfs
-
Gururaj Shetty shettygururaj
-
Jacopo Zorzetto jacopo
-
Jaroslaw Marek
jmarek
-
Jianyu Liu
l86740
- Oct 20, 2021
-
-
Sasha Levin authored
Signed-off-by:Sasha Levin <sashal@kernel.org>
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20211018132340.682786018@linuxfoundation.org Tested-by:
Fox Chen <foxhlchen@gmail.com> Tested-by:
Shuah Khan <skhan@linuxfoundation.org> Tested-by:
Florian Fainelli <f.fainelli@gmail.com> Tested-by:
Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20211019061402.629202866@linuxfoundation.org Tested-by:
Linux Kernel Functional Testing <lkft@linaro.org> Tested-by:
Salvatore Bonaccorso <carnil@debian.org> Tested-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Shannon Nelson authored
commit 5c976a56 upstream. Bridging, and possibly other upper stack gizmos, adds the lower device's netdev->dev_addr to its own uc list, and then requests it be deleted when the upper bridge device is removed. This delete request also happens with the bridging vlan_filtering is enabled and then disabled. Bonding has a similar behavior with the uc list, but since it also uses set_mac to manage netdev->dev_addr, it doesn't have the same the failure case. Because we store our netdev->dev_addr in our uc list, we need to ignore the delete request from dev_uc_sync so as to not lose the address and all hope of communicating. Note that ndo_set_mac_address is expressly changing netdev->dev_addr, so no limitation is set there. Fixes: 2a654540 ("ionic: Add Rx filter and rx_mode ndo support") Signed-off-by:
Shannon Nelson <snelson@pensando.io> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Vladimir Oltean authored
commit 8d5f7954 upstream. The NXP LS1028A switch has two Ethernet ports towards the CPU, but only one of them is capable of acting as an NPI port at a time (inject and extract packets using DSA tags). However, using the alternative ocelot-8021q tagging protocol, it should be possible to use both CPU ports symmetrically, but for that we need to mark both ports in the device tree as DSA masters. In the process of doing that, it can be seen that traffic to/from the network stack gets broken, and this is because the Felix driver iterates through all DSA CPU ports and configures them as NPI ports. But since there can only be a single NPI port, we effectively end up in a situation where DSA thinks the default CPU port is the first one, but the hardware port configured to be an NPI is the last one. I would like to treat this as a bug, because if the updated device trees are going to start circulating, it would be really good for existing kernels to support them, too. Fixes: adb3dccf ("net: dsa: felix: convert to the new .change_tag_protocol DSA API") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Vladimir Oltean authored
commit ebb4c6a9 upstream. The sad reality is that when a PTP frame with a TX timestamping request is transmitted, it isn't guaranteed that it will make it all the way to the wire (due to congestion inside the switch), and that a timestamp will be taken by the hardware and placed in the timestamp FIFO where an IRQ will be raised for it. The implication is that if enough PTP frames are silently dropped by the hardware such that the timestamp ID has rolled over, it is possible to match a timestamp to an old skb. Furthermore, nobody will match on the real skb corresponding to this timestamp, since we stupidly matched on a previous one that was stale in the queue, and stopped there. So PTP timestamping will be broken and there will be no way to recover. It looks like the hardware parses the sequenceID from the PTP header, and also provides that metadata for each timestamp. The driver currently ignores this, but it shouldn't. As an extra resiliency measure, do the following: - check whether the PTP sequenceID also matches between the skb and the timestamp, treat the skb as stale otherwise and free it - if we see a stale skb, don't stop there and try to match an skb one more time, chances are there's one more skb in the queue with the same timestamp ID, otherwise we wouldn't have ever found the stale one (it is by timestamp ID that we matched it). While this does not prevent PTP packet drops, it at least prevents the catastrophic consequences of incorrect timestamp matching. Since we already call ptp_classify_raw in the TX path, save the result in the skb->cb of the clone, and just use that result in the interrupt code path. Fixes: 4e3b0468 ("net: mscc: PTP Hardware Clock (PHC) support") Signed-off-by:
-
Vladimir Oltean authored
commit fba01283 upstream. It appears that Ocelot switches cannot timestamp non-PTP frames, I tested this using the isochron program at: https://github.com/vladimiroltean/tsn-scripts with the result that the driver increments the ocelot_port->ts_id counter as expected, puts it in the REW_OP, but the hardware seems to not timestamp these packets at all, since no IRQ is emitted. Therefore check whether we are sending PTP frames, and refuse to populate REW_OP otherwise. Fixes: 4e3b0468 ("net: mscc: PTP Hardware Clock (PHC) support") Signed-off-by:
-
Vladimir Oltean authored
commit 9fde506e upstream. When skb_match is NULL, it means we received a PTP IRQ for a timestamp ID that the kernel has no idea about, since there is no skb in the timestamping queue with that timestamp ID. This is a grave error and not something to just "continue" over. So print a big warning in case this happens. Also, move the check above ocelot_get_hwtimestamp(), there is no point in reading the full 64-bit current PTP time if we're not going to do anything with it anyway for this skb. Fixes: 4e3b0468 ("net: mscc: PTP Hardware Clock (PHC) support") Signed-off-by:
-
Vladimir Oltean authored
commit 52849bcf upstream. PTP packets with 2-step TX timestamp requests are matched to packets based on the egress port number and a 6-bit timestamp identifier. All PTP timestamps are held in a common FIFO that is 128 entry deep. This patch ensures that back-to-back timestamping requests cannot exceed the hardware FIFO capacity. If that happens, simply send the packets without requesting a TX timestamp to be taken (in the case of felix, since the DSA API has a void return code in ds->ops->port_txtstamp) or drop them (in the case of ocelot). I've moved the ts_id_lock from a per-port basis to a per-switch basis, because we need separate accounting for both numbers of PTP frames in flight. And since we need locking to inc/dec the per-switch counter, that also offers protection for the per-port counter and hence there is no reason to have a per-port counter anymore. Fixes: 4e3b0468 ("net: mscc: PTP Hardware Clock (PHC) support") Signed-off-by:
-
Vladimir Oltean authored
commit c57fe003 upstream. At present, there is a problem when user space bombards a port with PTP event frames which have TX timestamping requests (or when a tc-taprio offload is installed on a port, which delays the TX timestamps by a significant amount of time). The driver will happily roll over the 2-bit timestamp ID and this will cause incorrect matches between an skb and the TX timestamp collected from the FIFO. The Ocelot switches have a 6-bit PTP timestamp identifier, and the value 63 is reserved, so that leaves identifiers 0-62 to be used. The timestamp identifiers are selected by the REW_OP packet field, and are actually shared between CPU-injected frames and frames which match a VCAP IS2 rule that modifies the REW_OP. The hardware supports partitioning between the two uses of the REW_OP field through the PTP_ID_LOW and PTP_ID_HIGH registers, and by default reserves the PTP IDs 0-3 for CPU-injected traffic and the rest for VCAP IS2. The driver does not use VCAP IS2 to set REW_OP for 2-step timestamping, and it also writes 0xffffffff to both PTP_ID_HIGH and PTP_ID_LOW in ocelot_init_timestamp() which makes all timestamp identifiers available to CPU injection. Therefore, we can make use of all 63 timestamp identifiers, which should allow more timestampable packets to be in flight on each port. This is only part of the solution, more issues will be addressed in future changes. Fixes: 4e3b0468 ("net: mscc: PTP Hardware Clock (PHC) support") Signed-off-by:
-
Baowen Zheng authored
commit 60d950f4 upstream. In commit 74fc4f82 ("net: Fix offloading indirect devices dependency on qdisc order creation"), it adds a process to trigger the callback to setup the bo callback when the driver regists a callback. In our current implement, we are not ready to run the callback when nfp call the function flow_indr_dev_register, then there will be error message as: kernel: Oops: 0000 [#1] SMP PTI kernel: CPU: 0 PID: 14119 Comm: kworker/0:0 Tainted: G kernel: Workqueue: events work_for_cpu_fn kernel: RIP: 0010:nfp_flower_indr_setup_tc_cb+0x258/0x410 kernel: RSP: 0018:ffffbc1e02c57bf8 EFLAGS: 00010286 kernel: RAX: 0000000000000000 RBX: ffff9c761fabc000 RCX: 0000000000000001 kernel: RDX: 0000000000000001 RSI: fffffffffffffff0 RDI: ffffffffc0be9ef1 kernel: RBP: ffffbc1e02c57c58 R08: ffffffffc08f33aa R09: ffff9c6db7478800 kernel: R10: 0000009c003f6e00 R11: ffffbc1e02800000 R12: ffffbc1e000d9000 kernel: R13: ffffbc1e000db428 R14: ffff9c6db7478800 R15: ffff9c761e884e80 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: fffffffffffffff0 CR3: 00000009e260a004 CR4: 00000000007706f0 kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 kernel: PKRU: 55555554 kernel: Call Trace: kernel: ? flow_indr_dev_register+0xab/0x210 kernel: ? __cond_resched+0x15/0x30 kernel: ? kmem_cache_alloc_trace+0x44/0x4b0 kernel: ? nfp_flower_setup_tc+0x1d0/0x1d0 [nfp] kernel: flow_indr_dev_register+0x158/0x210 kernel: ? tcf_block_unbind+0xe0/0xe0 kernel: nfp_flower_init+0x40b/0x650 [nfp] kernel: nfp_net_pci_probe+0x25f/0x960 [nfp] kernel: ? nfp_rtsym_read_le+0x76/0x130 [nfp] kernel: nfp_pci_probe+0x6a9/0x820 [nfp] kernel: local_pci_probe+0x45/0x80 So we need to call flow_indr_dev_register in app start process instead of init stage. Fixes: 74fc4f82 ("net: Fix offloading indirect devices dependency on qdisc order creation") Signed-off-by:
Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
Louis Peens <louis.peens@corigine.com> Link: https://lore.kernel.org/r/20211012124850.13025-1-louis.peens@corigine.com Signed-off-by:
-
Dan Carpenter authored
commit 7904022d upstream. These variables are printed on the error path if match_int() fails so they have to be initialized. Fixes: 2958a995 ("block/rnbd-clt: Support polling mode for IO latency optimization") Fixes: 1eb54f8f ("block/rnbd: client: sysfs interface functions") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Gioh Kim <gi-oh.kim@ionos.com> Link: https://lore.kernel.org/r/20211012084443.GA31472@kili Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Jacob Keller authored
commit 4d4a223a upstream. Commit 4dd0d5c3 ("ice: add lock around Tx timestamp tracker flush") added a lock around the Tx timestamp tracker flow which is used to cleanup any left over SKBs and prepare for device removal. This lock is problematic because it is being held around a call to ice_clear_phy_tstamp. The clear function takes a mutex to send a PHY write command to firmware. This could lead to a deadlock if the mutex actually sleeps, and causes the following warning on a kernel with preemption debugging enabled: [ 715.419426] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:573 [ 715.427900] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 3100, name: rmmod [ 715.435652] INFO: lockdep is turned off. [ 715.439591] Preemption disabled at: [ 715.439594] [<0000000000000000>] 0x0 [ 715.446678] CPU: 52 PID: 3100 Comm: rmmod Tainted: G W OE 5.15.0-rc4+ #42 bdd7ec3018e725f159ca0d372ce8c2c0e784891c [ 715.458058] Hardware name: Intel Corporation S2600STQ/S2600STQ, BIOS SE5C620.86B.02.01.0010.010620200716 01/06/2020 [ 715.468483] Call Trace: [ 715.470940] dump_stack_lvl+0x6a/0x9a [ 715.474613] ___might_sleep.cold+0x224/0x26a [ 715.478895] __mutex_lock+0xb3/0x1440 [ 715.482569] ? stack_depot_save+0x378/0x500 [ 715.486763] ? ice_sq_send_cmd+0x78/0x14c0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.494979] ? kfree+0xc1/0x520 [ 715.498128] ? mutex_lock_io_nested+0x12a0/0x12a0 [ 715.502837] ? kasan_set_free_info+0x20/0x30 [ 715.507110] ? __kasan_slab_free+0x10b/0x140 [ 715.511385] ? slab_free_freelist_hook+0xc7/0x220 [ 715.516092] ? kfree+0xc1/0x520 [ 715.519235] ? ice_deinit_lag+0x16c/0x220 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.527359] ? ice_remove+0x1cf/0x6a0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.535133] ? pci_device_remove+0xab/0x1d0 [ 715.539318] ? __device_release_driver+0x35b/0x690 [ 715.544110] ? driver_detach+0x214/0x2f0 [ 715.548035] ? bus_remove_driver+0x11d/0x2f0 [ 715.552309] ? pci_unregister_driver+0x26/0x250 [ 715.556840] ? ice_module_exit+0xc/0x2f [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.564799] ? __do_sys_delete_module.constprop.0+0x2d8/0x4e0 [ 715.570554] ? do_syscall_64+0x3b/0x90 [ 715.574303] ? entry_SYSCALL_64_after_hwframe+0x44/0xae [ 715.579529] ? start_flush_work+0x542/0x8f0 [ 715.583719] ? ice_sq_send_cmd+0x78/0x14c0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.591923] ice_sq_send_cmd+0x78/0x14c0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.599960] ? wait_for_completion_io+0x250/0x250 [ 715.604662] ? lock_acquire+0x196/0x200 [ 715.608504] ? do_raw_spin_trylock+0xa5/0x160 [ 715.612864] ice_sbq_rw_reg+0x1e6/0x2f0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.620813] ? ice_reset+0x130/0x130 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.628497] ? __debug_check_no_obj_freed+0x1e8/0x3c0 [ 715.633550] ? trace_hardirqs_on+0x1c/0x130 [ 715.637748] ice_write_phy_reg_e810+0x70/0xf0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.646220] ? do_raw_spin_trylock+0xa5/0x160 [ 715.650581] ? ice_ptp_release+0x910/0x910 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.658797] ? ice_ptp_release+0x255/0x910 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.667013] ice_clear_phy_tstamp+0x2c/0x110 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.675403] ice_ptp_release+0x408/0x910 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.683440] ice_remove+0x560/0x6a0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.691037] ? _raw_spin_unlock_irqrestore+0x46/0x73 [ 715.696005] pci_device_remove+0xab/0x1d0 [ 715.700018] __device_release_driver+0x35b/0x690 [ 715.704637] driver_detach+0x214/0x2f0 [ 715.708389] bus_remove_driver+0x11d/0x2f0 [ 715.712489] pci_unregister_driver+0x26/0x250 [ 715.716857] ice_module_exit+0xc/0x2f [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.724637] __do_sys_delete_module.constprop.0+0x2d8/0x4e0 [ 715.730210] ? free_module+0x6d0/0x6d0 [ 715.733963] ? task_work_run+0xe1/0x170 [ 715.737803] ? exit_to_user_mode_loop+0x17f/0x1d0 [ 715.742509] ? rcu_read_lock_sched_held+0x12/0x80 [ 715.747215] ? trace_hardirqs_on+0x1c/0x130 [ 715.751401] do_syscall_64+0x3b/0x90 [ 715.754981] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 715.760033] RIP: 0033:0x7f4dfe59000b [ 715.763612] Code: 73 01 c3 48 8b 0d 6d 1e 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 3d 1e 0c 00 f7 d8 64 89 01 48 [ 715.782357] RSP: 002b:00007ffe8c891708 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ 715.789923] RAX: ffffffffffffffda RBX: 00005558a20468b0 RCX: 00007f4dfe59000b [ 715.797054] RDX: 000000000000000a RSI: 0000000000000800 RDI: 00005558a2046918 [ 715.804189] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [ 715.811319] R10: 00007f4dfe603ac0 R11: 0000000000000206 R12: 00007ffe8c891940 [ 715.818455] R13: 00007ffe8c8920a3 R14: 00005558a20462a0 R15: 00005558a20468b0 Notice that this is the only case where we use the lock in this way. In the cleanup kthread and work kthread the lock is only taken around the bit accesses. This was done intentionally to avoid this kind of issue. The way the lock is used, we only protect ordering of bit sets vs bit clears. The Tx writers in the hot path don't need to be protected against the entire kthread loop. The Tx queues threads only need to ensure that they do not re-use an index that is currently in use. The cleanup loop does not need to block all new set bits, since it will re-queue itself if new timestamps are present. Fix the tracker flow so that it uses the same flow as the standard cleanup thread. In addition, ensure the in_use bitmap actually gets cleared properly. This fixes the warning and also avoids the potential deadlock that might have occurred otherwise. Fixes: 4dd0d5c3 ("ice: add lock around Tx timestamp tracker flush") Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
-
Vegard Nossum authored
commit 9973a430 upstream. Fix the following build/link errors by adding a dependency on CRYPTO, CRYPTO_HASH, CRYPTO_SHA256 and CRC32: ld: drivers/net/usb/r8152.o: in function `rtl8152_fw_verify_checksum': r8152.c:(.text+0x2b2a): undefined reference to `crypto_alloc_shash' ld: r8152.c:(.text+0x2bed): undefined reference to `crypto_shash_digest' ld: r8152.c:(.text+0x2c50): undefined reference to `crypto_destroy_tfm' ld: drivers/net/usb/r8152.o: in function `_rtl8152_set_rx_mode': r8152.c:(.text+0xdcb0): undefined reference to `crc32_le' Fixes: 9370f2d0 ("r8152: support request_firmware for RTL8153") Fixes: ac718b69 ("net/usb: new driver for RTL8152") Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by:
-
chongjiapeng authored
commit a5a14ea7 upstream. The error code is missing in this code scenario, add the error code '-EINVAL' to the return value 'rc'. Eliminate the follow smatch warning: drivers/net/ethernet/qlogic/qed/qed_main.c:1298 qed_slowpath_start() warn: missing error code 'rc'. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Fixes: d51e4af5 ("qed: aRFS infrastructure support") Signed-off-by:
chongjiapeng <jiapeng.chong@linux.alibaba.com> Signed-off-by:
-
Paolo Abeni authored
commit 612f71d7 upstream. recvmsg() can enter an infinite loop if the caller provides the MSG_WAITALL, the data present in the receive queue is not sufficient to fulfill the request, and no more data is received by the peer. When the above happens, mptcp_wait_data() will always return with no wait, as the MPTCP_DATA_READY flag checked by such function is set and never cleared in such code path. Leveraging the above syzbot was able to trigger an RCU stall: rcu: INFO: rcu_preempt self-detected stall on CPU rcu: 0-...!: (10499 ticks this GP) idle=0af/1/0x4000000000000000 softirq=10678/10678 fqs=1 (t=10500 jiffies g=13089 q=109) rcu: rcu_preempt kthread starved for 10497 jiffies! g13089 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=1 rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior. rcu: RCU grace-period kthread stack dump: task:rcu_preempt state:R running task stack:28696 pid: 14 ppid: 2 flags:0x00004000 Call Trace: context_switch kernel/sched/core.c:4955 [inline] __schedule+0x940/0x26f0 kernel/sched/core.c:6236 schedule+0xd3/0x270 kernel/sched/core.c:6315 schedule_timeout+0x14a/0x2a0 kernel/time/timer.c:1881 rcu_gp_fqs_loop+0x186/0x810 kernel/rcu/tree.c:1955 rcu_gp_kthread+0x1de/0x320 kernel/rcu/tree.c:2128 kthread+0x405/0x4f0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 rcu: Stack dump where RCU GP kthread last ran: Sending NMI from CPU 0 to CPUs 1: NMI backtrace for cpu 1 CPU: 1 PID: 8510 Comm: syz-executor827 Not tainted 5.15.0-rc2-next-20210920-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:bytes_is_nonzero mm/kasan/generic.c:84 [inline] RIP: 0010:memory_is_nonzero mm/kasan/generic.c:102 [inline] RIP: 0010:memory_is_poisoned_n mm/kasan/generic.c:128 [inline] RIP: 0010:memory_is_poisoned mm/kasan/generic.c:159 [inline] RIP: 0010:check_region_inline mm/kasan/generic.c:180 [inline] RIP: 0010:kasan_check_range+0xc8/0x180 mm/kasan/generic.c:189 Code: 38 00 74 ed 48 8d 50 08 eb 09 48 83 c0 01 48 39 d0 74 7a 80 38 00 74 f2 48 89 c2 b8 01 00 00 00 48 85 d2 75 56 5b 5d 41 5c c3 <48> 85 d2 74 5e 48 01 ea eb 09 48 83 c0 01 48 39 d0 74 50 80 38 00 RSP: 0018:ffffc9000cd676c8 EFLAGS: 00000283 RAX: ffffed100e9a110e RBX: ffffed100e9a110f RCX: ffffffff88ea062a RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff888074d08870 RBP: ffffed100e9a110e R08: 0000000000000001 R09: ffff888074d08877 R10: ffffed100e9a110e R11: 0000000000000000 R12: ffff888074d08000 R13: ffff888074d08000 R14: ffff888074d08088 R15: ffff888074d08000 FS: 0000555556d8e300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 S: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000180 CR3: 0000000068909000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: instrument_atomic_read_write include/linux/instrumented.h:101 [inline] test_and_clear_bit include/asm-generic/bitops/instrumented-atomic.h:83 [inline] mptcp_release_cb+0x14a/0x210 net/mptcp/protocol.c:3016 release_sock+0xb4/0x1b0 net/core/sock.c:3204 mptcp_wait_data net/mptcp/protocol.c:1770 [inline] mptcp_recvmsg+0xfd1/0x27b0 net/mptcp/protocol.c:2080 inet6_recvmsg+0x11b/0x5e0 net/ipv6/af_inet6.c:659 sock_recvmsg_nosec net/socket.c:944 [inline] ____sys_recvmsg+0x527/0x600 net/socket.c:2626 ___sys_recvmsg+0x127/0x200 net/socket.c:2670 do_recvmmsg+0x24d/0x6d0 net/socket.c:2764 __sys_recvmmsg net/socket.c:2843 [inline] __do_sys_recvmmsg net/socket.c:2866 [inline] __se_sys_recvmmsg net/socket.c:2859 [inline] __x64_sys_recvmmsg+0x20b/0x260 net/socket.c:2859 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fc200d2dc39 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 41 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffc5758e5a8 EFLAGS: 00000246 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fc200d2dc39 RDX: 0000000000000002 RSI: 00000000200017c0 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000f0b5ff R10: 0000000000000100 R11: 0000000000000246 R12: 0000000000000003 R13: 00007ffc5758e5d0 R14: 00007ffc5758e5c0 R15: 0000000000000003 Fix the issue by replacing the MPTCP_DATA_READY bit with direct inspection of the msk receive queue. Reported-and-tested-by:
<syzbot+3360da629681aa0d22fe@syzkaller.appspotmail.com> Fixes: 7a6a6cbc ("mptcp: recvmsg() can drain data from multiple subflow") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Sebastian Andrzej Siewior authored
commit 14132690 upstream. Introduction of lockless subqueues broke the class statistics. Before the change stats were accumulated in `bstats' and `qstats' on the stack which was then copied to struct gnet_dump. After the change the `bstats' and `qstats' are initialized to 0 and never updated, yet still fed to gnet_dump. The code updates the global qdisc->cpu_bstats and qdisc->cpu_qstats instead, clobbering them. Most likely a copy-paste error from the code in mqprio_dump(). __gnet_stats_copy_basic() and __gnet_stats_copy_queue() accumulate the values for per-CPU case but for global stats they overwrite the value, so only stats from the last loop iteration / tc end up in sch->[bq]stats. Use the on-stack [bq]stats variables again and add the stats manually in the global case. Fixes: ce679e8d ("net: sched: add support for TCQ_F_NOLOCK subqueues to sch_mqprio") Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> https://lore.kernel.org/all/20211007175000.2334713-2-bigeasy@linutronix.de/ Signed-off-by:
-
Prashant Malani authored
commit 41512e4d upstream. The macro IPC_TIMEOUT is already in jiffies (it is also used like that elsewhere in the file when calling wait_for_completion_timeout()). Don’t convert it using helper functions for the purposes of calculating the busy loop expiry time. Fixes: e7b7ab38 (“platform/x86: intel_scu_ipc: Sleeping is fine when polling”) Signed-off-by:
Prashant Malani <pmalani@chromium.org> Cc: Benson Leung <bleung@chromium.org> Reviewed-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20210928101932.2543937-2-pmalani@chromium.org Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Jackie Liu authored
commit 596143e3 upstream. Fix modpost Section mismatch error in next_platform_timer(). [...] WARNING: modpost: vmlinux.o(.text.unlikely+0x26e60): Section mismatch in reference from the function next_platform_timer() to the variable .init.data:acpi_gtdt_desc The function next_platform_timer() references the variable __initdata acpi_gtdt_desc. This is often because next_platform_timer lacks a __initdata annotation or the annotation of acpi_gtdt_desc is wrong. WARNING: modpost: vmlinux.o(.text.unlikely+0x26e64): Section mismatch in reference from the function next_platform_timer() to the variable .init.data:acpi_gtdt_desc The function next_platform_timer() references the variable __initdata acpi_gtdt_desc. This is often because next_platform_timer lacks a __initdata annotation or the annotation of acpi_gtdt_desc is wrong. ERROR: modpost: Section mismatches detected. Set CONFIG_SECTION_MISMATCH_WARN_ONLY=y to allow them. make[1]: *** [scripts/Makefile.modpost:59: vmlinux.symvers] Error 1 make[1]: *** Deleting file 'vmlinux.symvers' make: *** [Makefile:1176: vmlinux] Error 2 [...] Fixes: a712c3ed ("acpi/arm64: Add memory-mapped timer support in GTDT driver") Signed-off-by:
Jackie Liu <liuyun01@kylinos.cn> Acked-by:
Hanjun Guo <guohanjun@huawei.com> Link: https://lore.kernel.org/r/20210823092526.2407526-1-liu.yun@linux.dev Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Dan Carpenter authored
commit c8f01ffc upstream. This disables a lock which wasn't enabled and it does not disable the first lock in the array. Fixes: 6e0eb52e ("drm/msm/dsi: Parse bus clocks from a list") Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20211001123409.GG2283@kili Signed-off-by:
Rob Clark <robdclark@chromium.org> Signed-off-by:
-
Dan Carpenter authored
commit 739b4e77 upstream. Return an error code if msm_dsi_manager_validate_current_config(). Don't return success. Fixes: 8b03ad30 ("drm/msm/dsi: Use one connector for dual DSI mode") Signed-off-by:
-
Marijn Suijten authored
commit 90b7c1c6 upstream. The downstream driver models this PLL lock check as an if-elseif-else. The only way to reach the else case where pll_locked=true [1] is by succeeding both readl_poll_timeout_atomic calls (which return zero on success) in the if _and_ elseif condition. Hence both the "lock" and "ready" bit need to be tested in the SM_READY_STATUS register before considering the PLL locked and ready to go. Tested on the Sony Xperia XA2 Ultra (nile-discovery, sdm630). [1]: https://source.codeaurora.org/quic/la/kernel/msm-4.19/tree/drivers/clk/qcom/mdss/mdss-dsi-pll-14nm-util.c?h=LA.UM.9.2.1.r1-08000-sdm660.0#n302 Fixes: f079f6d9 ("drm/msm/dsi: Add PHY/PLL for 8x96") Signed-off-by:
Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by:
-
Dan Carpenter authored
commit 3eda9019 upstream. These error paths returned 1 on failure, instead of a negative error code. This would lead to an Oops in the caller. A second problem is that the check for "if (ret != -ENODATA)" did not work because "ret" was set to 1. Fixes: 5785dd7a ("drm/msm: Fix duplicate gpu node in icc summary") Signed-off-by:
-
Dan Carpenter authored
commit 980d74e7 upstream. This code returns 1 on error instead of a negative error. It leads to an Oops in the caller. A second problem is that the check for "if (ret != -ENODATA)" cannot be true because "ret" is set to 1. Fixes: 5785dd7a ("drm/msm: Fix duplicate gpu node in icc summary") Signed-off-by:
-
Rob Clark authored
commit 14eb0cb4 upstream. In theory a context can be destroyed and a new one allocated at the same address, making the pointer comparision to detect when we don't need to update the current pagetables invalid. Instead assign a sequence number to each context on creation, and use this for the check. Fixes: 84c31ee1 ("drm/msm/a6xx: Add support for per-instance pagetables") Signed-off-by:
-
Arnd Bergmann authored
commit 95c58291 upstream. The overflow check does causes a warning from clang-14 when 'sz' is a type that is smaller than size_t: drivers/gpu/drm/msm/msm_gem_submit.c:217:10: error: result of comparison of constant 18446744073709551615 with expression of type 'unsigned int' is always false [-Werror,-Wtautological-constant-out-of-range-compare] if (sz == SIZE_MAX) { Change the type accordingly. Fixes: 20224d71 ("drm/msm/submit: Move copy_from_user ahead of locking bos") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20210927113632.3849987-1-arnd@kernel.org Signed-off-by:
-
Dmitry Baryshkov authored
commit c491a0c7 upstream. Since f35a2a99 ("drm/encoder: make encoder control functions optional") drm_mode_config_validate would print warnings if both cursor plane and cursor functions are provided. Restore separate set of drm_crtc_funcs to be used if separate cursor plane is provided. [ 6.556046] ------------[ cut here ]------------ [ 6.556071] [CRTC:93:crtc-0] must not have both a cursor plane and a cursor_set func [ 6.556091] WARNING: CPU: 1 PID: 76 at drivers/gpu/drm/drm_mode_config.c:648 drm_mode_config_validate+0x238/0x4d0 [ 6.567453] Modules linked in: [ 6.577604] CPU: 1 PID: 76 Comm: kworker/u8:2 Not tainted 5.15.0-rc1-dirty #43 [ 6.580557] Hardware name: Qualcomm Technologies, Inc. DB820c (DT) [ 6.587763] Workqueue: events_unbound deferred_probe_work_func [ 6.593926] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 6.599740] pc : drm_mode_config_validate+0x238/0x4d0 [ 6.606596] lr : drm_mode_config_validate+0x238/0x4d0 [ 6.611804] sp : ffff8000121b3980 [ 6.616838] x29: ffff8000121b3990 x28: 0000000000000000 x27: 0000000000000001 [ 6.620140] x26: ffff8000114cde50 x25: ffff8000114cdd40 x24: ffff0000987282d8 [ 6.627258] x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000001 [ 6.634376] x20: ffff000098728000 x19: ffff000080a39000 x18: ffffffffffffffff [ 6.641494] x17: 3136564e3631564e x16: 0000000000000324 x15: ffff800011c78709 [ 6.648613] x14: 0000000000000000 x13: ffff800011a22850 x12: 00000000000009ab [ 6.655730] x11: 0000000000000339 x10: ffff800011a22850 x9 : ffff800011a22850 [ 6.662848] x8 : 00000000ffffefff x7 : ffff800011a7a850 x6 : ffff800011a7a850 [ 6.669966] x5 : 000000000000bff4 x4 : 40000000fffff339 x3 : 0000000000000000 [ 6.677084] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff00008093b800 [ 6.684205] Call trace: [ 6.691319] drm_mode_config_validate+0x238/0x4d0 [ 6.693577] drm_dev_register+0x17c/0x210 [ 6.698435] msm_drm_bind+0x4b4/0x694 [ 6.702429] try_to_bring_up_master+0x164/0x1d0 [ 6.706075] __component_add+0xa0/0x170 [ 6.710415] component_add+0x14/0x20 [ 6.714234] msm_hdmi_dev_probe+0x1c/0x2c [ 6.718053] platform_probe+0x68/0xe0 [ 6.721959] really_probe.part.0+0x9c/0x30c [ 6.725606] __driver_probe_device+0x98/0x144 [ 6.729600] driver_probe_device+0xc8/0x15c [ 6.734114] __device_attach_driver+0xb4/0x120 [ 6.738106] bus_for_each_drv+0x78/0xd0 [ 6.742619] __device_attach+0xdc/0x184 [ 6.746351] device_initial_probe+0x14/0x20 [ 6.750172] bus_probe_device+0x9c/0xa4 [ 6.754337] deferred_probe_work_func+0x88/0xc0 [ 6.758158] process_one_work+0x1d0/0x370 [ 6.762671] worker_thread+0x2c8/0x470 [ 6.766839] kthread+0x15c/0x170 [ 6.770483] ret_from_fork+0x10/0x20 [ 6.773870] ---[ end trace 5884eb76cd26d274 ]--- [ 6.777500] ------------[ cut here ]------------ [ 6.782043] [CRTC:93:crtc-0] must not have both a cursor plane and a cursor_move func [ 6.782063] WARNING: CPU: 1 PID: 76 at drivers/gpu/drm/drm_mode_config.c:654 drm_mode_config_validate+0x290/0x4d0 [ 6.794362] Modules linked in: [ 6.804600] CPU: 1 PID: 76 Comm: kworker/u8:2 Tainted: G W 5.15.0-rc1-dirty #43 [ 6.807555] Hardware name: Qualcomm Technologies, Inc. DB820c (DT) [ 6.816148] Workqueue: events_unbound deferred_probe_work_func [ 6.822311] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 6.828126] pc : drm_mode_config_validate+0x290/0x4d0 [ 6.834981] lr : drm_mode_config_validate+0x290/0x4d0 [ 6.840189] sp : ffff8000121b3980 [ 6.845223] x29: ffff8000121b3990 x28: 0000000000000000 x27: 0000000000000001 [ 6.848525] x26: ffff8000114cde50 x25: ffff8000114cdd40 x24: ffff0000987282d8 [ 6.855643] x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000001 [ 6.862763] x20: ffff000098728000 x19: ffff000080a39000 x18: ffffffffffffffff [ 6.869879] x17: 3136564e3631564e x16: 0000000000000324 x15: ffff800011c790c2 [ 6.876998] x14: 0000000000000000 x13: ffff800011a22850 x12: 0000000000000a2f [ 6.884116] x11: 0000000000000365 x10: ffff800011a22850 x9 : ffff800011a22850 [ 6.891234] x8 : 00000000ffffefff x7 : ffff800011a7a850 x6 : ffff800011a7a850 [ 6.898351] x5 : 000000000000bff4 x4 : 40000000fffff365 x3 : 0000000000000000 [ 6.905470] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff00008093b800 [ 6.912590] Call trace: [ 6.919702] drm_mode_config_validate+0x290/0x4d0 [ 6.921960] drm_dev_register+0x17c/0x210 [ 6.926821] msm_drm_bind+0x4b4/0x694 [ 6.930813] try_to_bring_up_master+0x164/0x1d0 [ 6.934459] __component_add+0xa0/0x170 [ 6.938799] component_add+0x14/0x20 [ 6.942619] msm_hdmi_dev_probe+0x1c/0x2c [ 6.946438] platform_probe+0x68/0xe0 [ 6.950345] really_probe.part.0+0x9c/0x30c [ 6.953991] __driver_probe_device+0x98/0x144 [ 6.957984] driver_probe_device+0xc8/0x15c [ 6.962498] __device_attach_driver+0xb4/0x120 [ 6.966492] bus_for_each_drv+0x78/0xd0 [ 6.971004] __device_attach+0xdc/0x184 [ 6.974737] device_initial_probe+0x14/0x20 [ 6.978556] bus_probe_device+0x9c/0xa4 [ 6.982722] deferred_probe_work_func+0x88/0xc0 [ 6.986543] process_one_work+0x1d0/0x370 [ 6.991057] worker_thread+0x2c8/0x470 [ 6.995223] kthread+0x15c/0x170 [ 6.998869] ret_from_fork+0x10/0x20 [ 7.002255] ---[ end trace 5884eb76cd26d275 ]--- Fixes: aa649e87 ("drm/msm/mdp5: mdp5_crtc: Restore cursor state only if LM cursors are enabled") Signed-off-by:
-
Colin Ian King authored
commit 2133c4fc upstream. The initialization of pointer dev dereferences pointer edp before edp is null checked, so there is a potential null pointer deference issue. Fix this by only dereferencing edp after edp has been null checked. Addresses-Coverity: ("Dereference before null check") Fixes: ab5b0107 ("drm/msm: Initial add eDP support in msm drm driver (v5)") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
-
Douglas Anderson authored
commit 97794170 upstream. In commit e11f5bd8 ("drm: Add support for DP 1.4 Compliance edid corruption test") the function connector_bad_edid() started assuming that the memory for the EDID passed to it was big enough to hold `edid[0x7e] + 1` blocks of data (1 extra for the base block). It completely ignored the fact that the function was passed `num_blocks` which indicated how much memory had been allocated for the EDID. Let's fix this by adding a bounds check. This is important for handling the case where there's an error in the first block of the EDID. In that case we will call connector_bad_edid() without having re-allocated memory based on `edid[0x7e]`. Fixes: e11f5bd8 ("drm: Add support for DP 1.4 Compliance edid corruption test") Reported-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Vegard Nossum authored
commit a14bc107 upstream. Fix the following build/link error by adding a dependency on the CRC32 routines: ld: drivers/gpu/drm/panel/panel-olimex-lcd-olinuxino.o: in function `lcd_olinuxino_probe': panel-olimex-lcd-olinuxino.c:(.text+0x303): undefined reference to `crc32_le' Fixes: 17fd7a9d ("drm/panel: Add support for Olimex LCD-OLinuXino panel") Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211012115242.10325-1-vegard.nossum@oracle.com Signed-off-by:
-
Kamal Dasu authored
commit 75b3cb97 upstream. Intermittent Kernel crash has been observed on probe in bcm_qspi_mspi_l2_isr() handler when the MSPI spifie interrupt bit has not been cleared before registering for interrupts. Fix the driver to move SoC specific custom interrupt handling code before we register IRQ in probe. Also clear MSPI interrupt status resgiter prior to registering IRQ handlers. Fixes: cc20a386 ("spi: iproc-qspi: Add Broadcom iProc SoCs support") Signed-off-by:
Kamal Dasu <kdasu@broadcom.com> Acked-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Mark Brown authored
commit 6840615f upstream. Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding an id_table listing the SPI IDs for everything. Fixes: 96c8395e ("spi: Revert modalias changes") Signed-off-by:
-
Vadim Pasternak authored
commit db9cc7d6 upstream. Fix shift argument for function rol32(). It should be provided in bits, while was provided in bytes. Fixes: 86148190 ("platform/mellanox: mlxreg-io: Add support for complex attributes") Signed-off-by:
Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20210927142214.2613929-3-vadimp@nvidia.com Signed-off-by:
-
Vadim Pasternak authored
commit 9b024201 upstream. Change kstrtou32() argument 'base' to be zero instead of 'len'. It works by chance for setting one bit value, but it is not supposed to work in case value passed to mlxreg_io_attr_store() is greater than 1. It works for example, for: echo 1 > /sys/devices/platform/mlxplat/mlxreg-io/hwmon/.../jtag_enable But it will fail for: echo n > /sys/devices/platform/mlxplat/mlxreg-io/hwmon/.../jtag_enable, where n > 1. The flow for input buffer conversion is as below: _kstrtoull(const char *s, unsigned int base, unsigned long long *res) calls: rv = _parse_integer(s, base, &_res); For the second case, where n > 1: - _parse_integer() converts 's' to 'val'. For n=2, 'len' is set to 2 (string buffer is 0x32 0x0a), for n=3 'len' is set to 3 (string buffer 0x33 0x0a), etcetera. - 'base' is equal or greater then '2' (length of input buffer). As a result, _parse_integer() exits with result zero (rv): rv = 0; while (1) { ... if (val >= base)-> (2 >= 2) break; ... rv++; ... } And _kstrtoull() in their turn will fail: if (rv == 0) return -EINVAL; Fixes: 5ec4a8ac ("platform/mellanox: Introduce support for Mellanox register access driver") Signed-off-by:
-
Ido Schimmel authored
commit 332fdf95 upstream. Currently, mlxsw allows cooling states to be set above the maximum cooling state supported by the driver: # cat /sys/class/thermal/thermal_zone2/cdev0/type mlxsw_fan # cat /sys/class/thermal/thermal_zone2/cdev0/max_state 10 # echo 18 > /sys/class/thermal/thermal_zone2/cdev0/cur_state # echo $? 0 This results in out-of-bounds memory accesses when thermal state transition statistics are enabled (CONFIG_THERMAL_STATISTICS=y), as the transition table is accessed with a too large index (state) [1]. According to the thermal maintainer, it is the responsibility of the driver to reject such operations [2]. Therefore, return an error when the state to be set exceeds the maximum cooling state supported by the driver. To avoid dead code, as suggested by the thermal maintainer [3], partially revert commit a421ce08 ("mlxsw: core: Extend cooling device with cooling levels") that tried to interpret these invalid cooling states (above the maximum) in a special way. The cooling levels array is not removed in order to prevent the fans going below 20% PWM, which would cause them to get stuck at 0% PWM. [1] BUG: KASAN: slab-out-of-bounds in thermal_cooling_device_stats_update+0x271/0x290 Read of size 4 at addr ffff8881052f7bf8 by task kworker/0:0/5 CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.15.0-rc3-custom-45935-gce1adf704b14 #122 Hardware name: Mellanox Technologies Ltd. "MSN2410-CB2FO"/"SA000874", BIOS 4.6.5 03/08/2016 Workqueue: events_freezable_power_ thermal_zone_device_check Call Trace: dump_stack_lvl+0x8b/0xb3 print_address_description.constprop.0+0x1f/0x140 kasan_report.cold+0x7f/0x11b thermal_cooling_device_stats_update+0x271/0x290 __thermal_cdev_update+0x15e/0x4e0 thermal_cdev_update+0x9f/0xe0 step_wise_throttle+0x770/0xee0 thermal_zone_device_update+0x3f6/0xdf0 process_one_work+0xa42/0x1770 worker_thread+0x62f/0x13e0 kthread+0x3ee/0x4e0 ret_from_fork+0x1f/0x30 Allocated by task 1: kasan_save_stack+0x1b/0x40 __kasan_kmalloc+0x7c/0x90 thermal_cooling_device_setup_sysfs+0x153/0x2c0 __thermal_cooling_device_register.part.0+0x25b/0x9c0 thermal_cooling_device_register+0xb3/0x100 mlxsw_thermal_init+0x5c5/0x7e0 __mlxsw_core_bus_device_register+0xcb3/0x19c0 mlxsw_core_bus_device_register+0x56/0xb0 mlxsw_pci_probe+0x54f/0x710 local_pci_probe+0xc6/0x170 pci_device_probe+0x2b2/0x4d0 really_probe+0x293/0xd10 __driver_probe_device+0x2af/0x440 driver_probe_device+0x51/0x1e0 __driver_attach+0x21b/0x530 bus_for_each_dev+0x14c/0x1d0 bus_add_driver+0x3ac/0x650 driver_register+0x241/0x3d0 mlxsw_sp_module_init+0xa2/0x174 do_one_initcall+0xee/0x5f0 kernel_init_freeable+0x45a/0x4de kernel_init+0x1f/0x210 ret_from_fork+0x1f/0x30 The buggy address belongs to the object at ffff8881052f7800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 1016 bytes inside of 1024-byte region [ffff8881052f7800, ffff8881052f7c00) The buggy address belongs to the page: page:0000000052355272 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1052f0 head:0000000052355272 order:3 compound_mapcount:0 compound_pincount:0 flags: 0x200000000010200(slab|head|node=0|zone=2) raw: 0200000000010200 ffffea0005034800 0000000300000003 ffff888100041dc0 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881052f7a80: 00 00 00 00 00 00 04 fc fc fc fc fc fc fc fc fc ffff8881052f7b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff8881052f7b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff8881052f7c00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8881052f7c80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [2] https://lore.kernel.org/linux-pm/9aca37cb-1629-5c67-1895-1fdc45c0244e@linaro.org/ [3] https://lore.kernel.org/linux-pm/af9857f2-578e-de3a-e62b-6baff7e69fd4@linaro.org/ CC: Daniel Lezcano <daniel.lezcano@linaro.org> Fixes: a50c1e35 ("mlxsw: core: Implement thermal zone") Fixes: a421ce08 ("mlxsw: core: Extend cooling device with cooling levels") Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Tested-by:
-
Wang Hai authored
commit 776c7501 upstream. I got a null-ptr-deref report: KASAN: null-ptr-deref in range [0x0000000000000090-0x0000000000000097] ... RIP: 0010:regulator_enable+0x84/0x260 ... Call Trace: ahci_platform_enable_regulators+0xae/0x320 ahci_platform_enable_resources+0x1a/0x120 ahci_probe+0x4f/0x1b9 platform_probe+0x10b/0x280 ... entry_SYSCALL_64_after_hwframe+0x44/0xae If devm_regulator_get() in ahci_platform_get_resources() fails, hpriv->phy_regulator will point to NULL, when enabling or disabling it, null-ptr-deref will occur. ahci_probe() ahci_platform_get_resources() devm_regulator_get(, "phy") // failed, let phy_regulator = NULL ahci_platform_enable_resources() ahci_platform_enable_regulators() regulator_enable(hpriv->phy_regulator) // null-ptr-deref commit 962399bb ("ata: libahci_platform: Fix regulator_get_optional() misuse") replaces devm_regulator_get_optional() with devm_regulator_get(), but PHY regulator omits to delete "hpriv->phy_regulator = NULL;" like AHCI. Delete it like AHCI regulator to fix this bug. Fixes: commit 962399bb ("ata: libahci_platform: Fix regulator_get_optional() misuse") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wang Hai <wanghai38@huawei.com> Reviewed-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
-
Dan Carpenter authored
commit 01392347 upstream. The last byte of "pad" is used without being initialized. Fixes: 55dba312 ("libata: update ->data_xfer hook for ATAPI") Signed-off-by:
-
Ziyang Xuan authored
commit 291c932f upstream. 'skb' is allocated in digital_in_send_sdd_req(), but not free when digital_in_send_cmd() failed, which will cause memory leak. Fix it by freeing 'skb' if digital_in_send_cmd() return failed. Fixes: 2c66daec ("NFC Digital: Add NFC-A technology support") Signed-off-by:
Ziyang Xuan <william.xuanziyang@huawei.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by:
-
Ziyang Xuan authored
commit 58e7dcc9 upstream. 'params' is allocated in digital_tg_listen_mdaa(), but not free when digital_send_cmd() failed, which will cause memory leak. Fix it by freeing 'params' if digital_send_cmd() return failed. Fixes: 1c7a4c24 ("NFC Digital: Add target NFC-DEP support") Signed-off-by:
-
Ziyang Xuan authored
commit 0911ab31 upstream. When nfc proto id is using, nfc_proto_register() return -EBUSY error code, but forgot to unregister proto. Fix it by adding proto_unregister() in the error handling case. Fixes: c7fe3b52 ("NFC: add NFC socket family") Signed-off-by:
-
Cindy Lu authored
commit bcef9356 upstream. Fix the wrong input in for config_cb. In function vhost_vdpa_config_cb, the input cb.private was used as struct vhost_vdpa, so the input was wrong here, fix this issue Fixes: 776f3950 ("vhost_vdpa: Support config interrupt in vdpa") Signed-off-by:
Cindy Lu <lulu@redhat.com> Link: https://lore.kernel.org/r/20210929090933.20465-1-lulu@redhat.com Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
