Merge tag 'staging-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging/IIO updates from Greg KH:
 "Here is the big staging and IIO driver update for 4.18-rc1.

  It was delayed as I wanted to make sure the final driver deletions did
  not cause any major merge issues, and all now looks good.

  There are a lot of patches here, just over 1000. The diffstat summary
  shows the major changes here:

	1007 files changed, 16828 insertions(+), 227770 deletions(-)

  Because of this, we might be close to shrinking the overall kernel
  source code size for two releases in a row.

  There was loads of work in this release cycle, primarily:

   - tons of ks7010 driver cleanups

   - lots of mt7621 driver fixes and cleanups

   - most driver cleanups

   - wilc1000 fixes and cleanups

   - lots and lots of IIO driver cleanups and new additions

   - debugfs cleanups for all staging drivers

   - lots of other staging driver cleanups and fixes, the shortlog has
     the full details.

  but the big user-visable things here are the removal of 3 chunks of
  code:

   - ncpfs and ipx were removed on schedule, no one has cared about this
     code since it moved to staging last year, and if it needs to come
     back, it can be reverted.

   - lustre file system is removed.

     I've ranted at the lustre developers about once a year for the past
     5 years, with no real forward progress at all to clean things up
     and get the code into the "real" part of the kernel.

     Given that the lustre developers continue to work on an external
     tree and try to port those changes to the in-kernel tree every once
     in a while, this whole thing really really is not working out at
     all. So I'm deleting it so that the developers can spend the time
     working in their out-of-tree location and get things cleaned up
     properly to get merged into the tree correctly at a later date.

  Because of these file removals, you will have merge issues on some of
  these files (2 in the ipx code, 1 in the ncpfs code, and 1 in the
  atomisp driver). Just delete those files, it's a simple merge :)

  All of this has been in linux-next for a while with no reported
  problems"

* tag 'staging-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1011 commits)
  staging: ipx: delete it from the tree
  ncpfs: remove uapi .h files
  ncpfs: remove Documentation
  ncpfs: remove compat functionality
  staging: ncpfs: delete it
  staging: lustre: delete the filesystem from the tree.
  staging: vc04_services: no need to save the log debufs dentries
  staging: vc04_services: vchiq_debugfs_log_entry can be a void *
  staging: vc04_services: remove struct vchiq_debugfs_info
  staging: vc04_services: move client dbg directory into static variable
  staging: vc04_services: remove odd vchiq_debugfs_top() wrapper
  staging: vc04_services: no need to check debugfs return values
  staging: mt7621-gpio: reorder includes alphabetically
  staging: mt7621-gpio: change gc_map to don't use pointers
  staging: mt7621-gpio: use GPIOF_DIR_OUT and GPIOF_DIR_IN macros instead of custom values
  staging: mt7621-gpio: change 'to_mediatek_gpio' to make just a one line return
  staging: mt7621-gpio: dt-bindings: update documentation for #interrupt-cells property
  staging: mt7621-gpio: update #interrupt-cells for the gpio node
  staging: mt7621-gpio: dt-bindings: complete documentation for the gpio
  staging: mt7621-dts: add missing properties to gpio node
  ...

Documentation/ABI/testing/sysfs-bus-iio

@@ -190,6 +190,13 @@ Description:
 		but should match other such assignments on device).
 		Units after application of scale and offset are m/s^2.
 
+What:		/sys/bus/iio/devices/iio:deviceX/in_angl_raw
+KernelVersion:	4.17
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Angle of rotation. Units after application of scale and offset
+		are radians.
+
 What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_x_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_y_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_z_raw
@@ -297,6 +304,7 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_pressure_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_humidityrelative_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_magn_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_rot_offset
+What:		/sys/bus/iio/devices/iio:deviceX/in_angl_offset
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -350,6 +358,7 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_humidityrelative_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_illuminance_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_countY_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_angl_scale
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
 Description:

Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt

@@ -7,6 +7,7 @@ Required properties:
 			- "amlogic,meson-gxbb-saradc" for GXBB
 			- "amlogic,meson-gxl-saradc" for GXL
 			- "amlogic,meson-gxm-saradc" for GXM
+			- "amlogic,meson-axg-saradc" for AXG
 		along with the generic "amlogic,meson-saradc"
 - reg:		the physical base address and length of the registers
 - interrupts:	the interrupt indicating end of sampling

Documentation/devicetree/bindings/iio/adc/mcp320x.txt

@@ -49,7 +49,7 @@ Required properties:
 Examples:
 spi_controller {
 	mcp3x0x@0 {
-		compatible = "mcp3002";
+		compatible = "microchip,mcp3002";
 		reg = <0>;
 		spi-max-frequency = <1000000>;
 		vref-supply = <&vref_reg>;

Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt

@@ -24,8 +24,11 @@ Required properties:
 - compatible: Should be one of:
   "st,stm32f4-adc-core"
   "st,stm32h7-adc-core"
+  "st,stm32mp1-adc-core"
 - reg: Offset and length of the ADC block register set.
-- interrupts: Must contain the interrupt for ADC block.
+- interrupts: One or more interrupts for ADC block. Some parts like stm32f4
+  and stm32h7 share a common ADC interrupt line. stm32mp1 has two separate
+  interrupt lines, one for each ADC within ADC block.
 - clocks: Core can use up to two clocks, depending on part used:
   - "adc" clock: for the analog circuitry, common to all ADCs.
     It's required on stm32f4.
@@ -53,6 +56,7 @@ Required properties:
 - compatible: Should be one of:
   "st,stm32f4-adc"
   "st,stm32h7-adc"
+  "st,stm32mp1-adc"
 - reg: Offset of ADC instance in ADC block (e.g. may be 0x0, 0x100, 0x200).
 - clocks: Input clock private to this ADC instance. It's required only on
   stm32f4, that has per instance clock input for registers access.

Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt

@@ -8,14 +8,16 @@ It is mainly targeted for:
 - PDM microphones (audio digital microphone)
 
 It features up to 8 serial digital interfaces (SPI or Manchester) and
-up to 4 filters on stm32h7.
+up to 4 filters on stm32h7 or 6 filters on stm32mp1.
 
 Each child node match with a filter instance.
 
 Contents of a STM32 DFSDM root node:
 ------------------------------------
 Required properties:
-- compatible: Should be "st,stm32h7-dfsdm".
+- compatible: Should be one of:
+  "st,stm32h7-dfsdm"
+  "st,stm32mp1-dfsdm"
 - reg: Offset and length of the DFSDM block register set.
 - clocks: IP and serial interfaces clocking. Should be set according
 		to rcc clock ID and "clock-names".
@@ -45,6 +47,7 @@ Required properties:
 	"st,stm32-dfsdm-adc" for sigma delta ADCs
 	"st,stm32-dfsdm-dmic" for audio digital microphone.
 - reg: Specifies the DFSDM filter instance used.
+	Valid values are from 0 to 3 on stm32h7, 0 to 5 on stm32mp1.
 - interrupts: IRQ lines connected to each DFSDM filter instance.
 - st,adc-channels:	List of single-ended channels muxed for this ADC.
 			valid values:

Documentation/devicetree/bindings/iio/afe/current-sense-amplifier.txt

+Current Sense Amplifier
+=======================
+
+When an io-channel measures the output voltage from a current sense
+amplifier, the interesting measurement is almost always the current
+through the sense resistor, not the voltage output. This binding
+describes such a current sense circuit.
+
+Required properties:
+- compatible : "current-sense-amplifier"
+- io-channels : Channel node of a voltage io-channel.
+- sense-resistor-micro-ohms : The sense resistance in microohms.
+
+Optional properties:
+- sense-gain-mult: Amplifier gain multiplier. The default is <1>.
+- sense-gain-div: Amplifier gain divider. The default is <1>.
+
+Example:
+
+sysi {
+	compatible = "current-sense-amplifier";
+	io-channels = <&tiadc 0>;
+
+	sense-resistor-micro-ohms = <20000>;
+	sense-gain-mul = <50>;
+};

Documentation/devicetree/bindings/iio/afe/current-sense-shunt.txt

+Current Sense Shunt
+===================
+
+When an io-channel measures the voltage over a current sense shunt,
+the interesting measurement is almost always the current through the
+shunt, not the voltage over it. This binding describes such a current
+sense circuit.
+
+Required properties:
+- compatible : "current-sense-shunt"
+- io-channels : Channel node of a voltage io-channel.
+- shunt-resistor-micro-ohms : The shunt resistance in microohms.
+
+Example:
+The system current is measured by measuring the voltage over a
+3.3 ohms shunt resistor.
+
+sysi {
+	compatible = "current-sense-shunt";
+	io-channels = <&tiadc 0>;
+
+	/* Divide the voltage by 3300000/1000000 (or 3.3) for the current. */
+	shunt-resistor-micro-ohms = <3300000>;
+};
+
+&i2c {
+	tiadc: adc@48 {
+		compatible = "ti,ads1015";
+		reg = <0x48>;
+		#io-channel-cells = <1>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@0 { /* IN0,IN1 differential */
+			reg = <0>;
+			ti,gain = <1>;
+			ti,datarate = <4>;
+		};
+	};
+};

Documentation/devicetree/bindings/iio/afe/voltage-divider.txt

+Voltage divider
+===============
+
+When an io-channel measures the midpoint of a voltage divider, the
+interesting voltage is often the voltage over the full resistance
+of the divider. This binding describes the voltage divider in such
+a curcuit.
+
+    Vin ----.
+            |
+         .-----.
+         |  R  |
+         '-----'
+            |
+            +---- Vout
+            |
+         .-----.
+         | Rout|
+         '-----'
+            |
+           GND
+
+Required properties:
+- compatible : "voltage-divider"
+- io-channels : Channel node of a voltage io-channel measuring Vout.
+- output-ohms : Resistance Rout over which the output voltage is measured.
+	        See full-ohms.
+- full-ohms : Resistance R + Rout for the full divider. The io-channel
+	      is scaled by the Rout / (R + Rout) quotient.
+
+Example:
+The system voltage is circa 12V, but divided down with a 22/222
+voltage divider (R = 200 Ohms, Rout = 22 Ohms) and fed to an ADC.
+
+sysv {
+	compatible = "voltage-divider";
+	io-channels = <&maxadc 1>;
+
+	/* Scale the system voltage by 22/222 to fit the ADC range. */
+	output-ohms = <22>;
+	full-ohms = <222>; /* 200 + 22 */
+};
+
+&spi {
+	maxadc: adc@0 {
+		compatible = "maxim,max1027";
+		reg = <0>;
+		#io-channel-cells = <1>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <15 IRQ_TYPE_EDGE_RISING>;
+		spi-max-frequency = <1000000>;
+	};
+};

Documentation/devicetree/bindings/iio/dac/ltc2632.txt

@@ -12,12 +12,26 @@ Required properties:
 Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt
 apply. In particular, "reg" and "spi-max-frequency" properties must be given.
 
+Optional properties:
+	- vref-supply: Phandle to the external reference voltage supply. This should
+	  only be set if there is an external reference voltage connected to the VREF
+	  pin. If the property is not set the internal reference is used.
+
 Example:
 
+	vref: regulator-vref {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-ltc2632";
+		regulator-min-microvolt = <1250000>;
+		regulator-max-microvolt = <1250000>;
+		regulator-always-on;
+	};
+
 	spi_master {
 		dac: ltc2632@0 {
 			compatible = "lltc,ltc2632-l12";
 			reg = <0>; /* CS0 */
 			spi-max-frequency = <1000000>;
+			vref-supply = <&vref>; /* optional */
 		};
 	};

Documentation/devicetree/bindings/iio/dac/ti,dac5571.txt

+* Texas Instruments DAC5571 Family
+
+Required properties:
+ - compatible: Should contain
+    "ti,dac5571"
+    "ti,dac6571"
+    "ti,dac7571"
+    "ti,dac5574"
+    "ti,dac6574"
+    "ti,dac7574"
+    "ti,dac5573"
+    "ti,dac6573"
+    "ti,dac7573"
+ - reg: Should contain the DAC I2C address
+
+Optional properties:
+ - vref-supply: The regulator supply for DAC reference voltage
+
+Example:
+dac@0 {
+	compatible = "ti,dac5571";
+	reg = <0x4C>;
+	vref-supply = <&vdd_supply>;
+};

Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt

@@ -8,10 +8,16 @@ Required properties:
  		"invensense,mpu6500"
 		"invensense,mpu9150"
 		"invensense,mpu9250"
+		"invensense,mpu9255"
 		"invensense,icm20608"
  - reg : the I2C address of the sensor
  - interrupt-parent : should be the phandle for the interrupt controller
- - interrupts : interrupt mapping for GPIO IRQ
+ - interrupts: interrupt mapping for IRQ. It should be configured with flags
+   IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or
+   IRQ_TYPE_EDGE_FALLING.
+
+  Refer to interrupt-controller/interrupts.txt for generic interrupt client node
+  bindings.
 
 Optional properties:
  - mount-matrix: an optional 3x3 mounting rotation matrix
@@ -24,7 +30,7 @@ Example:
 		compatible = "invensense,mpu6050";
 		reg = <0x68>;
 		interrupt-parent = <&gpio1>;
-		interrupts = <18 1>;
+		interrupts = <18 IRQ_TYPE_EDGE_RISING>;
 		mount-matrix = "-0.984807753012208",  /* x0 */
 		               "0",                   /* y0 */
 		               "-0.173648177666930",  /* z0 */
@@ -41,7 +47,7 @@ Example:
 		compatible = "invensense,mpu9250";
 		reg = <0x68>;
 		interrupt-parent = <&gpio3>;
-		interrupts = <21 1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
 		i2c-gate {
 			#address-cells = <1>;
 			#size-cells = <0>;

Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt

@@ -6,6 +6,7 @@ Required properties:
   "st,lsm6ds3h"
   "st,lsm6dsl"
   "st,lsm6dsm"
+  "st,ism330dlc"
 - reg: i2c address of the sensor / spi cs line
 
 Optional properties:

Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt

-* Texas Instruments LMP91000 potentiostat
+* Texas Instruments LMP91000 series of potentiostats
 
-http://www.ti.com/lit/ds/symlink/lmp91000.pdf
+LMP91000: http://www.ti.com/lit/ds/symlink/lmp91000.pdf
+LMP91002: http://www.ti.com/lit/ds/symlink/lmp91002.pdf
 
 Required properties:
 
-  - compatible: should be "ti,lmp91000"
+  - compatible: should be one of the following:
+                 "ti,lmp91000"
+                 "ti,lmp91002"
   - reg: the I2C address of the device
   - io-channels: the phandle of the iio provider
 

Documentation/filesystems/00-INDEX

@@ -89,8 +89,6 @@ locks.txt
 	- info on file locking implementations, flock() vs. fcntl(), etc.
 mandatory-locking.txt
 	- info on the Linux implementation of Sys V mandatory file locking.
-ncpfs.txt
-	- info on Novell Netware(tm) filesystem using NCP protocol.
 nfs/
 	- nfs-related documentation.
 nilfs2.txt

Documentation/filesystems/ncpfs.txt

-The ncpfs filesystem understands the NCP protocol, designed by the
-Novell Corporation for their NetWare(tm) product.  NCP is functionally
-similar to the NFS used in the TCP/IP community.
-To mount a NetWare filesystem, you need a special mount program, which
-can be found in the ncpfs package.  The home site for ncpfs is
-ftp.gwdg.de/pub/linux/misc/ncpfs, but sunsite and its many mirrors
-will have it as well.
-
-Related products are linware and mars_nwe, which will give Linux partial
-NetWare server functionality.
-
-mars_nwe can be found on ftp.gwdg.de/pub/linux/misc/ncpfs.

MAINTAINERS

@@ -796,6 +796,14 @@ M:	Michael Hanselmann <linux-kernel@hansmi.ch>
 S:	Supported
 F:	drivers/macintosh/ams/
 
+ANALOG DEVICES INC AD5686 DRIVER
+M:	Stefan Popa <stefan.popa@analog.com>
+L:	linux-pm@vger.kernel.org
+W:	http://ez.analog.com/community/linux-device-drivers
+S:	Supported
+F:	drivers/iio/dac/ad5686*
+F:	drivers/iio/dac/ad5696*
+
 ANALOG DEVICES INC AD9389B DRIVER
 M:	Hans Verkuil <hans.verkuil@cisco.com>
 L:	linux-media@vger.kernel.org
@@ -4421,6 +4429,12 @@ L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	drivers/staging/fsl-dpaa2/ethsw
 
+DPAA2 PTP CLOCK DRIVER
+M:	Yangbo Lu <yangbo.lu@nxp.com>
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+F:	drivers/staging/fsl-dpaa2/rtc
+
 DPT_I2O SCSI RAID DRIVER
 M:	Adaptec OEM Raid Solutions <aacraid@microsemi.com>
 L:	linux-scsi@vger.kernel.org
@@ -6968,6 +6982,15 @@ F:	drivers/staging/iio/
 F:	include/linux/iio/
 F:	tools/iio/
 
+IIO UNIT CONVERTER
+M:	Peter Rosin <peda@axentia.se>
+L:	linux-iio@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/iio/afe/current-sense-amplifier.txt
+F:	Documentation/devicetree/bindings/iio/afe/current-sense-shunt.txt
+F:	Documentation/devicetree/bindings/iio/afe/voltage-divider.txt
+F:	drivers/iio/afe/iio-rescale.c
+
 IKANOS/ADI EAGLE ADSL USB DRIVER
 M:	Matthieu Castet <castet.matthieu@free.fr>
 M:	Stanislaw Gruszka <stf_xl@wp.pl>
@@ -13433,15 +13456,6 @@ S:	Odd Fixes
 F:	Documentation/devicetree/bindings/staging/iio/
 F:	drivers/staging/iio/
 
-STAGING - LUSTRE PARALLEL FILESYSTEM
-M:	Oleg Drokin <oleg.drokin@intel.com>
-M:	Andreas Dilger <andreas.dilger@intel.com>
-M:	James Simmons <jsimmons@infradead.org>
-L:	lustre-devel@lists.lustre.org (moderated for non-subscribers)
-W:	http://wiki.lustre.org/
-S:	Maintained
-F:	drivers/staging/lustre
-
 STAGING - NVIDIA COMPLIANT EMBEDDED CONTROLLER INTERFACE (nvec)
 M:	Marc Dietrich <marvin24@gmx.de>
 L:	ac100@lists.launchpad.net (moderated for non-subscribers)

drivers/iio/Kconfig

@@ -70,6 +70,7 @@ config IIO_TRIGGERED_EVENT
 
 source "drivers/iio/accel/Kconfig"
 source "drivers/iio/adc/Kconfig"
+source "drivers/iio/afe/Kconfig"
 source "drivers/iio/amplifiers/Kconfig"
 source "drivers/iio/chemical/Kconfig"
 source "drivers/iio/common/Kconfig"
@@ -92,6 +93,7 @@ source "drivers/iio/potentiometer/Kconfig"
 source "drivers/iio/potentiostat/Kconfig"
 source "drivers/iio/pressure/Kconfig"
 source "drivers/iio/proximity/Kconfig"
+source "drivers/iio/resolver/Kconfig"
 source "drivers/iio/temperature/Kconfig"
 
 endif # IIO

drivers/iio/Makefile

@@ -15,6 +15,7 @@ obj-$(CONFIG_IIO_TRIGGERED_EVENT) += industrialio-triggered-event.o
 
 obj-y += accel/
 obj-y += adc/
+obj-y += afe/
 obj-y += amplifiers/
 obj-y += buffer/
 obj-y += chemical/
@@ -35,5 +36,6 @@ obj-y += potentiometer/
 obj-y += potentiostat/
 obj-y += pressure/
 obj-y += proximity/
+obj-y += resolver/
 obj-y += temperature/
 obj-y += trigger/

drivers/iio/accel/Kconfig

@@ -5,6 +5,30 @@
 
 menu "Accelerometers"
 
+config ADIS16201
+        tristate "Analog Devices ADIS16201 Dual-Axis Digital Inclinometer and Accelerometer"
+        depends on SPI
+        select IIO_ADIS_LIB
+        select IIO_ADIS_LIB_BUFFER if IIO_BUFFER
+        help
+          Say Y here to build support for Analog Devices adis16201 dual-axis
+          digital inclinometer and accelerometer.
+
+          To compile this driver as a module, say M here: the module will
+          be called adis16201.
+
+config ADIS16209
+        tristate "Analog Devices ADIS16209 Dual-Axis Digital Inclinometer and Accelerometer"
+        depends on SPI
+        select IIO_ADIS_LIB
+        select IIO_ADIS_LIB_BUFFER if IIO_BUFFER
+        help
+          Say Y here to build support for Analog Devices adis16209 dual-axis digital inclinometer
+          and accelerometer.
+
+          To compile this driver as a module, say M here: the module will be
+          called adis16209.
+
 config ADXL345
 	tristate
 

drivers/iio/accel/Makefile

@@ -4,6 +4,8 @@
 #
 
 # When adding new entries keep the list in alphabetical order
+obj-$(CONFIG_ADIS16201) += adis16201.o
+obj-$(CONFIG_ADIS16209) += adis16209.o
 obj-$(CONFIG_ADXL345) += adxl345_core.o
 obj-$(CONFIG_ADXL345_I2C) += adxl345_i2c.o
 obj-$(CONFIG_ADXL345_SPI) += adxl345_spi.o