Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Rejecting non-native endian BTF overlapped with the addition
of support for it.

The rest were more simple overlapping changes, except the
renesas ravb binding update, which had to follow a file
move as well as a YAML conversion.

Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/admin-guide/cgroup-v2.rst

@@ -1324,15 +1324,26 @@ PAGE_SIZE multiple when read back.
 	  pgmajfault
 		Number of major page faults incurred
 
-	  workingset_refault
-		Number of refaults of previously evicted pages
+	  workingset_refault_anon
+		Number of refaults of previously evicted anonymous pages.
 
-	  workingset_activate
-		Number of refaulted pages that were immediately activated
+	  workingset_refault_file
+		Number of refaults of previously evicted file pages.
 
-	  workingset_restore
-		Number of restored pages which have been detected as an active
-		workingset before they got reclaimed.
+	  workingset_activate_anon
+		Number of refaulted anonymous pages that were immediately
+		activated.
+
+	  workingset_activate_file
+		Number of refaulted file pages that were immediately activated.
+
+	  workingset_restore_anon
+		Number of restored anonymous pages which have been detected as
+		an active workingset before they got reclaimed.
+
+	  workingset_restore_file
+		Number of restored file pages which have been detected as an
+		active workingset before they got reclaimed.
 
 	  workingset_nodereclaim
 		Number of times a shadow node has been reclaimed

Documentation/admin-guide/device-mapper/dm-crypt.rst

@@ -67,7 +67,7 @@ Parameters::
     the value passed in <key_size>.
 
 <key_type>
-    Either 'logon' or 'user' kernel key type.
+    Either 'logon', 'user' or 'encrypted' kernel key type.
 
 <key_description>
     The kernel keyring key description crypt target should look for
@@ -121,6 +121,14 @@ submit_from_crypt_cpus
     thread because it benefits CFQ to have writes submitted using the
     same context.
 
+no_read_workqueue
+    Bypass dm-crypt internal workqueue and process read requests synchronously.
+
+no_write_workqueue
+    Bypass dm-crypt internal workqueue and process write requests synchronously.
+    This option is automatically enabled for host-managed zoned block devices
+    (e.g. host-managed SMR hard-disks).
+
 integrity:<bytes>:<type>
     The device requires additional <bytes> metadata per-sector stored
     in per-bio integrity structure. This metadata must by provided

Documentation/admin-guide/pm/cpuidle.rst

@@ -690,7 +690,7 @@ which of the two parameters is added to the kernel command line.  In the
 instruction of the CPUs (which, as a rule, suspends the execution of the program
 and causes the hardware to attempt to enter the shallowest available idle state)
 for this purpose, and if ``idle=poll`` is used, idle CPUs will execute a
-more or less ``lightweight'' sequence of instructions in a tight loop.  [Note
+more or less "lightweight" sequence of instructions in a tight loop.  [Note
 that using ``idle=poll`` is somewhat drastic in many cases, as preventing idle
 CPUs from saving almost any energy at all may not be the only effect of it.
 For example, on Intel hardware it effectively prevents CPUs from using

Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml

@@ -23,7 +23,7 @@ properties:
   compatible:
     items:
       - const: raspberrypi,bcm2835-firmware
-      - const: simple-bus
+      - const: simple-mfd
 
   mboxes:
     $ref: '/schemas/types.yaml#/definitions/phandle'
@@ -57,7 +57,7 @@ required:
 examples:
   - |
     firmware {
-        compatible = "raspberrypi,bcm2835-firmware", "simple-bus";
+        compatible = "raspberrypi,bcm2835-firmware", "simple-mfd";
         mboxes = <&mailbox>;
 
         firmware_clocks: clocks {

Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml

@@ -67,7 +67,7 @@ examples:
 
     main_crypto: crypto@4e00000 {
         compatible = "ti,j721-sa2ul";
-        reg = <0x0 0x4e00000 0x0 0x1200>;
+        reg = <0x4e00000 0x1200>;
         power-domains = <&k3_pds 264 TI_SCI_PD_EXCLUSIVE>;
         dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>,
                <&main_udmap 0x4001>;

Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml

@@ -145,10 +145,10 @@ examples:
 
     display@fd4a0000 {
         compatible = "xlnx,zynqmp-dpsub-1.7";
-        reg = <0x0 0xfd4a0000 0x0 0x1000>,
-              <0x0 0xfd4aa000 0x0 0x1000>,
-              <0x0 0xfd4ab000 0x0 0x1000>,
-              <0x0 0xfd4ac000 0x0 0x1000>;
+        reg = <0xfd4a0000 0x1000>,
+              <0xfd4aa000 0x1000>,
+              <0xfd4ab000 0x1000>,
+              <0xfd4ac000 0x1000>;
         reg-names = "dp", "blend", "av_buf", "aud";
         interrupts = <0 119 4>;
         interrupt-parent = <&gic>;

Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml

@@ -57,7 +57,7 @@ examples:
 
     dma: dma-controller@fd4c0000 {
       compatible = "xlnx,zynqmp-dpdma";
-      reg = <0x0 0xfd4c0000 0x0 0x1000>;
+      reg = <0xfd4c0000 0x1000>;
       interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
       interrupt-parent = <&gic>;
       clocks = <&dpdma_clk>;

Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt

@@ -20,8 +20,9 @@ Required properties:
 - gpio-controller : Marks the device node as a GPIO controller
 - interrupts : Interrupt specifier, see interrupt-controller/interrupts.txt
 - interrupt-controller : Mark the GPIO controller as an interrupt-controller
-- ngpios : number of GPIO lines, see gpio.txt
-  (should be multiple of 8, up to 80 pins)
+- ngpios : number of *hardware* GPIO lines, see gpio.txt. This will expose
+  2 software GPIOs per hardware GPIO: one for hardware input, one for hardware
+  output. Up to 80 pins, must be a multiple of 8.
 - clocks : A phandle to the APB clock for SGPM clock division
 - bus-frequency : SGPM CLK frequency
 

Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml

@@ -30,7 +30,7 @@ properties:
     const: 0
 
 patternProperties:
-  "^multi-led[0-9a-f]$":
+  "^multi-led@[0-9a-b]$":
     type: object
     allOf:
       - $ref: leds-class-multicolor.yaml#

Documentation/devicetree/bindings/media/i2c/imx274.txt

-* Sony 1/2.5-Inch 8.51Mp CMOS Digital Image Sensor
-
-The Sony imx274 is a 1/2.5-inch CMOS active pixel digital image sensor with
-an active array size of 3864H x 2202V. It is programmable through I2C
-interface. The I2C address is fixed to 0x1a as per sensor data sheet.
-Image data is sent through MIPI CSI-2, which is configured as 4 lanes
-at 1440 Mbps.
-
-
-Required Properties:
-- compatible: value should be "sony,imx274" for imx274 sensor
-- reg: I2C bus address of the device
-
-Optional Properties:
-- reset-gpios: Sensor reset GPIO
-- clocks: Reference to the input clock.
-- clock-names: Should be "inck".
-- VANA-supply: Sensor 2.8v analog supply.
-- VDIG-supply: Sensor 1.8v digital core supply.
-- VDDL-supply: Sensor digital IO 1.2v supply.
-
-The imx274 device node should contain one 'port' child node with
-an 'endpoint' subnode. For further reading on port node refer to
-Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-Example:
-	sensor@1a {
-		compatible = "sony,imx274";
-		reg = <0x1a>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reset-gpios = <&gpio_sensor 0 0>;
-		port {
-			sensor_out: endpoint {
-				remote-endpoint = <&csiss_in>;
-			};
-		};
-	};

Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/sony,imx274.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony 1/2.5-Inch 8.51MP CMOS Digital Image Sensor
+
+maintainers:
+  - Leon Luo <leonl@leopardimaging.com>
+
+description: |
+  The Sony IMX274 is a 1/2.5-inch CMOS active pixel digital image sensor with an
+  active array size of 3864H x 2202V. It is programmable through I2C interface.
+  Image data is sent through MIPI CSI-2, which is configured as 4 lanes at 1440
+  Mbps.
+
+properties:
+  compatible:
+    const: sony,imx274
+
+  reg:
+    const: 0x1a
+
+  reset-gpios:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: inck
+
+  vana-supply:
+    description: Sensor 2.8 V analog supply.
+    maxItems: 1
+
+  vdig-supply:
+    description: Sensor 1.8 V digital core supply.
+    maxItems: 1
+
+  vddl-supply:
+    description: Sensor digital IO 1.2 V supply.
+    maxItems: 1
+
+  port:
+    type: object
+    description: Output video port. See ../video-interfaces.txt.
+
+required:
+  - compatible
+  - reg
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imx274: camera-sensor@1a {
+            compatible = "sony,imx274";
+            reg = <0x1a>;
+            reset-gpios = <&gpio_sensor 0 0>;
+
+            port {
+                sensor_out: endpoint {
+                    remote-endpoint = <&csiss_in>;
+                };
+            };
+        };
+    };
+
+...

Documentation/devicetree/bindings/net/renesas,etheravb.yaml

@@ -31,6 +31,7 @@ properties:
               - renesas,etheravb-r8a774a1     # RZ/G2M
               - renesas,etheravb-r8a774b1     # RZ/G2N
               - renesas,etheravb-r8a774c0     # RZ/G2E
+              - renesas,etheravb-r8a774e1     # RZ/G2H
               - renesas,etheravb-r8a7795      # R-Car H3
               - renesas,etheravb-r8a7796      # R-Car M3-W
               - renesas,etheravb-r8a77961     # R-Car M3-W+

Documentation/kbuild/llvm.rst

@@ -39,10 +39,10 @@ which can help simplify cross compiling. ::
 	ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- make CC=clang
 
 ``CROSS_COMPILE`` is not used to prefix the Clang compiler binary, instead
-``CROSS_COMPILE`` is used to set a command line flag: ``--target <triple>``. For
+``CROSS_COMPILE`` is used to set a command line flag: ``--target=<triple>``. For
 example: ::
 
-	clang --target aarch64-linux-gnu foo.c
+	clang --target=aarch64-linux-gnu foo.c
 
 LLVM Utilities
 --------------

Documentation/userspace-api/media/v4l/buffer.rst

@@ -701,23 +701,6 @@ Memory Consistency Flags
     :stub-columns: 0
     :widths:       3 1 4
 
-    * .. _`V4L2-FLAG-MEMORY-NON-CONSISTENT`:
-
-      - ``V4L2_FLAG_MEMORY_NON_CONSISTENT``
-      - 0x00000001
-      - A buffer is allocated either in consistent (it will be automatically
-	coherent between the CPU and the bus) or non-consistent memory. The
-	latter can provide performance gains, for instance the CPU cache
-	sync/flush operations can be avoided if the buffer is accessed by the
-	corresponding device only and the CPU does not read/write to/from that
-	buffer. However, this requires extra care from the driver -- it must
-	guarantee memory consistency by issuing a cache flush/sync when
-	consistency is needed. If this flag is set V4L2 will attempt to
-	allocate the buffer in non-consistent memory. The flag takes effect
-	only if the buffer is used for :ref:`memory mapping <mmap>` I/O and the
-	queue reports the :ref:`V4L2_BUF_CAP_SUPPORTS_MMAP_CACHE_HINTS
-	<V4L2-BUF-CAP-SUPPORTS-MMAP-CACHE-HINTS>` capability.
-
 .. c:type:: v4l2_memory
 
 enum v4l2_memory

Documentation/userspace-api/media/v4l/vidioc-create-bufs.rst

@@ -120,13 +120,9 @@ than the number requested.
 	If you want to just query the capabilities without making any
 	other changes, then set ``count`` to 0, ``memory`` to
 	``V4L2_MEMORY_MMAP`` and ``format.type`` to the buffer type.
-    * - __u32
-      - ``flags``
-      - Specifies additional buffer management attributes.
-	See :ref:`memory-flags`.
 
     * - __u32
-      - ``reserved``\ [6]
+      - ``reserved``\ [7]
       - A place holder for future extensions. Drivers and applications
 	must set the array to zero.
 

Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst

@@ -112,17 +112,10 @@ aborting or finishing any DMA in progress, an implicit
 	``V4L2_MEMORY_MMAP`` and ``type`` set to the buffer type. This will
 	free any previously allocated buffers, so this is typically something
 	that will be done at the start of the application.
-    * - union {
-      - (anonymous)
-    * - __u32
-      - ``flags``
-      - Specifies additional buffer management attributes.
-	See :ref:`memory-flags`.
     * - __u32
       - ``reserved``\ [1]
-      - Kept for backwards compatibility. Use ``flags`` instead.
-    * - }
-      -
+      - A place holder for future extensions. Drivers and applications
+	must set the array to zero.
 
 .. tabularcolumns:: |p{6.1cm}|p{2.2cm}|p{8.7cm}|
 
@@ -169,7 +162,6 @@ aborting or finishing any DMA in progress, an implicit
       - This capability is set by the driver to indicate that the queue supports
         cache and memory management hints. However, it's only valid when the
         queue is used for :ref:`memory mapping <mmap>` streaming I/O. See
-        :ref:`V4L2_FLAG_MEMORY_NON_CONSISTENT <V4L2-FLAG-MEMORY-NON-CONSISTENT>`,
         :ref:`V4L2_BUF_FLAG_NO_CACHE_INVALIDATE <V4L2-BUF-FLAG-NO-CACHE-INVALIDATE>` and
         :ref:`V4L2_BUF_FLAG_NO_CACHE_CLEAN <V4L2-BUF-FLAG-NO-CACHE-CLEAN>`.
 

MAINTAINERS

@@ -8764,7 +8764,8 @@ F:	include/drm/i915*
 F:	include/uapi/drm/i915_drm.h
 INTEL ETHERNET DRIVERS
-M:	Jeff Kirsher <jeffrey.t.kirsher@intel.com>
+M:	Jesse Brandeburg <jesse.brandeburg@intel.com>
+M:	Tony Nguyen <anthony.l.nguyen@intel.com>
 L:	intel-wired-lan@lists.osuosl.org (moderated for non-subscribers)
 S:	Supported
 W:	http://www.intel.com/support/feedback.htm
@@ -12104,6 +12105,7 @@ NETWORKING [DSA]
 M:	Andrew Lunn <andrew@lunn.ch>
 M:	Vivien Didelot <vivien.didelot@gmail.com>
 M:	Florian Fainelli <f.fainelli@gmail.com>
+M:	Vladimir Oltean <olteanv@gmail.com>
 S:	Maintained
 F:	Documentation/devicetree/bindings/net/dsa/
 F:	drivers/net/dsa/
@@ -13211,6 +13213,7 @@ F:	drivers/firmware/pcdp.*
 PCI DRIVER FOR AARDVARK (Marvell Armada 3700)
 M:	Thomas Petazzoni <thomas.petazzoni@bootlin.com>
+M:	Pali Rohár <pali@kernel.org>
 L:	linux-pci@vger.kernel.org
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
@@ -16185,7 +16188,7 @@ M:	Leon Luo <leonl@leopardimaging.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 T:	git git://linuxtv.org/media_tree.git
-F:	Documentation/devicetree/bindings/media/i2c/imx274.txt
+F:	Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml
 F:	drivers/media/i2c/imx274.c
 SONY IMX290 SENSOR DRIVER
@@ -18312,7 +18315,8 @@ F:	drivers/gpu/vga/vga_switcheroo.c
 F:	include/linux/vga_switcheroo.h
 VIA RHINE NETWORK DRIVER
-S:	Orphan
+S:	Maintained
+M:	Kevin Brace <kevinbrace@bracecomputerlab.com>
 F:	drivers/net/ethernet/via/via-rhine.c
 VIA SD/MMC CARD CONTROLLER DRIVER
@@ -18917,10 +18921,10 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/mm
 F:	arch/x86/mm/
 X86 PLATFORM DRIVERS
-M:	Darren Hart <dvhart@infradead.org>
-M:	Andy Shevchenko <andy@infradead.org>
+M:	Hans de Goede <hdegoede@redhat.com>
+M:	Mark Gross <mgross@linux.intel.com>
 L:	platform-driver-x86@vger.kernel.org
-S:	Odd Fixes
+S:	Maintained
 T:	git git://git.infradead.org/linux-platform-drivers-x86.git
 F:	drivers/platform/olpc/
 F:	drivers/platform/x86/

Makefile

@@ -2,7 +2,7 @@
 VERSION = 5
 PATCHLEVEL = 9
 SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc8
 NAME = Kleptomaniac Octopus
 
 # *DOCUMENTATION*

arch/arm/boot/dts/bcm2835-rpi.dtsi

@@ -13,7 +13,7 @@ act {
 
 	soc {
 		firmware: firmware {
-			compatible = "raspberrypi,bcm2835-firmware", "simple-bus";
+			compatible = "raspberrypi,bcm2835-firmware", "simple-mfd";
 			#address-cells = <1>;
 			#size-cells = <1>;
 

arch/arm/mach-imx/cpuidle-imx6q.c

@@ -24,7 +24,9 @@ static int imx6q_enter_wait(struct cpuidle_device *dev,
 		imx6_set_lpm(WAIT_UNCLOCKED);
 	raw_spin_unlock(&cpuidle_lock);
 
+	rcu_idle_enter();
 	cpu_do_idle();
+	rcu_idle_exit();
 
 	raw_spin_lock(&cpuidle_lock);
 	if (num_idle_cpus-- == num_online_cpus())
@@ -44,7 +46,7 @@ static struct cpuidle_driver imx6q_cpuidle_driver = {
 		{
 			.exit_latency = 50,
 			.target_residency = 75,
-			.flags = CPUIDLE_FLAG_TIMER_STOP,
+			.flags = CPUIDLE_FLAG_TIMER_STOP | CPUIDLE_FLAG_RCU_IDLE,
 			.enter = imx6q_enter_wait,
 			.name = "WAIT",
 			.desc = "Clock off",