Add Jasmine release notes

Signed-off-by: Sebastian Serewa <sebastian.serewa@huawei.com>

releases/index.rst

@@ -13,3 +13,4 @@ This section contains information related to releases of |main_project_name|.
    :maxdepth: 1
 
    aladeen/0.1.0/release_notes
+   jasmine/1.0.0/release_notes

releases/jasmine/1.0.0/release_notes.rst

+.. SPDX-FileCopyrightText: Huawei Inc.
+..
+.. SPDX-License-Identifier: CC-BY-4.0
+
+.. include:: ../../../definitions.rst
+
+Jasmine - 1.0.0
+###############
+
+About
+*****
+
+The objective of this document is to provide basic introductory information
+about included functionalities, known issues, instructions guidance for
+the Jasmine release of the |main_project_name| project.
+
+The |main_project_name| project serves as a solid base foundation
+for products. It is not a standalone product itself but rather a starting
+project for other projects and products.
+
+Within this release, we moved from the Incubation phase into the Developing phase. 
+In practice, it means that |main_project_name| has become a member project
+of the Eclipse Foundation. We believe that it enables us for further rapid 
+development and extenstion in various markets.
+
+Scope
+*****
+
+**Release codename**: Jasmine
+
+**Release version**: 1.0.0
+
+**Release timeframe**: 2021-04-13 .. 2021-12-20
+
+The Objectives of the Release
+-----------------------------
+
+The objective of the *Jasmine* release is to prepare a solid ground for the Eclipse 
+Foundation onboarding. That includes, but is not limited to:
+
+- Project maturity gain
+- Hardware & Software roadmap expansion
+- IP compliance & policies deployment
+- An extension of the available set of blueprints 
+
+The List of Software Features Included
+--------------------------------------
+
+- Raspberry Pi Hardware Enablement
+  (`REQ#253 <https://git.ostc-eu.org/OSTC/requirements/-/issues/253>`__)
+- Support and default to the 5.10.x LTS Linux Kernel 
+  (`REQ#99 <https://git.ostc-eu.org/OSTC/requirements/-/issues/99>`__)
+- BSP: Add support for Nordic Semiconductor nRF52840 DK 
+  (`REQ#248 <https://git.ostc-eu.org/OSTC/requirements/-/issues/248>`__)
+- Net: Overall IPv6 connectivity for the gateway 
+  (`REQ#96 <https://git.ostc-eu.org/OSTC/requirements/-/issues/96>`__)
+- Net: Support open-source 802.11 stack on Linux OS 
+  (`REQ#296 <https://git.ostc-eu.org/OSTC/requirements/-/issues/296>`__)
+- IP Compliance: Openchain 2.1 compliant IP policy 
+  (`REQ#240 <https://git.ostc-eu.org/OSTC/requirements/-/issues/240>`__)
+- Experimental UI framework LVGL 
+  (`REQ#279 <https://git.ostc-eu.org/OSTC/requirements/-/issues/279>`__)
+
+Please note that there is a set of blueprints available which could be built using this 
+release. However, we can not guarantee that all newly developed blueprints will work 
+with the previous releases of the |main_project_name|.
+
+In case of any doubts, please refer to a blueprint's documention or contact us using any 
+of the communication channels available.
+
+Supported Hardware Platforms
+----------------------------
+
++------------------------------------------------------+-------------------+---------------------------------------+
+| Board (chipset)                                      | Supported kernels | Board documentation                   |
++======================================================+===================+=======================================+
+| Avenger96 (STM32 - Cortex-A7 & Cortex-M4)            | Linux & Zephyr    | :ref:`SupportedBoardAvenger96`        |
++------------------------------------------------------+-------------------+---------------------------------------+
+| Arduino Nano (nRF52840 - Cortex-M4)                  | Zephyr            | :ref:`SupportedBoardArduinoNano33BLE` |
++------------------------------------------------------+-------------------+---------------------------------------+
+| Nitrogen (nRF52832 - Cortex-M4)                      | Zephyr            | :ref:`SupportedBoardNitrogen`         |
++------------------------------------------------------+-------------------+---------------------------------------+
+| nRF52840-DK (nRF52840 - Cortex-M4)                   | Zephyr            | :ref:`SupportedBoardnRF52840DK`       |
++------------------------------------------------------+-------------------+---------------------------------------+
+| RaspberryPI 4b (BCM2711)                             | Linux             | :ref:`raspberrypi`                    |
++------------------------------------------------------+-------------------+---------------------------------------+
+| Seco SBC-B68-eNUC (Intel x86)                        | Linux             | :ref:`SupportedBoardSecoB68`          |
++------------------------------------------------------+-------------------+---------------------------------------+
+| Seco SBC-C61 (NXP i.MX 8M - Coretex-A53 & Cortex M4) | Linux             | :ref:`SupportedBoardSecoC61`          |
++------------------------------------------------------+-------------------+---------------------------------------+
+
+Test Report
+-----------
+
+Not available for this release.
+
+Installation
+************
+
+:ref:`Quick Build <OniroQuickBuild>` provides an example of how to build
+the |main_project_name| project for a supported target. Visit the
+:ref:`Hardware Support <HardwareSupport>` section for instructions on how to
+build for other supported targets.
+
+Visit :ref:`setting up a repo workspace <RepoWorkspace>` for instructions how to prepare 
+workspace for development. 
+Since |main_project_name| uses repo tool for its development, you can use the release tag
+for the repo init commands as follows:
+
+.. code-block:: console
+
+    repo init -u https://booting.oniroproject.org/distro/oniro.git -b v1.0.0
+
+Known Issues
+------------
+
+1. The Avenger96 target (stm32mp1-av96) does not ship with firmware files for Bluetooth, 
+   WiFi, and the image processor by default. We are working on a solution to 
+   re-distribute them during the normal image build for this board.
+2. Adding package_management feature breaks passwordless root login.
+3. Smart Panel blueprint - Avenger96 HDMI Display problems.
+
+Source Code Available
+---------------------
+
+For more details on our repo structure, see:
+
+`OniroProject's GitLab <https://booting.oniroproject.org/distro/>`__ document
+
+The release is signed with the key:
+
+.. code-block::
+
+   -----BEGIN PGP PUBLIC KEY BLOCK-----
+   mDMEYaTV2hYJKwYBBAHaRw8BAQdAhCeM7i/qPIdJMs9SjBAYYsZ0lEhkJExfScVV
+   3PCAMNy0RU9uaXJvIFByb2plY3QgSmFzbWluZSBSZWxlYXNlIFNpZ25pbmcgS2V5
+   IDxzdGVmYW4uc2NobWlkdEBodWF3ZWkuY29tPoiWBBMWCAA+FiEEg6LprPlSFnVN
+   ljMIypzNhbi9XNYFAmGk1doCGwMFCQYGewAFCwkIBwIGFQoJCAsCBBYCAwECHgEC
+   F4AACgkQypzNhbi9XNa2UwD9El6WIkKBoZ/xAOdg/eUTe4ltzjyrMznGTjltuLS8
+   iq0A/iBrx+e9Jod5j3t9U5a99BTUWEe1hHi2lyAeGyCgvyoHuDgEYaTV2hIKKwYB
+   BAGXVQEFAQEHQJ+oeI2KvnvYtIixZc6uZGA6fhNFrBIQdVk65jU6/GcFAwEIB4h+
+   BBgWCAAmFiEEg6LprPlSFnVNljMIypzNhbi9XNYFAmGk1doCGwwFCQYGewAACgkQ
+   ypzNhbi9XNYaagD/eslWmRnEyp12tlLYKamSFCXHbescDpFIEG4SZ3tSG/gBAJj+
+   UYCroIIYHatvtVRtCmLXFRvx7eXmrFtzBJV7oXAH
+   =XpqZ
+   -----END PGP PUBLIC KEY BLOCK-----
+
+DevOps Infrastructure
+*********************
+
+To learn more about our approach to CI (Continuous Integration) strategy used for this 
+release, please see:
+
+:doc:`/ci/index` document
+
+Testing
+-------
+
+For more details please refer to:
+
+:doc:`/ci/device-testing` document
+
+Contributions
+*************
+
+If you are a developer eager to know more details about |main_project_name| or
+just an enthusiast with a patch proposal, you are welcome to participate in our 
+|main_project_name| ecosystem development. To do so, please sign-up using the process 
+described below:
+
+:doc:`/contributing/index` document
+
+License
+*******
+
+Project manifest as well as project-specific meta-layers, recipes and
+software packages are, unless specified otherwise, published under
+Apache 2.0 license. The whole operating system built by users from the
+project manifest is an aggregate comprised of many third-party components
+or component groups, each subject to its own license conditions.
+
+Official project release includes only the project manifest as well as
+project-specific meta-layers, recipes.
+Any reference binary image, build cache, and any other build
+artifacts are distributed as a convenience only and are not part of the
+release itself.